How to watch movies from your Honor 9X phone on your TV via Wi-Fi: all the working methods

Streaming movies from Honor 9X Connecting to a big-screen TV via Wi-Fi seems like a simple task—until you encounter connection errors, lag, or no sound. The problem is that smartphone and TV manufacturers use different wireless transmission protocols, and default settings rarely provide a stable connection. For example, Miracast may not work on older TV models, but DLNA often "loses" files with rare codecs.

In this article we will look at all current methods video transmissions from Honor 9X on TV - from built-in functions Smart View And Huawei Share to third-party applications like LocalCast or Google HomeWe will pay special attention to Setting up codecs to avoid choppy video and bypassing restrictions on protected files (for example, downloaded from Netflix or Kinopoisk).

Tip: If your TV was released before 2018, first check its compatibility with the protocols in the table below - this will save an hour of pointless connection attempts.

1. Method: Smart View (built-in function of Honor 9X)

Smart View - this is a proprietary technology Huawei for wireless screen sharing that works on Honor 9X "out of the box". It uses the protocol Miracast, so it is compatible with most modern TVs (but not all - see the compatibility table below).

To turn on broadcasting:

1. Swipe down from the top of the screen to open the notification panel.
2. Find the icon "Smart View"** (or "Wireless Projection") and tap on it.
3. Select the name of your TV from the list of available devices. If your TV isn't displayed, check if the TV mode is enabled. Miracast (usually on the menu Network → Screen Mirroring).
4. Confirm the connection on both devices.

⚠️ Attention: Smart View broadcasts full screen smartphone, not just video. This means notifications, calls, and other interface elements will be displayed on the TV. To avoid this, use Do Not Disturb mode or third-party apps (see Section 3).

The TV and Honor 9X are connected to the same Wi-Fi network.

Miracast/Screen Mirroring mode is enabled on the TV.

VPN and power saving modes are disabled on the smartphone

Firmware has been updated on both devices-->

If the image is on TV slows down a bit, try:

• 🔄 Reduce resolution broadcasts: go to Settings → Device → Smart View → Image Quality and select 720p instead of 1080p.
• 📶 Switch to 5 GHz Wi-Fi (if the router is dual-band). This band is less congested and provides lower latency.
• 🔋 Disable background apps on Honor 9X, especially instant messengers and cloud services.

2. Method: DLNA/UPnP for file streaming

DLNA (Digital Living Network Alliance) allows broadcasting specific files (movies, music, photos) from your phone to TV without duplicating the entire screen. Unlike Smart View, there is no delay here, but it requires both devices to support the protocol.

On Honor 9X To do this you need:

1. Install a file manager with DLNA support, for example FX File Explorer or Solid Explorer.
2. Open the folder with the movie, select the file and tap “Send” → “DLNA/UPnP”.
3. Select your TV from the list of devices.

⚠️ Attention: DLNA doesn't work with DRM-protected files (for example, downloaded from Netflix, Okko or IVI). For them, use Google Cast (section 4) or HDMI adapter.

Why can't the TV see the phone via DLNA?

Most often, the problem lies in the router settings. Check that:

1. Enabled UPnP (in the router control panel, section LAN or Additionally).

2. Disabled AP Isolation (client isolation), if any.

3. The phone and TV are in the same subnet (for example, both have an IP of the type 192.168.1.x).

Advantages of DLNA over Smart View:

• 🎬 No delay — the video plays smoothly even in high resolution.
• 🔋 Less battery consumption on a smartphone (the entire screen is not broadcast).
• 📂 Playlist support — You can send several files to TV at once.

Flaws:

• 🚫 Not all video formats are supported (for example, .mkv with rare codecs it may not be played).
• 🔌 The TV must have a built-in DLNA server (budget models often don’t have one).

3. Method: Streaming apps (LocalCast, AllCast)

If built-in functions Honor 9X If they're not suitable, use third-party apps. They support more formats and allow you to stream. video only (without a smartphone interface) and often have additional quality settings.

