Changing the default wireless network ID isn't just a matter of aesthetics, but a fundamental step toward improving the security and usability of your home internet. When you first receive your equipment from your provider, it usually has a factory name containing the device model and a series of random characters, making it difficult to find the desired connection in the list of available networks, especially in multi-family buildings.
Procedure for changing parameters SSID (Service Set Identifier) is performed through the router's web interface and doesn't require any technical knowledge or additional software installation. The process takes only a few minutes, but requires attention, as once the new settings are applied, all your devices will lose connection to the router until you re-authorize under the new name.
In this guide, we will go through the process of renaming a network in detail for the most popular equipment models used by the provider, including devices Sercomm And HuaweiYou'll learn how to properly separate frequency bands, choose a secure password, and avoid common mistakes that could lead to loss of access to your account or router settings.
Preparing to change router settings
Before making any changes to your hardware configuration, ensure a stable connection between your computer or smartphone and the router. It's best to configure the router via a wired connection. Ethernet, as this will eliminate the risk of connection loss while applying new wireless network settings. If this isn't possible, make sure your device is connected to your current Wi-Fi network and the signal is stable enough.
You will also need login information for your router's control panel. The standard login address usually looks like this: 192.168.1.1 or 192.168.0.1, and the default login and password are usually indicated on a sticker located on the bottom of the device. For MGTS equipment, the following credentials are often used: admin / admin or admin / 1234, however, they may differ depending on the model.
It's important to come up with a new network name in advance that's easily identifiable but doesn't contain personal information like your apartment number, last name, or exact address. Using a depersonalized name increases your digital security, making you a less visible target to potential attackers scanning the airwaves in your area.
☑️ Preparing for setup
Login to the MGTS equipment web interface
Open any modern browser on a device connected to the router and enter the gateway's IP address in the address bar. After navigating to the address, the system will prompt you for authorization. Enter the username and password found on the device's label. If you've previously changed these details and have forgotten them, you may need to perform a factory reset using the button. Reset on the body.
The interfaces of different MGTS router models may differ significantly visually, but their operating logic remains similar. Sercomm often have a more simplified menu with large icons, while equipment Huawei Provides more detailed settings in a classic style. Navigation is typically via the top or side menu, where you'll find the section responsible for wireless connections.
⚠️ Note: If you change settings via Wi-Fi, the connection to the router will be lost when you save the changes. You will need to re-find the network with the new name in the list of available connections on your device.
In some cases, your ISP may use custom firmware with limited access to advanced settings. If you can't find the options you need in the standard interface, try going to 192.168.1.1 and select the "Advanced settings" mode or a similar option, if available in your tariff plan.
What should I do if the page doesn't load?
Make sure you're entering the correct IP address. Try using incognito mode in your browser or clearing your cache. Also, check that your computer's network card is set to obtain an IP address automatically (DHCP).
Find the Wireless Network (WLAN) section
After successful authorization, you need to locate the section responsible for wireless module settings. It may have different names in MGTS router interfaces: WLAN, Wi-Fi, Wireless network or WirelessThis item is often located in the main menu or in the "Local Network" subsection.
Modern dual-band routers allow you to configure names for the 2.4 GHz and 5 GHz frequencies separately. This provides flexibility in managing device connections: older devices can remain on the 2.4 GHz frequency, while modern laptops and smartphones can be switched to the faster 5 GHz band. Some firmware versions include a network aggregation feature (Smart Connect), which hides the split and displays a single name for both bands.
Inside the WLAN settings section you will see a field SSID (or SSID Name). This is the field where you should enter the desired name for your network. It is recommended to use Latin letters and numbers, as some older devices may display names incorrectly or fail to connect to networks with Cyrillic characters.
| Parameter | Description | Recommendation |
|---|---|---|
| SSID | Wireless network name | Latin, without special characters |
| Security mode | Data encryption type | WPA2-PSK or WPA3 |
| Password (Pre-shared Key) | Network access key | Minimum 8 characters, numbers + letters |
| Channel width | Bandwidth | 20/40/80 MHz (auto or max) |
Changing the network name and security settings
By entering a new name in the field SSID, pay attention to the surrounding settings. It's crucial not only to rename the network, but also to ensure that a strong encryption method is selected. The optimal choice today is the standard WPA2-PSK (AES) or newer WPA3, if your equipment supports this technology. Avoid using legacy WEP or WPA (TKIP) encryption, as they are easily cracked.
