Needing to connect a new device to a wireless network but having forgotten or lost the access key is one of the most common problems in home IT infrastructure. Users of providers such as ByFly, often find themselves having to remember the complex combination of characters they entered during the initial setup of their equipment. Fortunately, modern technologies and router interfaces make it possible to recover this information fairly quickly if you have physical access to the device or computer already connected to the network.
There are several proven methods for recovering forgotten login credentials, ranging from simply inspecting the router's casing to using the operating system's command line. In this article, we'll examine each method in detail, focusing on the specifics of the equipment used by the Belarusian ISP. It is important to understand, that the recovery method will depend on your router model, firmware version, and the type of device you plan to use to perform the check.
Before taking any action, it's worth noting that the security of your home network directly depends on the strength of your password. If you decide to change your current settings after restoring them, make sure the new combination is secure. We'll cover not only the technical aspects of viewing saved keys but also the nuances of using the interfaces of popular router models, such as TP-Link, Huawei And ZTE, which are most often found on networks ByFly.
Finding factory data on the router case
The easiest and quickest way to find out the default connection details is to physically inspect the device itself. Most manufacturers place a technical information sticker on the bottom or back of the device. This sticker typically indicates the default network name (SSID) and the factory password, which is often labeled as Wireless Key, WPA/WPA2 Key or simply Password.
If you've never changed the security settings since your provider installed the equipment, this information is accurate. However, if you have children or guests in the house who could accidentally change the configuration, or if the technician changed the default key during installation, this method may not work. In this case, the sticker may also contain the web interface address and login/password for accessing the settings, allowing you to manually check the current settings.
⚠️ Attention: If the sticker indicates that the WiFi password matches the PIN, and you've changed it, the factory settings are no longer valid. In this case, you'll need to use software recovery methods via a connected device.
Keep in mind that stickers may fade or wear off over time, making the text illegible. In such cases, use your phone's flashlight or take a photo of the sticker and increase the contrast on your computer—this often helps make worn-out characters more legible. Also, pay attention to letter case, as it's critical for factory passwords.
Viewing your password through Windows settings
If you already have a computer running an operating system connected to your wireless network Windows, recovering a forgotten key will only take a couple of minutes. The operating system stores the profiles of all networks the user has ever connected to in a secure manner, but allows authorized users to view saved passwords.
To access this information, open "Settings" from the Start menu and go to "Network & Internet." Next, select "Change adapter settings" or "Advanced network settings." Find your active wireless connection in the list of connections. Once the network status is displayed, click "Wireless network properties" and go to the "Security" tab.
☑️ Check Windows settings
It is on the “Security” tab that the “Network Security Key” field is located, the contents of which are hidden by asterisks. Check the box Next to "Show entered characters," the system will display your current password in plain text. This method works on all current versions of Windows, including 10 and 11, and doesn't require any additional software.
On some corporate or strictly configured home networks, access rights may be restricted by group policies, making the Properties button inactive. If you encounter this situation, try running the command prompt as an administrator. Enter the command netsh wlan show profile name="Network_Name" key=clear, replacing "Network_Name" with the exact name of your WiFi. The code you're looking for will be displayed in the "Key Contents" line in the "Security Settings" section.
Using the ByFly mobile app
Modern providers strive to make service management as simple as possible for their subscribers by introducing functional mobile applications. For customers ByFly (operator A1) There is an official application "My A1", which allows you to manage tariffs, services and, importantly in our context, home Internet settings.
After logging into the app using your phone number or account, navigate to the section for your landline or home internet services. The home network management interface often offers the option to view or change the network name and password. This is especially convenient, as it allows you to not only view the current information but also immediately set a new, more memorable access key.
What should I do if the app doesn't show my password?
In some app versions, the password viewer feature may be hidden or require additional confirmation via SMS. If you don't see the option, try going to the "Router Settings" or "WiFi Management" sections, which may offer advanced wireless network management features. Also, make sure the app is updated to the latest version.
The app's functionality may vary depending on your router model. If the device supports remote management technology (for example, via the TR-069 protocol), changing the password through the app will occur instantly and apply to all connected devices. Otherwise, the app can only display the current settings read directly from the device.
⚠️ Attention: The mobile app interface and available features may change following service updates. If you don't see the options described, check the current menu location in the app's help section or on the operator's official website.
