Changing the password on a Wi-Fi router is a basic network security procedure that every home internet owner should be able to perform. With the Akado provider (part of the Rostelecom group of companies), this procedure has its own nuances, depending on the model of equipment installed in your apartment or office. Most often, subscribers are provided with devices of the brand Technotronic, Eltex or Sagemcom, the interfaces of which may differ visually, but the logic of actions remains similar.
There are various reasons why you might need to change your access key: you suspect your neighbors are using your data, you've forgotten your current password, or you simply want to strengthen your home network's security against unauthorized access. Ignoring this procedure can lead to reduced internet speeds and potential leakage of personal data transmitted over your network. In this article, we'll cover the process of logging into the control panel and setting up a wireless connection in detail.
Preparing for setup and checking the connection
Before making any changes to your router's configuration, you need to ensure the physical connection is stable. The best way to make these adjustments is to connect your computer or laptop to the router via Ethernet cable, as changing Wi-Fi settings may temporarily interrupt your wireless connection. If this isn't possible, make sure your mobile device or laptop is connected to the current Wi-Fi network, even if the internet connection is temporarily down.
You'll also need to locate the sticker on the bottom of the router. This is where critical information is found: the web interface login address (often an IP address or domain name), as well as the factory-set administrator login and password. For Akado equipment, the standard address is often 192.168.0.1 or 192.168.100.1, however, depending on the model, this data may vary, so checking the sticker is mandatory.
If the default login credentials were changed previously and you don't remember them, you'll need to perform a full factory reset (hard reset) of the router. To do this, locate the recessed button on the powered-on device. Reset or WPS/Reset, press it with a paperclip for 10-15 seconds until the indicators blink, and then release. After rebooting, the router will return to the factory settings indicated on the sticker.
⚠️ Attention: A hard reset will delete not only your Wi-Fi password but also all connection settings for your ISP. If your router requires specific PPPoE or VLAN settings for Akado to work, make sure you know these details or contact technical support before performing the reset.
Login to the router control panel
The authorization process begins by launching any web browser on the connected device. In the address bar, where you typically type the website address, you must enter the router's IP address. For most models used by your provider, this is 192.168.0.1After entering the address, press the key EnterIf the address is correct, the system will request a login and password to access the management system.
In the authorization window that opens, enter the information found on the device sticker. The default login is usually admin, and the password can also be admin or a unique character set specified by the manufacturer. Please be careful when entering: the system is case-sensitive, so Caps Lock It's better to disable it temporarily.
If the page doesn't load, check your computer's network adapter settings. The device's IP address must be in the same subnet as the router. For example, if the router's address 192.168.0.1, then your computer's address should be like this 192.168.0.X, where X is a number from 2 to 254. In modern systems, these parameters are usually obtained automatically via the protocol DHCP.
What should I do if the page doesn't open?
If your browser says "Unable to access the site," try clearing your browser's cache or opening Incognito mode. Also, make sure your antivirus or firewall isn't blocking access to local URLs. Sometimes switching browsers (for example, from Chrome to Firefox) can help.
Find the wireless network section in the interface
Akado router interfaces can vary significantly depending on the year and model of the device. However, the menu structure generally follows a common pattern. You need to find the section responsible for wireless connections. Look for tabs with the following names: Wireless, Wi-Fi, Wireless network or WLAN.
Within this section there are often subsections such as "Basic Settings" (Basic Settings) and "Security" (Security). It is in the security tab that the field for changing the password is located. In some firmware versions, for example, on devices Technotronic TN-RG02G, this parameter can be called Pre-Shared Key or "WPA Key".
Here, we also recommend checking the encryption type. For maximum protection and compatibility with all modern devices (smartphones, laptops, smart speakers), you should select the mode WPA2-PSK or WPA3. Outdated encryption standards such as WEP or WPA (without the number 2), it is not recommended to use, as they are easily hacked and may not be supported by new gadgets.
Instructions for changing your password and network name
The actual change of the access key occurs in a field that may be called WPA Passphrase, Wireless Password or simply "Password." Delete the old value and enter a new code of your own creation. It is recommended to use a combination of upper- and lower-case letters, numbers, and special characters, at least 8-10 characters long.
