Changing the password on your home Wi-Fi router is a basic procedure that every owner of a device from ByFly (Beltelecom). This is most often necessary when purchasing a new gadget that can't connect to the network, or to improve the security of home traffic. Routers Huawei, which are the standard for the Belarusian provider's fiber-optic networks, have their own interface specifics that must be taken into account when setting up.
Changing the access key doesn't require in-depth technical knowledge, but it does require attention to detail, as changing the settings will cause all connected devices to lose internet connectivity. You'll have to re-enter the new code on smartphones, laptops, and TVs. In this article, we'll detail the steps for popular terminal models, such as B525, B528 And B628, eliminating common mistakes.
Before beginning the procedure, make sure your device (laptop or phone) is connected to the router. This can be done either wirelessly using the current password, or via a LAN cable, which is more secure. A wired connection ensures you won't lose access to the device's admin panel while changing settings. If you use Wi-Fi to access settings, be prepared for the connection to be disconnected immediately after saving the changes.
Router interfaces may vary depending on the firmware version and the specific model of equipment installed in your home. Beltelecom periodically updates its software, so the menu appearance may change slightly. However, the operating logic and menu structure have remained unchanged for many years. The main thing is to find the correct section for wireless networks and security.
Preparing to change security settings
Before you begin manipulating the web interface, you'll need to do some preparation. First, you'll need access to the router's administrative panel. To do this, you'll need the gateway IP address and login credentials. By default, the equipment Huawei, issued ByFly, the address is most often 192.168.8.1 or 192.168.1.1This information is also indicated on the sticker on the bottom of the device.
Secondly, make sure you have internet access or saved instructions in case something goes wrong. Sometimes, after a reset or an input error, the router may stop responding and require a reboot. Having a LAN cable (twisted pair) handy will make this process much easier, as a wired connection is more stable and won't be interrupted while new security settings are being applied.
It's also important to choose a new password that meets modern security standards. It should be complex enough to resist brute-force attacks, yet memorable. Using simple combinations like "12345678" or your date of birth makes your network vulnerable to unauthorized access, which could lead to personal data theft or the use of your network for illegal activities.
Logging into the Huawei router's web interface
The first step is to log in to the router's management system. Open any browser (Chrome, Opera, Firefox) on a device connected to the network. Enter the router's IP address in the address bar. For most subscribers, ByFly This 192.168.8.1After pressing Enter, a login page will open, where the system will ask for your username and password.
This is where confusion often arises: many users try to enter Wi-Fi credentials, but this is incorrect. You need the login credentials to access settings (Web UI login). Default for equipment Huawei login often looks like this admin, and the password is located on the same sticker under the device's body, usually labeled "Password" or "Web UI Password." If you've previously changed this password and forgotten it, you'll have to perform a full reset using the button. Reset.
⚠️ Attention: If you enter your password incorrectly three times to access the web interface, the system may temporarily block access from your IP address. In this case, wait 5-10 minutes or reboot the router to remove the block.
After successfully entering the data, you'll be taken to the main status page, which displays information about the connection, signal strength, and number of connected users. The interface can be dark or light, but the menu structure is typically located either at the top of the screen or as a sidebar on the left. We need to find the section responsible for wireless network settings.
Find the WLAN and Security Settings section
In the router interface Huawei Wi-Fi settings are usually found in a section called WLAN, Wi-Fi or Wireless network. Depending on the firmware version, this item may be located in the main menu or hidden in the "Settings" submenu (Settings). Look for tabs named "WLAN Basic Settings", "WLAN Security" or simply "Wi-Fi Settings".
Within this section, you'll see several subsections. We're specifically interested in security. Settings are often divided into "Basic" (where you set the SSID) and "Security" (where you set the password and encryption type). Make sure you're in the tab where you can edit the access key. For dual-band routers (supporting 2.4 GHz and 5 GHz), the settings may be separated into different tabs or combined under a single switch.
☑️ Check before changing your password
The important parameter here is SSID (Service Set Identifier) is the visible name of your network, displayed when searching for available connections on your phone. You can change it to any name you like, using Latin characters. This will help you easily identify your network among your neighbors, especially in apartment buildings where the airwaves are saturated with signals.
Below is a table describing the main parameters you will encounter in this section:
| Parameter | Description | Recommended value |
|---|---|---|
| SSID Name | Wireless network name | Any (in Latin) |
| Authentication Mode | Authentication type | WPA2-PSK or WPA3 |
| Encryption Mode | Encryption mode | AES |
| WPA PreSharedKey | Access password | Minimum 8 characters |
Creating a strong password and choosing an encryption type
The most critical step is choosing the encryption type and entering a new password. In the field Authentication Mode (Authentication mode) you need to select the most secure option available. Modern standards offer WPA2-PSK And WPA3If your router and all connected devices support WPA3, choose it—it's the latest security standard. Otherwise, the best choice remains WPA2-PSK.
