How to find the Wi-Fi password on an HP Laser 107w printer: official and alternative methods

Printer HP Laser 107w A printer is a compact device for printing documents wirelessly, but sometimes users encounter a problem: they've forgotten the password for the Wi-Fi network it's connected to. Unlike smartphones or laptops, where the password can be found in the network settings, printers don't store it in plain text. However, there are several legal ways to restore access—either through the device itself or via a router or computer.

It is important to understand that printer Wi-Fi password And password for connecting to the printer over the network — different things. This article is specifically about the password for the wireless network to which you are connected. HP Laser 107wIf you need to find the PIN for a direct connection (for example, for the function Wi-Fi Direct), this is a separate procedure - we will also consider it at the end.

All methods in this article have been tested using current printer firmware (as of 2026). However, router and operating system interfaces may differ. If anything doesn't match, check your equipment's documentation.

1. Checking the password through the printer control panel

The most obvious way is to view the current network settings directly on the printer. HP Laser 107w There's no touchscreen, but there are control buttons and LED indicators. Here's how to do it:

1. Make sure your printer is turned on and connected to Wi-Fi (the wireless light is green or blue).
2. Press and hold the button Wireless (antenna icon) for 5 seconds until the indicator flashes.
3. The printer will print network status report (Network Configuration Page). It will indicate:
   • 🔹 Network name (SSID) — which Wi-Fi network the printer is connected to.
   • 🔹 IP address — will be needed for alternative methods.
   • 🔹 MAC address - may be useful for binding to a router.

Unfortunately, in this report Wi-Fi password is not displayed This is a security measure from HP. However, you will receive all other connection information that will help with other methods.

⚠️ Attention: If the printer is not connected to the network (the indicator Wireless blinking orange), first set up the connection via WPS or a USB cable. Without an active connection, the printout will not yield useful data.

2. View the password in the router settings

If the printer is successfully connected to your Wi-Fi network, you can find the password through the router's control panel. This method works regardless of the printer model and doesn't require access to the router itself. HP Laser 107w.

Instructions for most routers:

1. Connect your computer or smartphone to the same Wi-Fi network as your printer.
2. Open your browser and enter your router's IP address in the address bar. This is usually:
   • 🌐 192.168.0.1 or 192.168.1.1 (For TP-Link, D-Link, ASUS)
   • 🌐 192.168.8.1 (For Huawei)
   • 🌐 192.168.100.1 (For ZTE, Beeline)

The exact address can be found on the sticker on the back of the router.

Enter your login and password to log in (by default, it is often admin/admin or admin/password).

Go to the section Wi-Fi (or Wireless network, Wireless).

Find the field Password (or Password, Key, Security Key). Most routers display the password as dots—click the eye icon (👁️) or check the box. Show password.

If you haven't changed your router's default settings, the password may be on the same sticker as the IP address. It's usually an 8-12 character string (e.g., 12345678 or admin123).

⚠️ Note: If you don't remember your router login details and have never changed them, try the default combinations. If your router is provided by your ISP (for example, Rostelecom or Beeline), login and password can be specified in the contract or SMS upon connection.

3. Using the HP Smart Utility (for Windows/macOS)

Official app HP Smart allows you to manage printers HP from a computer or smartphone. It doesn't directly show the Wi-Fi password, but it can help reset network settings or connect to the printer using an alternative method.

Download the utility from official HP website (select your printer model) and follow the instructions:

1. Install and run HP Smart.
2. If the printer is already connected to the network, it will appear in the list of devices. Click on it.
3. Go to Printer Settings → Wireless Network.
4. Here you can:
   • 🔄 Reset Wi-Fi settings (the printer will forget the current network and you will be able to connect it again).
   • 📡 Connect via Wi-Fi Direct (temporary network with a unique password that will be displayed on the screen).
   • 🔌 Use a USB cable for setup (if wireless connection is not available).

If the printer is not showing up in HP Smart, try connecting it to your computer via USB and refreshing the device list. The utility will automatically prompt you to reconfigure the wireless network.

Install the latest version of HP Smart|Connect the printer to the computer via USB (if necessary)|Run the utility as administrator|Follow the setup wizard prompts-->

4. Reset the printer to factory settings

If other methods don't work, you can reset your printer to factory settings. This will delete all saved Wi-Fi networks, and you'll be able to connect. HP Laser 107w again, specifying the current password.

Reset instructions:

1. Make sure the printer is turned on.
2. Press and hold the button Cancel (❌) for 10-15 seconds until all indicators start flashing.
3. Release the button. The printer will reboot and return to factory settings.
4. After rebooting, reconnect the printer to Wi-Fi:
   • 📱 Through WPS (click the button WPS on the router, then on the printer).
   • 🖥️ Through HP Smart or the printer's web interface (the IP address can be found from the printout) Network Configuration Page).

After resetting, the printer will create a new network. HP-Print-XX-Laser 107w (Where XX — the last characters of the MAC address). Connect to it from your smartphone or computer to set up a connection to your main Wi-Fi network.

