How to find out or recover the password for the Siberian Bear Wi-Fi network

Forgot your home Wi-Fi password? Siberian Bear and can't connect to a new gadget? Or friends are over, and you don't remember the password you entered six months ago? This situation is familiar to many people—especially if the password is automatically generated and looks like a1B2c3D4!e5Fortunately, there are several ways to restore network access, and most users won't need to call support or a technician.

In this article we will look at all official and safe methodsto find out the password for the router Siberian Bear — from simply viewing the sticker on your device to performing a factory reset. You'll also learn how change your password to something more memorable and why you shouldn't use standard combinations like 12345678 or qwertyAll instructions are relevant for router models that the provider leases or sells to customers (for example, Sagemcom F@st 2804, Sercomm RV6699 and others).

⚠️ Important: If your router is owned by your provider (for example, if you pay a monthly fee for its rental), resetting the settings may result in loss of internet access. In this case, after the reset, you will need to reactivate the equipment through your personal account or call support.

📊 How do you usually store Wi-Fi passwords?
I write it down in a notebook
I save it in my phone notes.
I use a password manager
I don't save it at all, I remember it by heart

1. Check the sticker on your router - the fastest way

If you have never changed your Wi-Fi password after connecting the router, then the combination you are looking for is indicated on sticker on the bottom or back of the device. It is usually located next to the serial number (S/N) and MAC address.

Look for the lines:

  • 🔑 Wi-Fi Password (or Key, Passphrase, Network Key) - this is the password.
  • 📡 SSID (or Wi-Fi Name) — the name of your network, so as not to confuse it with neighboring ones.
  • 🔧 Admin Password — password for entering the router settings (useful in the following methods).

📌 Example: if the sticker states:

SSID: SibirMedved_1234

Password: 9Fd3K8pL2m

- this means that to connect to Wi-Fi you need to select a network SibirMedved_1234 and enter the password 9Fd3K8pL2m.

⚠️ Attention: If the sticker is worn off or painted over, try shining a flashlight on it at an angle—sometimes the symbols become legible. Don't use alcohol or solvents to clean it, as this may permanently remove the paint.

2. Login to your router's personal account via a browser

If the password has changed but you remember the router login information (administrator login and password), you can view the current Wi-Fi key in the web interface. To do this:

  1. Connect your computer or phone to the router via cable (via port LAN) or through an already saved Wi-Fi network (if the device was connected previously).
  2. Open any browser and enter one of the IP addresses in the address bar:
    • 192.168.0.1 (the most common for the "Siberian bear")
    • 192.168.1.1
    • 10.0.0.1
  • Enter your administrator username and password. By default, this is often:
    • Login: admin
    • Password: admin or password (indicated on the router sticker next to Admin Password).

    Once logged in, find the Wi-Fi settings section. The path may vary depending on your router model:

    • 🌐 Wireless → Security (or Wireless Network → Security)
    • 📶 Wi-Fi → Basic Settings
    • 🔒 Network → WLAN

    Look for the field Password, Key or PSK passwordThe current network key will be displayed here. If the symbols are hidden by dots, click the 👁️ icon (show password) or check the box. Show Password.

    Check the cable connection (the LAN indicator should be green)

    Try a different browser (Chrome, Firefox, Edge)

    Disable VPN or proxy in your device settings.

    Make sure you enter the IP address without spaces or slashes.

    Clear your browser cache or open the page in incognito mode-->

    3. Use the Siberian Bear mobile app

    The provider offers an official application Siberian Bear for managing router services and settings. It lets you not only find out your Wi-Fi password, but also change it, reboot the router, or check your balance. The app is available for Android And iOS.

    Instructions:

    1. Download the app from App Store or Google Play (Name: Siberian Bear).
    2. Log in using your login and password from personal account on the provider's website (not to be confused with the router login details!).
    3. Go to the section My Services → Internet or Equipment.
    4. Select your router - there will be an item there Wi-Fi settings or Network password.

