How to find your Wi-Fi router's IP address: all the methods for PC, phone, and tablet

Your Wi-Fi router's IP address is the key to its settings. Without it, you can't log into the control panel, change the password, set up a guest network, or update the firmware. But how do you find it if you've never recorded this information? In this article, we'll explain. all possible ways — from standard to little-known, which work on any device: from Windows 11 to old Android 5.0.

Many users mistakenly believe that the router's IP address is the same address displayed in the connection properties on the computer. In fact, local IP of the router (aka default gateway) and your device's IP address on the network are different things. The former usually looks like 192.168.0.1, 192.168.1.1 or 10.0.0.1, and the second one could be, for example, 192.168.0.105Let's figure out how to avoid confusing them and where to find the information you need.

If you are in a hurry, take advantage of it. the fast way for your operating system:

1. How to find a router's IP address using the command line (Windows)

The most reliable method for users Windows 7/10/11 — using the command line. It works even if you have the graphical interface disabled or your router isn't assigning DHCP addresses.

Open Command line (click Win + R, enter cmd and press Enter). Then run the command:

ipconfig | findstr "Default Gateway"

As a result, you will see a line like:

Default gateway . . . . . . . . : 192.168.31.1

This is your router's IP address. If the command returns an empty result or multiple addresses, you have multiple active network connections (e.g., Wi-Fi + Ethernet). In this case, use the extended command:

ipconfig /all

Look for the block with the name of your connection (for example, Wireless network or Ethernet adapter) and the line Main gateway in it.

2. Search for IP through Windows “Options” (without commands)

If the command line seems complicated, you can use the graphical interface. Windows 10/11 the path is this:

1. Click Win + Ito open Parameters.
2. Go to Network and Internet → Wi-Fi (or Ethernet, if connected via cable).
3. Click on the name of your network (for example, TP-Link_1234).
4. Scroll down to the block Properties.
5. Find the line IPv4 gateway - this is the router's IP.

IN Windows 7 another way:

1. Open Control Panel → Network and Sharing Center.
2. Click on the active connection (blue link next to Connections).
3. In the status window, click Intelligence....
4. Look for the line IPv4 gateway.

Connect to your router's Wi-Fi or Ethernet cable

Make sure the internet light on your router is green/blue.

Disable your VPN (it may mask local addresses)

Reboot your router if the IP is not detected-->

3. How to find a router's IP address on a Mac (macOS)

On computers Apple The process is even simpler. Open System Preferences (gear icon in the Dock or via  → System Preferences). Next:

1. Go to Net.
2. Select your active connection (Wi-Fi or Ethernet) in the left column.
3. Click the button Additionally... in the lower right corner.
4. Open the tab TCP/IP.
5. The router IP will be indicated in the line Router.

An alternative way is through Terminal (analogous to the command line in Windows). Open it (Programs → Utilities → Terminal) and enter:

netstat -nr | grep default

In the answer, look for the IP after the word default. For example:

default            192.168.88.1        UGSc           50     0     en0

Here 192.168.88.1 — this is the address of your router.

What to do if the router IP starts with 169.254...?

This address means your device hasn't received the correct network settings from the router (DHCP error). This could be due to:

- Router malfunction or overload

- Incorrect network settings on the device

- IP address conflict in the local network

Solution: Restart your router, check your DHCP settings in its control panel, or reset your device's network settings.

4. Finding the router's IP address on an Android smartphone

On phones with Android The path depends on the firmware and shell version (MIUI, One UI, ColorOS, etc.), but the general principle is the same. Let's look at a universal method:

1. Open Settings → Wi-Fi.
2. Tap on the name of your network (for example, KEENETIC-123).
3. Scroll down to the block Additionally or Advanced settings.
4. Search for lines Gateway or Router - this is IP.

If there is no such item, use a third-party application, for example WiFi Analyzer or FingThey show not only the router's IP address, but also all devices connected to the network.

For pure Android (Pixel, Nexus) or Samsung One UI the path may look like this:

• 📱 Settings → Connections → Wi-Fi
• 🔍 Click the gear next to your network
• 📊 Choose Manage network settings → Show advanced settings
• 🌐 The router's IP will be in the line Gateway or Router IP address

5. Finding a router's IP on an iPhone or iPad (iOS)

IN iOS Apple buries network details deeper than other systems, but they're still easy to find. Follow these instructions:

1. Open Settings → Wi-Fi.
2. Tap on the symbol i in the circle next to the name of your network.
3. Scroll down to the block IPv4.
4. The router IP will be indicated in the line Router.

If you have iOS 14 and later, and the line Router Missing - This means your iPhone didn't receive an IP address via DHCP (for example, due to a static IP). In this case:

1. Return to the main Wi-Fi settings.
2. Click Configure IP (at the bottom of the screen).
3. Select Automatically, if there was one standing there Manually.
4. Reconnect to the network - the router's IP should appear.

On iPad With iPadOS The path is identical, since the system is based on the same base as the iPhone.

6. Universal methods (work on any device)

If the above methods did not work or you are using a rare device (eg. Linux, Smart TV or game console), try these options:

Method 1: Look at the IP address on the router's sticker

Most routers have a sticker on the bottom or back panel with technical information. Look for lines like:

• 🏷️ Default IP Address
• 🏷️ Router IP
• 🏷️ Login Page

Typical default addresses for popular brands:

If the IP on the sticker does not match (for example, 192.168.0.1 If the address doesn't open, the router has been reconfigured. In this case, use the methods from the previous sections to find the current address.

Method 2: Via the provider's web interface

Some internet service providers (eg. Rostelecom, Beeline, MTS) provide access to router settings through your personal account. Go to the provider's website and find the section My devices or Router management — there may be a direct link to the admin panel with the correct IP.