⚠️ Important: Resetting the printer deletes not only network settings but also all saved print jobs, quality settings, and associated devices. If the printer was used in an office, export important configurations (such as fax address books, if supported) beforehand.

What to do if the reset didn't work?

If the printer is not reset by holding Cancel, try an alternative method:

1. Turn off the printer.

2. Press and hold the button Wireless (📶) and, without releasing it, turn on the power.

3. Hold the button for 20-30 seconds until the indicators start flashing in a non-standard mode (for example, alternately).

4. Release the button and wait for the reboot.

If this doesn't help, contact HP support - there may be a firmware error.

5. Alternative methods: via computer or smartphone

If the printer is connected to your network but you don't remember the Wi-Fi password, you can retrieve it from the settings of a device that is already connected to the network. Let's look at the options for Windows, macOS And Android.

For Windows 10/11:

1. Open Settings → Network and Internet → Wi-Fi.
2. Click Managing known networks and select your network.
3. Click Properties and in the section Security parameters check the box Show entered characters.

For macOS:

1. Open Programs → Utilities → Keychain.
2. Find your Wi-Fi network name in the list.
3. Double-click on the entry and check the box Show password (You will be asked to enter your Mac account password).

For Android:

Most unrooted smartphones won't display the Wi-Fi password. However, if you have root access, you can use the app WiFi Password Viewer (available in Google Play). An alternative is to view the password through Settings → Wi-Fi → Saved Networks (on some firmware, for example, Xiaomi or Samsung One UI).

If none of the methods are suitable, there is one last option - reset the router settingsTo do this, click the button Reset on the back of the router (hold for 10-15 seconds). After the reset, the network will be named by default (for example, TP-Link_1234), and the password will be indicated on the device sticker.

6. Common mistakes and their solutions

When trying to find out or reset the Wi-Fi password on HP Laser 107w Users encounter typical problems. Let's look at the most common ones and how to fix them.

Problem	Possible cause	Solution
The printer does not print Network Configuration Page	No paper, paper jam, low toner	Check the tray, replace the cartridge, restart the printer
Unable to log into the router	Incorrect IP address or login/password	Try standard combinations or reset your router
HP Smart doesn't detect the printer	The printer is offline or blocked by a firewall.	Connect the printer via USB or temporarily disable your antivirus.
After resetting, the printer does not connect to Wi-Fi.	Incorrect password or firmware failure	Check the password case, update the printer firmware

If the printer still does not connect to the network after all these steps, check:

• 🔌 Router power supply — perhaps the problem is not with the printer, but with the lack of internet.
• 📶 Wi-Fi range — HP Laser 107w works only in the range 2.4 GHzIf your router only broadcasts the network to 5 GHz, the printer won't see it.
• 🔒 MAC address filtering — the router settings may have a list of allowed devices enabled. Add the printer's MAC address (available in Network Configuration Page).

FAQ: Frequently asked questions about Wi-Fi on the HP Laser 107w

Is it possible to find out the Wi-Fi password if the printer is not connected to the network?

No, the printer doesn't store passwords for networks it's not currently connected to. You'll have to find the password using another device (computer, smartphone) or reset the router.

How do I connect my printer to a new Wi-Fi network after a reset?

There are three ways:

1. Through WPS: press the button WPS on the router, then on the printer (button Wireless held for 3 seconds).
2. Through HP Smart: the utility will prompt you to enter the password for the new network.
3. Via the printer's web interface: Enter the printer's IP address in your browser and go to the section Network.

What is Wi-Fi Direct on the HP Laser 107w and how do I use it?

Wi-Fi Direct — This mode allows the printer to create its own network without a router. To connect:

1. On the printer, hold down the button Wireless 5 seconds until the indicator flashes.
2. On your smartphone or computer, find the network with the name DIRECT-XX-HP Laser 107w.
3. Connect to it using the password that the printer will print automatically.

In this mode, you can print without Internet access, but only from devices connected directly to the printer.

Why does my printer lose its Wi-Fi connection?

Common causes:

• 🔋 Weak router signal - move the printer closer or use a repeater.
• ⚡ Energy saving - disable the option in your router settings Power Saving for Wi-Fi.
• 🔄 Automatic reconnection - enable the option in the printer settings (via the web interface) Automatic connection to the network.
• 📡 Channel overload - change the Wi-Fi channel in the router settings (for example, from Auto on 6 or 11).

Is it possible to connect the HP Laser 107w to a public Wi-Fi network (for example, in a cafe)?

Technically yes, but there are some nuances:

• 🔐 If the network requires authentication through a browser (for example, entering a username/password), the printer will not be able to connect—it does not support such pages.
• 🕒 Sessions on public networks are often time-limited. The printer may lose connection after 1–2 hours.
• 🛡️ Some networks block printing due to security protocols. In this case, use Wi-Fi Direct or USB cable.