It is strongly recommended not to choose options WEP or Open (without a password). The WEP protocol was cracked over ten years ago and offers no protection whatsoever. An open network allows anyone to use your internet and intercept the data you transmit, including email and banking passwords, unless the sites use a secure HTTPS connection.
Why can't you use WEP?
The WEP protocol uses static encryption keys, which can be easily recovered with specialized software in a matter of minutes. An attacker can not only steal traffic but also introduce viruses into your local network.
When creating the password itself (WPA PreSharedKey), follow the complexity rule. It should contain at least 8 characters, but 12 or more is better. The ideal formula: uppercase and lowercase letters, numbers, and special characters. Avoid dictionary words and keyboard sequences. Remember: the more complex the password, the more resistant your home network is to hacking.
Save changes and reconnect
After you have entered the new network name (if you changed it) and created a strong password, you need to click the button Save (Save) or Apply (Apply). At this point, the router will reboot the wireless module. If you're connected via Wi-Fi, the internet connection will be immediately lost, and the device will report a connection error or require a new password.
At this point, it's important not to panic. Take your smartphone or laptop and open the list of available Wi-Fi networks. Find your network (either by its new name, if you changed it, or by its old one). Tap it and enter the password you just created. Make sure you enter the characters correctly, observing case sensitivity—the system is case-sensitive.
⚠️ Attention: If after entering the correct password the device displays "Unable to connect" or "Authentication error," try temporarily disabling MAC address filtering in the router's security settings if it was previously enabled.
After a successful connection, test your internet connection by opening any website. If the pages load, the process was successful. Now you need to follow the same connection procedure on all other devices in your home: tablets, smart TVs, game consoles, and computers. Old saved network profiles will no longer be valid on them.
Troubleshooting Huawei setup issues
Users may encounter various difficulties during setup. One common issue is that the browser won't open the router settings page. Make sure you're entering the address correctly, without unnecessary characters like "www" or "http." Also, make sure your network adapter is set to obtain an IP address automatically (DHCP); otherwise, your computer won't see the gateway.
Another common issue is that the password field doesn't accept characters or the "Save" button is grayed out. This could be a browser issue. Try using incognito mode or a different browser. Sometimes cached data from the old interface conflicts with new scripts. Clearing the browser cache often resolves the issue.
If the router Huawei If your Wi-Fi connection stopped working after changing the settings, you may have accidentally disabled the radio module. There should be a checkbox labeled "Enable WLAN" or "Turn on Wi-Fi" in the interface. Check its status. Also, make sure you haven't changed the wireless network channel to one occupied by your neighbors, although modern routers usually select a channel automatically.
What should you do if you forgot your new password?
The only way to regain access is to perform a hard reset. Find the small reset hole on the router's case and press it with a paperclip for 10-15 seconds while the router is turned on. The device will return to factory settings, and the password will be the same as on the sticker.
Additional measures to protect your home network
Changing your password is just the first step. For maximum security, experts also recommend changing the password for the router's web interface (the one you used at the beginning of the instructions). By default, it's often set to the default, and an attacker with access to your Wi-Fi network can easily access and change the settings.
Also worth paying attention to is the function WPSThis is a simplified connection technology that allows you to connect to a router with the press of a button. However, from a security standpoint, WPS is considered a vulnerable protocol. In the settings Huawei (WLAN -> WPS section) it is recommended to set the status to "Disable" to prevent the possibility of guessing the PIN code.
Regularly check the list of connected clients in the web interface. If you see unfamiliar devices, change the password immediately and check who has physical access to your router. Remember that security is a process, not a one-time action. Update your router firmware if your provider offers this option through your personal account or automatic notifications.
Is it possible to change the password through the app?
Some router models Huawei support control via a mobile application Huawei AI Life or Huawei HiLinkIf your model is supported, you can download the app, link the router, and change Wi-Fi settings directly from your phone without accessing the browser. However, for hardware ByFly This feature may be limited by your provider.
Does changing your password affect your internet speed?
No, changing your password does not affect the speed. However, if you change the encryption type from WEP on WPA2/WPA3, the speed may even increase due to more efficient channel utilization, or the connection stability may improve. Old protocols created unnecessary load and interference.
What should I do if the password sticker has worn off?
If the sticker on the bottom of the router is illegible and you have not changed the factory password for entering the settings, try the standard combinations: login admin and password admin, or login admin and an empty password field. If that doesn't work, the only solution is a hard reset using the button. Reset, after which the router will create new random keys, which can be seen in the settings immediately after the first connection.