How to change the password on an MTS Wi-Fi router: detailed instructions with photos

Forgot your Wi-Fi password or want to update it for security? Change your router password MTS — a simple procedure that takes no more than 5 minutes if you know the right steps. In this article, we'll cover all possible ways to change the password on your provider's equipment, including popular models. ZTE H298N, Huawei HG8245H And Sercomm RV6699It doesn't matter whether your router is connected to the internet via cable or a SIM card—the steps are the same.

Many users encounter difficulties when trying to access the router settings: the address 192.168.1.1 If it doesn't open, then use the standard login. admin It doesn't work. We'll explain in detail how to overcome these issues and successfully update your Wi-Fi password. And if you're worried about making a mistake, there's an FAQ at the end of the article with answers to frequently asked questions and an interactive self-checklist.

1. Preparing to change your password: what you need to know in advance

Before changing your password, make sure you have:

• 🔌 Stable connection to the router - via cable (recommended) or via Wi-Fi (if you still remember the current password).
• 💻 Device for setup: computer, laptop, tablet or smartphone with a browser (Chrome, Firefox, Safari).
• 📝 Login details for the admin panel: router IP address, username, and password (usually found on a sticker on the back of the device).

If you've never accessed your router's settings, look for the technical information sticker on the router's body. It should include:

• 🔢 IP address (more often 192.168.1.1 or 192.168.0.1).
• 👤 Login (usually admin or user).
• 🔑 Password (may be empty, admin, or unique to your model).
• 📡 Wi-Fi network name (SSID) and the current password (if it has not been changed).

If the sticker is worn off or missing, don't worry - this is standard data for most routers. MTS can be found in the table below. Please note that some new models (e.g. Sercomm RV6699) can use unique combinations that come in an SMS when you first connect.

⚠️ Note: If you previously changed your admin panel login or password and forgot them, you will need to reset the router to factory settings. To do this, press and hold the button Reset (usually located in a small hole) on the back of the device for 10-15 seconds. All settings, including the Wi-Fi password, will be reset!

2. Login to the MTS router control panel

Now let's get practical. Follow the instructions to access your router settings:

1. Connect your device (computer or smartphone) to the router via cable or Wi-Fi.
2. Open any browser and enter the IP address of your router in the address bar (for example, 192.168.1.1). Click Enter.
3. In the authorization window that appears, enter your login and password (see the table above or the sticker on the router).
4. If the data is correct, you will be taken to the control panel.

If the page does not open, check:

• 🔌 Is the cable connected correctly (if you are using a wired connection).
• 🌐 Is the IP address entered correctly (sometimes instead of 192.168.1.1 need to use 192.168.0.1 or 192.168.100.1).
• 🔄 Reboot your router (turn off the power for 30 seconds and turn it on again).
• 🛡️ Disable VPN or proxy in your browser settings.

On some models (eg, Huawei HG8245H) after entering your login and password, an additional window may appear with a choice of mode. Select User Mode (user mode) - this is enough to change the Wi-Fi password. Mode Expert Mode needed only for complex network settings.

3. Step-by-step instructions: how to change your Wi-Fi password

Once you're in the control panel, find the wireless network settings section. The path may vary depending on your router model, but the general idea is the same:

Check your current connection to your router|Write down the new password on paper|Make sure no one is nearby who can see the password|Have a backup device ready to test the connection

-->

Below are instructions for popular router models. MTS:

For ZTE H298N And Sercomm RV6699:

1. Go to the section Network → WLAN → Security.
2. In the field WPA Pre-Shared Key Enter a new password (minimum 8 characters, letters, numbers and symbols are recommended).
3. Click Submit or Apply to save.

For Huawei HG8245H:

1. Select WLAN → Basic Configuration.
2. In the section Security find the field WPA PreSharedKey.
3. Enter your new password and click Apply.

For Eltex NTU-RG-1402G-W:

1. Go to Network → Wi-Fi → Security.
2. In the field Network Key (PSK) Please enter a new password.
3. Save the changes by clicking the button Apply.

Important: After changing the password, all devices previously connected to this network will be automatically disconnected. You will need to re-enter the new password on each device.

4. Requirements for a strong Wi-Fi password

It's not enough to just change your password - it has to be reliableTo protect your network from hacking, follow these recommendations:

• 🔐 Length not less than 12 characters (optimally 16+).
• 🔤 Use it uppercase and lowercase letters, numbers and special characters (!@#$% and others).
• 🚫 Avoid obvious combinations: birth dates, names, dictionary words, sequences (12345678, qwerty).
• 🔄 Change your password once every 3–6 months, especially if guests have connected to your network.

Examples unreliable passwords:

• mts2026 - too short and predictable.
• ivanov1985 — contains personal data.
• password — a word from the dictionary.

Examples reliable passwords:

• kL9#pR2!xQ4@mN7* - long, with different registers and symbols.
• WiFi-MTS-2026-Secure! - easy to remember, but difficult to guess.
• 7h#kLm2!Pq9@Wx4* - a chaotic combination.

How to create a memorable yet complex password?

Use the first letter of each word from your favorite quote or song, adding numbers and symbols. For example, the phrase "My Phone Is Broken, But I'm Happy!" becomes MTS-NYAS!2026Or take two random words and connect them with a symbol: Coffee#Umbrella777.