Method 3: Using specialized utilities

Programs like Advanced IP Scanner, Angry IP Scanner or LANScan Scan the local network and display all active devices, including the router. After scanning, look for a device with the manufacturer's name in the results (e.g., TP-LINK, ASUS) - its IP will be the router address.

For Linux (Ubuntu, Debian, Mint) use the command:

ip route | grep default

Or:

route -n

In the response, look for a line with UG in the column Flags - this is the default gateway.

7. Common problems and their solutions

Sometimes it's impossible to determine a router's IP address using standard methods. Let's look at typical situations and what to do:

Problem 1: Commands return IP 169.254.xx

This emergency address, which Windows assigns if it can't get settings from the router. Reasons:

• ⚡ The router is turned off or faulty (check the power and indicators).
• 🔌 The network cable is damaged (if connected via Ethernet).
• 🔄 The DHCP server is disabled in the router settings.
• 🛡️ A firewall or antivirus is blocking network requests.

Solution:

1. Reboot your router (unplug it from the power outlet for 30 seconds).
2. Check the physical connection of the cables.
3. Temporarily disable your antivirus and firewall.
4. Configure IP manually (eg. 192.168.1.100 with a mask 255.255.255.0 and a gateway 192.168.1.1).

Problem 2: Router IP changes after reboot

If the gateway address is constantly different (for example, then 192.168.0.1, That 192.168.100.1), Means:

• 🔄 The router is in the "Secure Mode" mode. DHCP Relay or IP Passthrough.
• 📡 You have double NAT (the router is connected to another router).
• 🔧 The provider uses dynamic routing (most often business tariffs).

Solution:

1. Connect to the router via MAC address (some models, for example Keenetic, support access via http://keenetic.net).
2. Check your settings WAN in the router panel - perhaps the bridge mode is enabled there (Bridge).
3. Contact your provider and check if they are blocking access to equipment settings.

Problem 3: The router login page does not open.

If you've found an IP address, but your browser returns an error when you navigate to it, check:

• 🌐 Correct address entry (without http:// or with him).
• 🔒 Proxy server settings (must be disabled).
• 🔄 Browser cache (try Incognito mode or another browser).
• 🛡️ Firewall or parental controls on the router.

Solution:

1. Try a different browser (for example, Firefox or Edge).
2. Disable VPN and proxy.
3. Reset the router to factory settings (button Reset for 10 seconds).
4. Check if your antivirus is blocking access to local IP addresses (add the address to the exceptions).

8. Additional tips and cautions

When working with router IP addresses, it's important to remember a few things to avoid problems:

⚠️ Attention: Never change the router's IP address to an address from the range 169.254.0.0/16 (For example, 169.254.1.1). This is a reserve range for emergency situations, and its use may lead to network conflicts.

If you are planning change the router's IP (for example, with 192.168.0.1 on 192.168.5.1), please take into account:

• 🔧 All devices on the network must be reconfigured (or receive a new IP via DHCP).
• 📡 Some applications (eg. DLNA, UPnP) may stop working.
• 🔒 If you have static IP from the provider, changing the local address of the router will not affect the external IP.

For advanced users:

• 🛠️ The router's IP can be found in ARP cache devices (command arp -a in Windows/Linux).
• 📡 In networks with VLAN or double NAT traffic analysis may be required through Wireshark.
• 🔧 On some routers (for example, MikroTik) IP can only be changed through WinBox or SSH.

⚠️ Attention: If you're connected to a corporate or public network (hotel, office, university), your attempt to obtain the router's IP address may be blocked by the administrator. In such cases, access to the equipment's settings is usually denied.

Finally, if you do you change routers often? or setting up networks, save this table of standard IPs for easy access:

FAQ: Frequently asked questions about router IP addresses

Is it possible to find out the router's IP address if I'm not connected to its network?

No, unless you're connected to the router's Wi-Fi or Ethernet port, it's impossible to determine its local IP. However, you can:

• Look at the IP address on the router sticker (if it hasn’t been changed).
• Connect to the network and use the methods in this article.
• Reset the router to factory settings (then its IP will become default).

If the router belongs to your provider, you can find out its IP address from technical support.

Why is my router IP 192.168.100.1 and not 192.168.1.1?

This is normal - some providers (eg. Rostelecom or Dom.ru) use non-standard IP ranges for their routers. This address may also be used by:

• Optical routers (GPON).
• Devices in bridge mode (Bridge).
• Corporate networks with multiple VLANs.

If this IP works and opens the control panel, there is nothing to worry about.

How to change the router IP to another?

To change your IP, go to your router's control panel (using your current IP), then:

1. Find the section Local area network (LAN).
2. Change the value in the field IP address (for example, with 192.168.1.1 on 192.168.2.1).
3. Save your settings and reconnect to the network.

⚠️ After changing the IP, all devices on the network will temporarily lose connection until they receive the new settings via DHCP.

Can the router's IP be the same as my computer's IP?

No, this is impossible. The router's IP (gateway) and the IP of your device on the local network are always different. For example:

• Router IP: 192.168.1.1
• Computer IP: 192.168.1.100

If they match, it's a configuration error (IP conflict), due to which the network will not work.

What should I do if I forgot my router's IP address and can't connect to it?

There are several ways to restore access:

1. Reset your router to factory settings (button Reset for 10-15 seconds). After this, its IP will become standard (see table above).
2. Use a domain name (if supported): for example, tplinkwifi.net For TP-Link or my.keenetic.net For Keenetic.
3. Connect via cable and use ipconfig (Windows) or ifconfig (Mac/Linux) to find the gateway.
4. Contact your providerIf the router is rented, they will provide up-to-date data.