    ✅ Advantages of the method: There's no need to connect to the router via cable or remember your IP address. The downside is that you need access to your personal account (if you haven't registered, you'll have to reset your password on the provider's website).

    ⚠️ Attention: If the app doesn't have a Wi-Fi settings section, your router model doesn't support remote management. In this case, use the other methods in this article.

    4. View saved passwords on connected devices

    If your phone, laptop or tablet has already connected to the network Siberian Bear, the password can be extracted from saved data. Let's look at how to do this on different devices.

    On Windows 10/11

    1. Click Win + R, enter ncpa.cpl and press Enter.
    2. Find your wireless connection, right click on it and select Status → Wireless Network Properties.
    3. Go to the tab Security and check the box Show entered characters.

    On macOS

    1. Open Programs → Utilities → Keychain.
    2. Enter the name of your Wi-Fi network in the search.
    3. Double-click on the entry and check the box. Show password and enter your Mac password.

    On Android

    On most smartphones, you can only view your password with root rights or through ADBHowever, some manufacturers (for example, Xiaomi, Samsung) allow you to do this through the settings:

    1. Go to Settings → Wi-Fi.
    2. Click on your network and select Share or QR code.
    3. The system will request a PIN code or fingerprint; after confirmation, it will display the password.

    📱 Note: on iPhone It is impossible to extract the password without jailbreaking—Apple does not provide such a function in iOS.

    What should I do if my device doesn't show the password?

    If the password field in the network properties on Windows is empty, try:

    1. Disconnect and reconnect to Wi-Fi.

    2. Use the command in PowerShell:

    netsh wlan show profile name="NETWORK_NAME" key=clear

    (replace "NETWORK_NAME" with your SSID).

    3. Check if your network settings were reset after updating Windows.

    5. Resetting the router to factory settings is a last resort

    If none of the previous methods worked, the only thing left is reset the router to factory settingsThis will return the default password (indicated on the sticker) and network name, but All personal settings (including port forwarding, parental controls, and guest network) will be deleted..

    Instructions:

    1. Find the small button on the back of the router. Reset (usually recessed into the body).
    2. Take a paper clip or a toothpick and press and hold the button 10-15 secondsuntil the indicators start flashing.
    3. Release the button and wait for the reboot (1-2 minutes).

    After reset:

    • 🔄 Connect to Wi-Fi using the data from the sticker.
    • 🔧 Go to your router settings (follow the instructions in Section 2) and set up your Internet connection again (you may need to enter your ISP login/password).
    • 🔐 Change your Wi-Fi password to a more secure one (read how to do this in the next section).
    ⚠️ Attention: If the router is rented from a provider, resetting it may block internet access. In this case, contact support after the reset. Siberian Bear To reactivate the equipment, please contact us. The phone number is listed in your contract or on the provider's website.

    6. How to change your Wi-Fi password to a more secure one

    If you have managed to restore network access, we recommend change your password immediately to a safer one. Standard combinations like 12345678 or password They can be hacked in minutes. Follow these rules:

    • 🔐 Password length: at least 12 characters (optimally - 15–20).
    • 🅰️ Use it uppercase and lowercase letters, numbers and symbols (!@#$%).
    • 🚫 Avoid personal information: dates of birth, names, street names.
    • 📌 Don't use words from the dictionary (e.g. qwerty, iloveyou).

    Examples of strong passwords:

    Password type Example Security level
    Random combination 7h#pK9!mL2$vR4 ⭐⭐⭐⭐⭐
    Phrase with letter replacement K0t_Lub1t_My0d&Vodu ⭐⭐⭐⭐
    Abbreviation + symbols Sib!r_2026#Medved ⭐⭐⭐
    Simple (not recommended!) 12345678 ⭐

    🔧 How to change your password:

    1. Enter the router settings (see Section 2).
    2. Go to Wireless → Security (or similar section).
    3. In the field Password or PSK Enter a new password.
    4. Save settings (Apply or Save) and reconnect all devices.