⚠️ Important: Don't store your Wi-Fi password in plain text on your computer or in cloud services. If you have trouble remembering a complex combination, write it down on paper and hide it in a safe place (for example, a drawer). Never send your password via SMS or instant messaging!

5. Common mistakes and their solutions

Even when following the instructions, users sometimes encounter problems. Let's look at the most common ones:

If you lose internet access after changing your password, but your Wi-Fi network is still visible, check:

• 🔌 Is the provider's cable connected to the router (if using a wired connection).
• 📡 Are the settings correct? PPPoE or DHCP in the section WAN (if you changed them).
• 🔄 Restart your router and modem (if separate).

If the problem persists, there may be a problem with your provider. Check the service status on the website. MTS or call support at 0890 (free from mobile) MTS).

6. Additional Wi-Fi security settings

In addition to changing your password, we recommend checking other security settings for your network:

• 🔒 Encryption type: use WPA2-PSK or WPA3-PSK (outdated WEP easy to hack).
• 📡 Hiding the network (SSID): disable the option Hide SSID - this does not increase security, but only complicates the connection.
• 👥 MAC address filtering: You can enable it, but it won't protect you from experienced hackers and will create inconvenience when connecting new devices.
• 🔄 Firmware update: Check for new software versions in the section System Tools → Firmware Upgrade.

To change the encryption type:

1. Go to Settings Wi-Fi → Security (or similar section).
2. Find the field Encryption or Security Mode.
3. Select WPA2-PSK (recommended) or WPA3-PSK (if supported).
4. Save the settings.

If your router has this feature guest network, it’s also worth setting up:

• Create a separate network for guests with limited access to local devices.
• Set a simple password (eg. GuestMTS2026) and change it after each visit.
• Limit the speed for the guest network so that it does not load the main channel.

7. Changing your password via the MTS mobile app

If you prefer to control your router from your smartphone, you can use the official app. MTS Connect (available for Android And iOS). This is relevant for routers with remote control support, for example, Sercomm RV6699 or ZTE H368N.

Instructions:

1. Download and install the application MTS Connect from App Store or Google Play.
2. Log in with your phone number MTS.
3. Select your router from the list of devices.
4. Go to the section Wi-Fi or Network settings.
5. Find the option Change password and follow the prompts.

The advantages of this method:

• ✅ No need to remember the router's IP address.
• ✅ You can manage the network remotely (if the function is enabled).
• ✅ Intuitive interface.

Flaws:

• ❌ Not all router models are supported.
• ❌ A stable internet connection is required.

⚠️ Attention: If you have lost access to the application (for example, changed your phone number), restore it through the website MTS Or at a mobile phone store. Without a linked number, you won't be able to manage the router via the mobile app.

8. What to do if nothing helps?

If you've tried all the methods but still can't change your password, follow this algorithm:

1. Reset your router to factory settings:
   • Find the button Reset on the back panel.
   • Press it with a sharp object (paper clip, toothpick) and hold for 10-15 seconds.
   • After rebooting, use the standard login and password (see table above).
2. Check physical connections:
   • Make sure the ISP cable is firmly inserted into the port. WAN (usually highlighted in blue).
   • If you are using a 3G/4G router, check that the SIM card is inserted and that there is network coverage.

Contact MTS support:

• Call the number 0890 (free from mobile) MTS).
• Or write to the chat on the website MTS (section "Support").
• A specialist will help remotely or send a technician if the problem is with the equipment.

If the router is rented from MTS, replacing it will be cheaper than repairing it. Check the terms in your personal account or with the operator.

In rare cases, the problem may be with the router firmware. If the device frequently overheats, reboots spontaneously, or fails to save settings, it may need to be reflashed. It's best to leave this procedure to a service center.

FAQ: Answers to Frequently Asked Questions

Can I change my Wi-Fi password through my MTS account?

No, in your personal account on the website MTS You can manage your plan and payment, but not your router settings. To change your Wi-Fi password, you need to access the router's control panel using the IP address or through the mobile app. MTS Connect (if your model is supported).

I forgot my admin panel password. What should I do?

If the default login and password (see table above) don't work, you'll need to reset the router to factory settings. To do this, press and hold the button Reset on the back panel for 10-15 seconds. After rebooting, use the data from the sticker on the router.

What password should I set that is easy to remember but difficult to crack?

Use a combination of two random words with numbers and symbols, for example: Coffee#Umbrella777 or Summer 2026! MTSMost importantly, avoid using personal information (birthdates, names) or dictionary words. Passwords must be at least 12 characters long.

I lost my internet connection after changing my password. What should I do?

First, reboot your router (unplug it for 30 seconds). If the internet still doesn't appear:

1. Check if the provider's cable is connected to the port. WAN.
2. Go to your router settings and check the parameters. WAN (login and password must be specified MTS, if PPPoE is used).
3. Call support MTS by number 0890 — the problem may be on the provider’s side.

Is it possible to change the Wi-Fi password from your phone without a computer?

Yes, there are two ways:

1. Connect to your router's Wi-Fi (if you remember the current password), open a browser on your phone and enter the router's IP address (e.g. 192.168.1.1). Then follow the standard instructions.
2. Use the mobile app MTS Connect (if your router model is supported).