Best apps for Honor 9X:

Instructions for LocalCast:

1. Download the app from Google Play and open it.
2. Select a file to play (movie, TV series).
3. Tap the broadcast icon (usually in the upper right corner).
4. Select your TV from the list. If your TV isn't displayed, check if it's turned on. DLNA or Chromecast.
5. Adjust if necessary bitrate (in the menu "Settings → Quality") for smooth playback.

4. Method: Google Cast (Chromecast or built-in TV)

Google Cast — is a technology that allows you to "send" video from your phone to your TV via Wi-Fi without broadcasting the entire screen. It works on devices with Android TV (For example, Sony Bravia, Xiaomi Mi TV) or via a prefix Chromecast.

To take advantage Google Cast:

1. Make sure your TV supports Google Cast (usually this is indicated in the specifications or on the box).
2. Connect Honor 9X and TV to one Wi-Fi network.
3. Open the app you want to stream video from (e.g. YouTube, Kinopoisk, IVI).
4. Tap the cast icon (usually looks like a rectangle with Wi-Fi in the corner) and select your TV.

⚠️ Attention: Not all applications support Google Cast. For example, Netflix And Okko allow you to stream video only on Chromecast, but not for all models Android TVBefore purchasing a movie, check the app to see if it has a casting icon.

If you don't have Android TV, but there is a prefix Chromecast:

• 🔌 Connect Chromecast to the TV's HDMI port.
• 📱 Install on Honor 9X application Google Home.
• 🔍 Follow the in-app instructions to set up your set-top box.
• 🎬 You can now stream videos from supported apps (see the list). Here).

Method 5: Huawei Share (for TVs with HarmonyOS)

Huawei Share (previously Huawei HiShare) is an exclusive technology for devices on HarmonyOS and some TV models Honor/HuaweiIt works faster. Smart View and supports multitasking (You can continue to use your phone during the broadcast).

How to connect:

1. Make sure your TV supports Huawei Share (see the list of compatible models on official website).
2. On Honor 9X swipe down from the top of the screen and hold the icon «Huawei Share» (or "Multiscreen").
3. Turn on Huawei Share on TV (usually in the menu Settings → Connections → Huawei Share).
4. Select your TV from the list of available devices on your phone.

Advantages Huawei Share:

• 🚀 Minimal delay (about 60 ms) - suitable for games and videos.
• 🔄 Gesture support: you can control the TV using your smartphone (for example, swipes to rewind).
• 🔋 Optimized battery consumption compared to Smart View.

⚠️ Attention: Huawei Share works only with TVs Huawei or Honor (series Vision, Smart Screen). For other brands, use Smart View or DLNA.

6. Method: Direct connection via Wi-Fi Direct (without a router)

If you don't have home Wi-Fi or your router is unstable, you can connect Honor 9X and TV directly through Wi-Fi DirectThis method is suitable for watching movies on the go or at the dacha.

Instructions:

1. Turn on the TV Wi-Fi Direct (usually on the menu Network → Wi-Fi Direct). Remember the network name and password (if required).
2. On Honor 9X go to Settings → Wireless & networks → Wi-Fi Direct.
3. Select the name of your TV from the list and enter the password (if requested).
4. After connecting, use Smart View or DLNA for broadcasting (see sections 1 and 2).

⚠️ Attention: When connecting via Wi-Fi Direct:

• 📱 Phone will not have access to the Internet (if not enabled Modem mode on another device).
• 🔋 Battery consumption will increase by 20-30% compared to regular Wi-Fi.
• 🎮 Latency can reach 200–300 ms—not suitable for fast-paced games.

How to enable Wi-Fi Direct on TVs of different brands?

Samsung: Settings → General → Network → Wi-Fi Direct LG: Settings → Network → Wi-Fi Direct Sony: Settings → Network → Wi-Fi Setup → Wi-Fi Direct Xiaomi: Settings → Wireless & networks → Wi-Fi Direct

Comparison of all methods: which one to choose?

The method you choose depends on your TV model, content type, and quality requirements. Below is a comparison table:

Recommendations for selection:

• 🎬 For movies from your phone: use DLNA or LocalCast (best quality).
• 📺 For streaming services: Google Cast or Smart View (if TV supports it).
• 🏡 For Huawei/Honor TVs: Huawei Share (minimal delay).
• 🚗 For travel: Wi-Fi Direct + Smart View.

