Modern smartphones such as Honor 9X, have long ceased to be just devices for making calls, turning into powerful tools for creating local networks. The ability to turn your gadget into mobile router becomes critical when you are away from home or office and need internet access on your laptop or tablet right now.
Owners Honor 9X We often need to quickly set up a hotspot, but the EMUI interface can have its own nuances that differ from standard Android. In this article, we'll cover in detail all the methods for activating tethering, configuring security settings, and troubleshooting common issues that may arise along the way.
You'll learn not only about the classic method via the settings menu but also about less obvious methods of data distribution, such as using a USB cable or Bluetooth connection. This will allow you to choose the most optimal option based on your operating conditions and connection speed requirements.
Preparing the device and checking the tariff plan
Before you begin setting up, you need to make sure your device is ready to work in access point mode. Mobile Internet The SIM card must be active and have a sufficient signal strength, as this is what will be broadcast to other devices. Check your SIM card balance and make sure your carrier isn't blocking data sharing.
⚠️ Please note: Many mobile operators automatically detect internet tethering and may block it or require an additional plan. Be sure to check your plan's terms in your operator account before activating the hotspot.
It is also worth checking the battery status, since operation in the mode Wi-Fi Hotspot significantly increases power consumption. If the battery charge is below 20%, it is recommended to connect the smartphone to a charger to prevent unexpected shutdown.
Make sure your device has the latest system updates. The manufacturer regularly releases patches to improve the stability of network modules. Go to Settings → System and updates → Software updateto check for new versions.
The classic way to enable an access point is through settings
The most common and convenient method for activating network sharing is to use the built-in system settings menu. This method allows you to flexibly configure network parameters, including the name, password, and frequency range. To get started, open the main menu and find the section Settings.
Next you should go to the subsection Wireless networks or Connections, where the point is located Modem modeIn some firmware versions, this option may be called "Access Point and Modem." This is where all the necessary switches are located.
☑️ Checklist before enabling distribution
After entering the menu, select the option Wi-Fi hotspotBefore launching the system for the first time, you're often prompted to configure security settings. It's recommended to set a strong password from the start to prevent unauthorized access to your traffic.
Turn on the switch at the top of the screen to activate the mode. Now your device Honor 9X Broadcasts a network that can be found in the list of available connections on your laptop or tablet. Connection speed will depend on the quality of the cellular signal.
Setting up a network name and security settings
By default, the system offers a standard network name containing the device model, which isn't always convenient for identification in public places. To change this, tap on Access Point Name (SSID) and enter the desired name.
Particular attention should be paid to the encryption type. In today's reality, the only correct choice is the standard WPA2 PSK or newer WPA3, if it's supported by the devices connecting. Using outdated protocols like WEP makes your network vulnerable to hacking in minutes.
| Parameter | Recommended value | Description |
|---|---|---|
| Frequency range | 2.4 GHz | Maximum compatibility with all devices |
| Security protocol | WPA2/WPA3 | High level of protection of transmitted data |
| User limit | 4-6 | Optimal amount for stable speed |
| Time-out | 10 minutes | Automatic shutdown when there are no clients |
In this menu, you can also set a limit on the number of connected devices. This is a useful feature that will prevent bandwidth congestion if someone tries to access your network. Typically, the system allows up to 8-10 devices to be connected simultaneously.
Sharing the Internet via USB cable and Bluetooth
It's not always convenient to use a wireless connection, especially if you need maximum stability or want to save your smartphone's battery. In such cases, a wired connection via USB cable.
To activate this mode, connect Honor 9X to the computer using a high-quality cable. Then, in the "Modem Mode" menu, activate the switch USB modemThe system will automatically install the necessary drivers, and the computer will recognize the phone as a wired network connection.
An alternative, although slower, option is distribution via BluetoothThis method is useful if the USB port is occupied and the Wi-Fi module on the receiving device is faulty. The pairing process takes longer, and the data transfer speed is limited by the Bluetooth protocol.
⚠️ Note: When connecting via USB modem, your computer may attempt to install synchronization software (such as HiSuite). If you only need internet access, decline the installation.
The advantage of a USB connection is that the smartphone simultaneously receives a charge from the computer, offsetting the energy consumed by data transfer. This is ideal for extended laptop use while traveling.
Using the widget and quick settings
For those who need to turn internet tethering on and off several times a day, there's a quicker way via the notification panel. This eliminates the need to delve into a deep settings menu each time.
Swipe down from the top of the screen to open the Control Center. Find the icon Access point (It usually looks like an antenna with waves.) If you don't see it on the first page, swipe left or tap the edit panel button.
Adding a widget to your homescreen is another option for the lazy. In the widget menu, find the "System" or "Settings" section and drag the hotspot toggle icon to the home screen. Now you can activate it with a single tap.
Why might the widget not work?
In some EMUI versions, quick toggle widgets may be restricted by security. If the widget won't enable, check the permissions for the Settings app in Apps → Permissions.
However, it's important to remember that you can't change the password or network name through quick settings. This method is intended solely for quickly switching an existing connection.
Solving common connection problems
Despite the ease of setup, users may encounter a situation where devices cannot see the network or obtain an IP address. The problem is often related to the frequency range: some older laptops do not support 5 GHz, so it's worth switching to 5 GHz in the access point settings. 2.4 GHz.
If you have a connection but the internet isn't working, try resetting your network settings. Go to Settings → System → Reset and select Reset network settingsThis action will delete saved Wi-Fi passwords and Bluetooth settings, but often resolves network driver conflicts.
Another possible cause is an overflowing list of connected devices. If the limit is reached, new devices will be unable to connect to the network. Check the list of clients in the access point menu and, if necessary, disable unnecessary ones or increase the limit.
In rare cases, a simple device reboot helps. This clears the temporary network service cache and restores normal operation of the communication modules.
FAQ: Frequently Asked Questions
Is it possible to share Wi-Fi if your phone doesn't have a SIM card?
No, you need an active SIM card with a data plan to use mobile data tethering. However, if the Honor 9X is connected to a Wi-Fi network, some versions of Android allow you to rebroadcast the signal, but this isn't possible using standard tools; root access is required.
Does the phone get very hot when distributing?
Yes, operating the radio module in access point mode generates increased heat. It is recommended to remove the case for better heat dissipation and not cover the device with fabric while in use.
Why does my laptop see the network, but it says "No Internet access"?
This could mean your smartphone has run out of data, your device's connected limit has been reached, or your carrier is blocking data sharing. Check your balance and APN settings.
How do I know who is connected to my hotspot?
The Honor 9X's hotspot settings menu has a "Connected Devices" section. It displays a list of all devices, their MAC addresses, and the amount of data transferred. You can block any device from this list.
Does Wi-Fi sharing affect the speed of mobile internet on the phone itself?
Yes, the bandwidth is shared between all connected clients. If one laptop starts downloading a large file, the speed on the smartphone and other devices will drop significantly.