Login to the router's web interface
The most universal and reliable method, which works regardless of the connected device's operating system, is to access the router's control panel via a web browser. To do this, you need to know the default gateway IP address for the equipment. ByFly most often is 192.168.1.1 or 192.168.0.1The address may also be indicated on a sticker under the device body.
In the browser's address bar, enter the router's IP address and press Enter. The system will prompt you for your username and password to log in to the admin panel. The default credentials are often admin/admin, admin/1234 or listed on the same sticker as your WiFi information. If you've changed your login password and forgot it, you'll need to reset your router to factory settings.
After successfully logging into the interface, navigation will vary depending on the device manufacturer. For popular models used by the ISP, the path to the wireless network settings looks like this:
| Router model | Path to WiFi settings | Security tab | Password field |
|---|---|---|---|
| Huawei | Basic → WLAN | WLAN Basic Configuration | WPA PreSharedKey |
| TP-Link | Wireless → Wireless Security | Wireless Security | PSK Password |
| ZTE | Network → WLAN → Security | Security Settings | WPA Passphrase |
| Eltex | Wi-Fi → Settings | Main | Password |
Once you find the appropriate field, you can view the current password or set a new one. Don't forget to save Confirm the changes you've made by clicking "Save" or "Apply," otherwise the settings won't be applied. After changing the password, all devices connected to the network will lose connection and require re-authorization with the new key.
Restoring access on Android and iOS
Smartphone owners can also find out the WiFi password if the device is already connected to the network. On devices with the operating system Android versions 10 and above, as well as on iOS Version 16 and later includes the ability to view and share passwords via QR code.
On Android Go to "Settings" → "Connections" (or "Network & Internet") → "Wi-Fi." Tap the name of your active network or the gear icon next to it. In the menu that opens, select "QR code" or "Share." A QR code will appear on the screen, often (but not always) followed by a password in text. If there is no text, you can scan this code with another phone or a special QR scanner app, which will display a connection string containing the password. P:.
Users iPhone Saved passwords can be found in the Settings → Passwords menu. After authenticating with Face ID or Touch ID, find the entry with your WiFi network name in the list of websites and apps. Tapping it will reveal the "Password" field, which you can copy or speak. This method is the most convenient for the ecosystem. Apple.
Resetting your router as a last resort
If none of the software methods help, and the factory sticker has worn off or been lost, the only option is to perform a full reset of the router to its factory settings. This procedure will return all settings, including the network name and password, to the values indicated on the sticker under the device.
To perform a reset, locate the small hole marked on the back of the router. Reset or DefaultWith the router turned on, gently press the button inside the hole with a thin object (such as a paperclip or toothpick) and hold for 10-15 seconds until the indicators flash simultaneously. After rebooting, the device will operate with factory settings.
⚠️ Attention: After resetting the router, it will no longer connect to the internet until you reconfigure the PPPoE connection or enable automatic setup from your ISP. Make sure you have a contract with your ISP or the necessary login information (username and password) as these will also be deleted.
This method requires technical literacy, since after the reset you need to re-enter the connection parameters to the provider's network ByFlyIf you're unsure, it's best to contact technical support or call a technician to avoid being left without network access for an extended period.
Frequently Asked Questions (FAQ)
Where can I find my login and password to access my router settings if I changed them and forgot them?
If you've changed the default login credentials for the admin panel and forgotten them, there's no way to restore them. The only solution is to perform a full reset of the router using the button. Reset, after which the factory login and password indicated on the sticker will be restored.
Is it possible to find out the password for my neighbor's ByFly WiFi?
No, technically and legally, accessing someone else's wireless network without the owner's permission is prohibited. The methods described in this article only work for networks your device already has access to, or has previously had access to, and require physical access to the router or an authorized computer.
What should I do if the password sticker on my router has completely worn off?
In this case, try logging into the router's web interface using the default factory credentials (often admin/admin), which can be found in the specific model's manual online. If you've successfully logged into the settings, you can find the WiFi password in the wireless network section. If logging in is blocked by a changed password, a factory reset will be the only solution.
Does changing your WiFi password affect your internet speed?
Changing your password itself doesn't affect your internet connection speed. However, if you decide to change the encryption type (for example, from WPA2 to WPA3 or WEP) during the password change process, this may impact compatibility with older devices and, consequently, their connection speed. It is recommended to use the standard WPA2-PSK (AES).
How often should I change my WiFi password?
Security experts recommend changing your home network password every 6-12 months, especially if you frequently have guests over and share the access key with them. Regularly changing your password minimizes the risk of unauthorized access and the use of your network for illegal purposes.