    Common mistakes and how to avoid them

    When recovering a Wi-Fi password, users often encounter typical problems. Here are the most common ones and their solutions:

    • 🔌 The router does not respond to reset.
      Check that the button Reset pressed long enough (10-15 seconds). If the lights don't flash, try turning off the power for 30 seconds and try again.
    • 🌐 The router settings page does not open.
      Make sure you're connected via cable or to the correct Wi-Fi network. Try a different browser or clear your cache. If the IP address isn't working, check it using the command ipconfig (on Windows) or ifconfig (on macOS/Linux).
    • 📱 The Siberian Bear app does not show the password.
      Update the app to the latest version or reinstall it. If the Wi-Fi settings section is missing, your router model does not support this feature.
    • 🔑 The old password stopped working after the firmware update.
      Some updates reset security settings. In this case, resetting the router will help (see Section 5).

    FAQ: Answers to Frequently Asked Questions

    Is it possible to find out the Wi-Fi password for the Siberian Bear using the contract number?

    No, the Wi-Fi password isn't included in your contract or provider account. It only contains login information for your account or internet connection settings (usernames and passwords for PPPoE). To find your Wi-Fi key, use the methods in this article.

    What should I do if my router is locked after several unsuccessful password attempts?

    Most routers don't block incorrect Wi-Fi password attempts (they may only block when attempting to access the administrator settings). If you lose network access, check:

    • Is the mode not enabled? Hidden network (SSID Hidden).
    • Has the device's MAC address changed (some routers block new MAC addresses).
    • Is it not activated? Parental control or Guest network with restrictions.

    If the router is truly blocked, only a factory reset will help.

    How to connect to the Siberian Bear's Wi-Fi without a password (via WPS)?

    Some routers support the technology WPS (Wi-Fi Protected Setup), which allows you to connect without entering a password. To do this:

    1. Click the button WPS on the back panel of the router (usually marked with the 🔄 icon).
    2. Within 2 minutes, on your device (phone, laptop), select the network and press Connect via WPS.

    ⚠️ Danger of WPS: This method is vulnerable to hacking, so after connecting, we recommend disabling WPS in the router settings (Wireless → WPS → Disable).

    Is it possible to hack the Siberian Bear's Wi-Fi if you forgot the password?

    Technically, hacking is possible with the help of specialized programs (for example, Aircrack-ng), But:

    • This illegally (Article 272 of the Criminal Code of the Russian Federation - unauthorized access to computer information).
    • Modern routers use encryption. WPA2/WPA3, which is difficult to hack without powerful equipment.
    • Your ISP may block your MAC address if you make suspicious connection attempts.

    Use only legal password recovery methods from this article.

    What should I do if the internet doesn't work after resetting my router?

    If the router is rented from a provider, the reset may have deleted the network connection settings. Siberian BearIn this case:

    1. Check if the indicator light is on Internet or DSL on the router.
    2. If the indicator is red or flashing orange, go to the router settings and check the connection parameters (usually PPPoE with login/password from the contract).
    3. If you are unsure about the settings, call your provider's support team - they will configure the router remotely (phone number: 8 800 200-00-15).

    • 📖 Read also

    Why Wi-Fi says "unidentified network": causes and solutions A detailed analysis of the "Unidentified Network" error in Windows. Find out why your computer can't detect your Wi-Fi router. Huawei WiFi 3 Pro: Full Router Setup and Mesh Creation Detailed instructions for setting up the Huawei WiFi 3 Pro. Configuring PPPoE, Wi-Fi, Mesh network, and parental control Local WiFi network: what it is, how it works, and how to set it up Find out what a local WiFi network is, how it differs from the Internet, and how to set it up correctly. How to set up a TP-Link router: a complete guide Step-by-step guide on how to set up a TP-Link router: logging into the control panel, setting up Wi-Fi, changing the password, and Microsoft Wi-Fi: What it is and how to connect Windows to the network A detailed look at Microsoft Wi-Fi Direct technology, hotspot setup, and troubleshooting. Find out How to find out the name of Rostelecom Wi-Fi: all methods Find out how to find your Rostelecom Wi-Fi network name. Instructions for finding the SSID on routers in your dashboard.