A situation where it is necessary restore access Wireless network access issues occur quite frequently. Users forget complex combinations of symbols, change them for security reasons, or simply lose the piece of paper with the notes. The Planeta provider typically provides subscribers with equipment from various vendors, such as Tenda, D-Link or TP-Link, so there is no universal "show password" button.
However, there are several proven methods to bypass this limitation. If at least one device running Windows or Android is already connected to the network, the problem can be solved programmatically. Otherwise, you'll have to resort to physical reset router settings, which will require re-configuring the Internet.
In this article, we'll cover the detailed steps for different scenarios. You'll learn how to extract saved keys from your computer's registry, use the mobile interface, and properly perform Hard ResetIt's important to understand that each method has its own nuances, depending on your router model.
Finding a saved password on a Windows computer
If your laptop or desktop PC is already connected to the Planeta wireless network or has connected to it before, the operating system Windows You could save credentials in your profile. This is the easiest and most secure method, and doesn't require any intervention on the router. You'll need desktop access and administrator rights.
To begin, open the Network Control Panel. Press the key combination Win + R, enter the command ncpa.cpl and press Enter. In the window that opens, find your active wireless connection, right-click it, and select "Status." Then, go to the wireless network properties.
In the new window, find the "Security" tab. This is where the access code you're looking for is hidden. By default, the "Network Security Key" field is filled with dots. To see the characters, check the "Show entered characters" box. The system may ask you to confirm your administrator rights.
⚠️ Important: If the "Security" tab is unavailable or grayed out, it may mean the network profile is corrupted or your account doesn't have sufficient permissions. In corporate networks, access to these settings is often blocked by group policies.
An alternative method for advanced users is to use the command line. This method works even if you're not currently connected to the network, but the profile was previously saved. Open the command line as administrator and enter the following command to list saved profiles:
netsh wlan show profilesFind your network name "Planet" (or whatever name you gave it) in the list and use the following to get the key:
netsh wlan show profile name="Network_Name" key=clearIn the security information block, find the line "Key Content". It will display cleartext passwordThis method is especially useful when the graphical interface does not work correctly.
How to view your password on Android and iOS
Smartphone owners can also find saved data, but the functionality of mobile operating systems varies greatly. On devices with Android Version 10 and above now allow you to view Wi-Fi passwords directly in the settings, often using biometric authentication.
Go to Settings, select "Wi-Fi" or "Connections." Find the network you're connected to, and tap the gear icon or arrow next to its name. If the system allows, you'll see a "Share" button or a QR code. The password is often written in small print beneath the QR code. If there's no text, take a screenshot of the QR code and scan it with any scanner app or Google Lens—the password will be in the link.
The situation with iOS (iPhone, iPad) has changed dramatically with the release of iOS 16. Previously, it was impossible to find the password without jailbreaking, but now this feature is built-in. Go to "Settings" → "Wi-Fi," tap the blue "i" icon next to your active network. Tap the "Password" field, and after confirming with Face ID or Touch ID, the characters will become visible.
- 📱 On Android 9 and below, it is impossible to view the password using standard tools without root access.
- 🔒 On iOS versions prior to version 16, syncing with macOS was required to view keys in Keychain.
- 🔄 If you changed the password on your router, but your phone connects automatically, the old password in your phone settings may not be updated visually, but the connection will still work.
There are dedicated Wi-Fi manager apps that claim to show saved keys. However, most of them require root rights (superuser rights), which may void the device's warranty and disrupt the operation of banking applications.
Login to the Planeta router control panel
If none of your devices remember the password, but you know the login and password for the router's admin panel, you can view or change the wireless network settings through the web interface. The Planeta provider often uses equipment with standard access addresses. Try entering [username] in the browser's address bar. 192.168.0.1 or 192.168.1.1.
Login usually requires entering your username and password. If you haven't changed them, try the default combinations listed on the sticker on the bottom of the device. This is often admin/admin or admin/password. For equipment Tenda the password may be missing (you just need to create a new one when you first log in), and for D-Link An empty password field is often used.
After successfully logging in, locate the section responsible for your wireless network. It may be called "Wireless," "Wi-Fi," "WLAN," or "Wireless Network." Within this section, look for the "Security" or "WLAN Settings" subsection. The current access key will be displayed in the "PSK Password," "WPA Pre-Shared Key," or "Password" field.
What to do if the page 192.168.1.1 does not open?
Make sure your device is connected to the router via cable or Wi-Fi. Check if you're using DHCP to obtain an IP address automatically. If you're using a static IP address, it may not match the router's subnet. Also, try a different browser or incognito mode, as extensions can block access to local addresses.
If the default addresses don't work, your ISP may have changed them for your model. Try finding out the gateway's IP address. On Windows, this can be done via the command line with the command ipconfigFind the line "Default Gateway" - this is the login address.
⚠️ Note: Control panel interfaces are constantly being updated. Menu locations may vary depending on your router's firmware version. Look for sections containing the words "Wireless," "Security," or "Key."
