Smartphones of the brand Xiaomi have held a leading position in the market for many years due to their excellent price-quality ratio, but the shell interface MIUI or HyperOS This module can be confusing for beginners. The most basic function—wireless network access—is sometimes hidden behind unfamiliar icons or blocked by system errors that require immediate attention. In this article, we'll cover all the ways to activate the module in detail, from standard buttons to advanced system settings.
Users often encounter a situation where the slider in the notification shade doesn't respond to taps, or the icon simply disappears from view. This can be caused by a software glitch in the operating system. Android, as well as physical damage to the antenna module after a fall. Understanding how network interfaces work will help you quickly diagnose the problem and restore your internet connection without calling a service center.
We will consider not only the standard methods of inclusion, but also the nuances of working with hidden networks, frequency ranges, and power-saving modes, which often block the adapter's operation. Properly configuring connection parameters can significantly improve data download speeds and signal stability in areas with poor reception.
Quick activation via the control panel
The most obvious and quick way to start searching for available access points is to use the notification panel, which is in the shell MIUI It's called a "curtain." To do this, unlock your smartphone's screen and swipe down from the top edge of the display. In the menu that opens, you'll see a row of icons, including a fan-shaped icon or a "V" symbol, which denotes wireless connectivity.
If a standard single tap doesn't work, try holding your finger on the icon Wi-Fi for a couple of seconds. This action will open an advanced settings menu, where you can not only enable the module but also directly select the desired network from the list or go to detailed configuration. In some firmware versions, the system may request location permission upon first startup, as this is necessary for scanning the surroundings.
⚠️ Note: If the icon in the notification shade is gray and does not switch to an active state, your phone may be in Airplane or Power Saver mode, which forcibly turns off the radio modules to conserve battery power.
It is important to note that in new versions HyperOS The widget logic has changed slightly, and accessing the full list of networks now requires a long press rather than a simple click. This is to prevent accidental disconnections in your pocket and to optimize space on the lock screen.
Setting up via the system menu
If widgets on your screen aren't working properly or an icon has disappeared, there's always the reliable classic method of accessing them through the main settings menu. This method guarantees access to all available options, even if the notification interface is frozen. Find the app labeled "Settings" and featuring a gear icon; it's usually located on the home screen or in the "Tools" folder.
Inside the menu, find a section that, depending on the firmware version, may be called "Wi-Fi," "Wireless Networks," or simply appear first in the list. Once there, you'll see the main switch that needs to be enabled. This is where advanced settings, such as frequency band selection and MAC address management, are located.
For users who want to optimize their connection, it is useful to know about the existence of advanced settingsIn this section, you can manually set DNS servers, change proxy settings, or configure a static IP address if your router doesn't assign one automatically. This is especially useful for corporate networks or when using specialized network equipment.
☑️ Checking Wi-Fi settings
It's worth mentioning that the settings menu also includes a "Wi-Fi Assist" feature, which allows the phone to automatically switch to mobile data if the wireless signal becomes too weak. This feature is useful for video streaming, but it can consume data, so it's important to monitor it.
Using the voice assistant and hotkeys
Modern smartphones Xiaomi equipped with powerful voice assistants such as Google Assistant or built-in Xiao AI (in Chinese versions). If your hands are busy or the screen isn't responding to touch, you can simply say "Turn on Wi-Fi." The system will recognize your request and perform the action instantly, eliminating the need to tap the screen.
In addition to voice control, you can set up "Quick Commands" or automation scenarios. For example, you can create a rule that tells your phone to automatically turn on your wireless network when you arrive home or connect to a specific device. Bluetooth device in the car. This eliminates routine daily activities.
Advanced users can use the "One-Finger Control" feature or a stylus, if the smartphone model supports it. By assigning a specific action to a long press or double-tap on the back cover, you can quickly toggle the network status. However, these settings require prior calibration in the Accessibility section.
Secrets of voice control
The voice assistant may not work if the microphone is blocked by another app or if voice input access for system commands is disabled in privacy settings. Also, make sure the interface language and the voice assistant language match for better recognition.
Please note that voice control requires an active internet connection to process some commands on the server, so if the connection is completely lost, this method may not work and you will have to rely on haptic control.
Solution: The module does not turn on
The situation when the Wi-Fi slider becomes gray and does not respond to taps is one of the most common problems on devices. XiaomiThis often indicates a temporary failure in the operating system drivers. AndroidIn most cases, a simple reboot of the device helps, which resets all temporary processes and re-initializes the hardware.
If rebooting doesn't help, it's worth checking for system updates. Developers regularly release patches that fix network module bugs. Go to the "About phone" section and tap on the MIUI version to check for a new firmware. Sometimes the problem lies in a bug in a specific software version.
⚠️ Attention: If the problem with turning on the module persists after resetting the network settings and reflashing the firmware, there is a high probability of physical separation of the antenna cable or chip failure, which will require repair at a service center.
Another possible cause could be a conflict with installed software. Some applications, especially those requiring deep system access (root privileges) or VPN clients, can block the network interface. Try booting your phone in safe modeto eliminate the influence of third-party software.
| Problem | Possible cause | Solution method |
|---|---|---|
| The slider is gray | Driver or OS failure | Restart or reset network settings |
| The icon has disappeared | Launcher interface error | Clearing the Settings app cache |
| Network not found | Invalid region or frequency | Change the region in the settings or router |
| Constant about |