Common problems and solutions

Even with proper setup, errors can still occur. Here are the most common ones and how to fix them:

Problem 1: The TV doesn't see it Honor 9X in the list of devices.

• 🔄 Restart both devices.
• 📶 Check that they are connected to the same Wi-Fi network. (even if used Wi-Fi Direct, sometimes a preliminary connection to the router is required).
• 🔧 Update the firmware on the phone and TV (in the menu Settings → Software Update).
• 🛡️ Disable VPN and firewall on a smartphone - they can block the broadcast.

Problem 2: The video is slow or choppy.

• 📉 Reduce the resolution broadcasts in the application settings (for example, in LocalCast select 720p instead of 1080p).
• 🔌 Switch to 5 GHz Wi-Fi (if the router is dual-band).
• 📱 Close background applications on Honor 9X, especially instant messengers and cloud services.
• 🔄 Try a different protocol (for example, if Smart View lags, use DLNA).

Problem 3: There is no sound during broadcast.

• 🔊 Check the volume on the TV and phone (sometimes the sound comes through the smartphone speaker by default).
• 🔧 Change the audio format in the application settings (for example, in VLC select PCM instead of DTS).
• 📱 Turn off your Bluetooth headphones on the phone - they can intercept sound.

Problem 4: The application says "Device not supported".

• 📺 Check compatibility your TV with the protocol (see the table at the beginning of the article).
• 🔄 Update your TV's firmware — sometimes manufacturers add support for new standards.
• 🛠️ Use an adapter (For example, Chromecast or Mi TV Stick), if the TV is too old.

FAQ: Answers to frequently asked questions

Is it possible to stream movies from Netflix or Okko with Honor 9X on TV?

Yes, but only through Google Cast (if TV supports Chromecast or Android TV) or Smart View (if the app allows screen sharing). In this case:

• 🎬 Netflix And Okko block screen recording, so Smart View may show a black screen.
• 🔍 Check if the app has a casting icon (a rectangle with Wi-Fi in the corner).

If nothing works, use HDMI adapter or a smart set-top box (Apple TV, Nvidia Shield).

Why are video and audio out of sync when streaming via Smart View?

This is a problem Miracast, especially on budget TVs. Solutions:

• 🔄 Reduce the resolution broadcasts before 720p.
• 📶 Switch to 5 GHz Wi-Fi (if the router supports it).
• 🎵 Manually synchronize the sound in the TV settings (menu Sound → Lip/Sound Sync).
• 🛠️ Use DLNA instead of Smart View — there is less delay there.

How to mirror the Honor 9X screen to TV without Wi-Fi?

There are three options:

1. Wi-Fi Direct (See section 6). Works without a router, but with limitations.
2. HDMI adapter (For example, USB-C to HDMI). Requires a wired connection, but provides better quality.
3. MHL adapter (if TV supports MHL). Suitable for older TV models.

⚠️ Attention: Honor 9X does not support MHL, so use only USB-C → HDMI adapters with a chip DisplayPort Alt Mode.

Is it possible to stream games from Honor 9X to TV?

Yes, but with some reservations:

• 🎮 Smart View or Huawei Share suitable for simple games (latency ~100–150 ms).
• 🕹️ For shooters or racing games it is better to use wired connection (HDMI adapter) because the Wi-Fi latency is too high.
• 📱 On Honor 9X turn on performance mode (Settings → Battery → Performance mode) to reduce lags.

For cloud gaming (Xbox Cloud Gaming, GeForce Now) use Google Cast or Chromecast - they are optimized for streaming.

How to improve the quality of streaming from Honor 9X to TV?

If the video is choppy or slow, try:

• 📶 Switch to 5 GHz Wi-Fi (less interference).
• 🔧 Change codec in the application settings (for example, in VLC select H.264 instead of HEVC).
• 📱 Disable power saving on the phone (Settings → Battery → Disable optimization for the streaming app).
• 🔄 Reduce bitrate manually (in LocalCast: Settings → Quality → 8 Mbps).

If the problem is artifacts (green squares, ripples), most likely the TV does not support the video codec. Use BubbleUPnP for on-the-fly transcoding.