Resetting the router to factory settings
When the Wi-Fi password is lost and the password for the router admin panel is changed and unknown, the only solution is a complete reset of the settings (Hard Reset). This operation will return the device to its out-of-the-box state, restoring the factory Wi-Fi password, which is indicated on the sticker.
To reset the router, locate the small hole on the router's casing, usually labeled "Reset" or "RST." It's often recessed to prevent accidental pressing. You'll need a thin object, such as a straightened paperclip, toothpick, or needle.
The reset procedure is as follows:
- Plug the router into a power outlet and wait until it is fully loaded (the indicators should be on steadily).
- Press the reset button inside the hole and hold it for 10-15 seconds.
- Watch the indicators: they should all blink together or go out, which signals the start of the reboot.
- Release the button and wait 2-3 minutes for the device to restart.
After this procedure, the Wi-Fi network will be named as indicated on the factory sticker (for example, Tenda_XXXX or Planet_XXXX), and will work without a password or with the password printed on the same sticker. However, keep in mind that all your personal settings, including ISP connection parameters (PPPoE, L2TP, VLAN), will be deleted.
☑️ Preparing to reset your router
It's important to understand that your internet connection may not work immediately after the reset. You'll need to re-enter the authorization information provided by your Planeta provider. This information is usually found in your contract or personal account.
Setting up Wi-Fi after a factory reset
After a successful reset and connection to an open network with the factory name, you need to configure the router to work with the internet. Connect to Wi-Fi or use a LAN cable. Open a browser and go to the address indicated on the sticker (often 192.168.0.1 or a domain name like tendawifi.com).
The Quick Setup wizard usually launches automatically. You'll need to select your connection type. For the Planeta provider, a dynamic IP (DHCP) is most often used, but in some regions and homes, authentication may be required via PPPoE or L2TPThe exact connection type is specified in your contract.
If PPPoE is required, enter the username and password provided by your ISP. Don't confuse them with your Wi-Fi or personal account password. Next, the wizard will prompt you to set up your wireless network. Create a new name (SSID) and set a strong password.
| Parameter | Recommended value | Description |
|---|---|---|
| Operating mode (Mode) | 802.11 b/g/n/ac mixed | Ensures compatibility with old and new devices |
| Channel | Auto or 1, 6, 11 | It is better to choose auto or the least loaded channel |
| Channel width | 20/40 MHz | Affects the speed and stability of the connection |
| Encryption | WPA2-PSK (AES) | The most reliable and compatible security standard |
After applying the settings, the router will reboot, and the wireless network will operate with the new parameters. Be sure to write down the new password in a safe place.
Typical problems and solutions
When restoring access, users often encounter technical difficulties. One common issue is the inability to connect to the router even after a reset. Make sure your computer's network adapter settings are set to obtain an IP address automatically (DHCP). The static address may conflict with the router address.
Another common issue is that the Planeta router doesn't distribute internet, even though Wi-Fi is working. This means there's a problem with the WAN port settings. Check if the WAN indicator (usually marked with a letter) is lit. e (or the Earth symbol). If it's off or red, the problem may be with your provider or the physical cable.
If you've changed your password, but some devices are still unable to connect with an "Incorrect Password" error, try "Forget Network" on those devices and reconnect. Old profiles may contain conflicting data.
⚠️ Note: If you still can't connect to the internet after resetting and reconfiguring, please contact your ISP's technical support. Your MAC address may be used for binding, and it may need to be updated in your ISP's system.
It's also worth considering that older router models may have limitations on the number of connected devices or speed. If you have a lot of devices, it might be worth considering upgrading to more modern equipment that supports the standard. Wi-Fi 5 or Wi-Fi 6.
Frequently Asked Questions (FAQ)
Where can I find the factory password if the sticker has worn off?
If the sticker is illegible, try the standard combinations: admin/admin, admin/password, 1234. You can also try finding the exact router model (written on the case) and searching online for documentation for that specific model. Passwords are often standard across the entire line of devices.
Is it possible to find out your neighbors' Wi-Fi password through apps?
There are no legitimate Wi-Fi hacking apps. Apps that reveal "passwords" use databases created by users who voluntarily shared their keys. Brute-force password cracking is virtually impossible with modern WPA2/WPA3 encryption standards.
My Planeta router isn't detecting my ISP's cable. What should I do?
Check the cable's integrity and ensure it's securely inserted into the WAN port (often blue). Try rebooting the router. If the WAN indicator doesn't light, the cable may be damaged or the MAC address may need to be cloned in the router settings.
How often should I change my Wi-Fi password?
For security purposes, it's recommended to change your wireless network password at least every 6-12 months. Also, be sure to change the password if you've stopped letting someone you know into your home or if you suspect someone else has connected to your network.
Does a complex password affect internet speed?
No, password complexity (number of characters, special characters) does not affect data transfer speed. Speed depends on your provider's plan, equipment quality, channel load, and distance from the router. WPA2 encryption adds minimal overhead, unnoticeable to the user.