Along with the password, the network name is often changed (SSID). This field is located in the adjacent tab of the main wireless network settings. Changing the name will help you easily identify your network in the list of available connections, especially if you live in an apartment building with dozens of neighboring routers.
After entering all the required data, be sure to find and click the button Save, Apply or ApplyOn some Akado router models, changes take effect immediately, while on others, a device reboot may be required. If the router reboots automatically, wait 1-2 minutes for all services to fully launch.
☑️ Password Change Checklist
It's important to understand that when you save the settings, all devices connected via Wi-Fi will immediately lose connection to the router. This is normal system behavior. You'll need to re-find your network (using the new name, if you changed it) and enter the new password on each device: phone, tablet, and TV.
Table of standard parameters for different models
Since Akado uses a variety of equipment from various vendors, a summary table of the most common factory login credentials is provided below. This will help you identify the correct manufacturer's credentials if the label on the device is damaged or worn off.
| Router model | IP address | Login | Password |
|---|---|---|---|
| Technotronic TN-RG02G | 192.168.0.1 | admin | admin |
| Eltex NTU-2 | 192.168.100.1 | admin | admin |
| Sagemcom F@st 2804 | 192.168.1.1 | admin | admin |
| D-Link DIR-300 | 192.168.0.1 | admin | (empty field) |
| Upvel UR-3216BN | 192.168.10.1 | admin | admin |
The data in the table is valid for factory settings. If you or the technician previously changed the control panel password (not to be confused with the Wi-Fi password), the data in the table will not work. In this case, a full reset using the button will help. Reset.
⚠️ Attention: Provider equipment interfaces can be updated remotely. If you see an interface different from what you expect, look for the manufacturer's logo or the "Advanced Settings" section for more options.
New password strength requirements
Creating a strong password isn't just a formality, but a necessary security measure. Many users make the mistake of using simple combinations like 12345678, password or your phone number. These keys are generated by specialized programs in a matter of seconds.
A good password should contain at least 12 characters. Use mnemonic devices to remember it: take the first letter of each word from a favorite song or phrase and add numbers and symbols. For example, the phrase "I like to walk in the park twice a week!" could become a key. Ylgvp2rvn!.
Avoid using personal information, such as birthdates, pet names, or animal nicknames, that may be known to others or easily guessed on social media. It's also not recommended to use words from a dictionary without distortion, as there is a dictionary attack method that automatically checks thousands of words.
Common errors and problems when setting up
One common problem is when the device displays "Incorrect Password" even though you're entering it correctly. This is often caused by an incorrect keyboard layout or accidentally turning on Caps LockCheck the language currently active on your system and try entering the password in a text editor to visually verify the characters are correct, then copy it.
Another issue is the inability to connect to the network after changing settings. The device may "remember" the old network profile. In this case, find your network in the Wi-Fi list on your smartphone or laptop and select "Forget network" (Forget Network) and reconnect by entering new data.
Sometimes users confuse the Wi-Fi password (wireless network key) and the administrator password (used to access settings). If you've changed the administrator password and forgotten it, it's impossible to restore access without a factory reset. Please be careful when changing these settings.
What should I do if my Akado router doesn't save settings?
If the settings are reset after clicking "Save" or the router reboots to its default state, the device firmware may be corrupted or the log file may be full. Try rebooting via "System Tools" -> "Reboot." If the problem persists, you may need to reflash the device via TFTP, but it's best to leave this procedure to technical support.
Is it possible to change the password via the mobile app?
An official, unified Akado Mobile app for deep router configuration (like changing the Wi-Fi password) typically doesn't exist for all models. Some modern routers support management via universal manufacturer apps (such as Tenda Wi-Fi or TP-Link Tether), but for standard ISP devices, the web interface via a browser remains the primary and most reliable management method.
How often should I change my Wi-Fi password?
Cybersecurity experts recommend changing your home Wi-Fi password every three to six months, especially if you frequently have guests or suspect a key leak. However, if you use a very complex password and haven't shared it with anyone, frequent changes aren't strictly necessary, but they are a good preventative measure.
Does changing your password affect your internet speed?
Changing the password itself doesn't affect speed. However, if you change the encryption type from WPA2 to the outdated WEP or vice versa to an algorithm that's very CPU-intensive (on very old models), speed may change. The default WPA2-PSK (AES) option is the optimal balance of security and speed for Akado equipment.