In the password field (often referred to as Pre-shared Key, Wireless Password or Security key) Enter a complex character combination. The password must contain at least 8-10 characters, including uppercase and lowercase letters, as well as numbers. This will protect your network from unauthorized access by neighbors and from the use of your channel for illegal activities.
Some MGTS router models allow you to set up a guest network. This is a separate wireless channel with its own name and password, isolated from your main local network. Using a guest network is a great way to provide internet access without exposing your personal files, printers, and smart devices.
⚠️ Note: Changing your Wi-Fi password will automatically disconnect all connected devices. You will need to re-enter the new password on each smartphone, tablet, and laptop.
After entering all the necessary data, do not forget to click the button Save or Apply (Apply/Save). The interface may prompt you to reboot the device for the changes to take effect. If the router doesn't reboot automatically, force it through the "System Tools" menu or by simply power cycling it.
Setting up dual-band routers (2.4 and 5 GHz)
Owners of modern MGTS tariffs often receive equipment that supports operation in two frequency ranges. 2.4 GHz provides greater coverage and penetrates walls better, but has lower speed and is more noisy from neighboring networks. 5 GHz offers high speed and minimal interference, but its range is shorter.
In your router settings, you may see separate tabs or subsections for each range (for example, WLAN 2.4G And WLAN 5G). You can give them completely different names to clearly identify where you're connecting. For example, add "_5G" to the network name for the high-speed band.
There is a function Smart Connect (or similar), which combines both bands under a single name. The router automatically decides which frequency to connect the device to based on distance and channel congestion. However, experience shows that manually separating the networks often works more reliably, allowing the user to force demanding devices to connect to the 5 GHz band.
If you decide to separate networks, make sure they have the same passwords. This will make life easier if you decide to merge them back together later or if a device loses connection to one of the bands. Write down the new names and passwords in a safe place.
Save settings and reconnect
After clicking the save button, the router will begin applying the changes. Your browser screen may freeze or display a connection error. This is normal as the device restarts the wireless module. Wait about 1-2 minutes for the router to fully boot up.
Now, on your device (smartphone or laptop), go to the list of available Wi-Fi networks. Find the new name you just created. Tap it and enter the new password. If the connection is successful, you'll have internet access.
For other devices in the house (TVs, smart speakers, tablets), the connection process will have to be repeated manually. Devices can't "guess" that a network with a new name is the same router, even if the password remains the same. To them, it's a new access point.
Solution and typical mistakes
Sometimes users encounter a situation where, after changing settings, the device doesn't detect the new network or connect to it. One common cause is the use of prohibited characters in the network name. Although the standard allows for many characters, it's best to limit the network name to Latin letters and numbers to avoid compatibility issues with older devices.
Another problem is a stuck network profile on your smartphone. The device may try to connect to an old network with the same name (if your neighbors have one) or fail to update its security settings. In this case, the "Forget Network" option in your phone's Wi-Fi settings helps, after which you'll need to search for and reconnect.
If you've changed the password but forgotten it, and no devices are connecting, you'll need to reset the router to factory settings. To do this, you'll need to find a small hole. Reset On the case, press it with a paperclip for 10-15 seconds while the power is on. After this, the router will revert to the factory name and password indicated on the sticker, and you'll have to repeat the setup process.
⚠️ Note: Pressing the Reset button deletes all your personal settings, including your ISP's PPPoE login and password, if they were entered into the router. Make sure you know your internet access details, or use automatic configuration via DHCP if your ISP allows it.
In rare cases, the problem may be with the provider or the equipment itself. If your MGTS router is unstable after a reconfiguration, it's a good idea to check for firmware updates in your personal account or through the device interface.
Frequently Asked Questions (FAQ)
Is it possible to use Russian letters in the MGTS Wi-Fi name?
Technically, the standard allows for the use of Cyrillic, but this often leads to problems. Many devices (especially game consoles, smart TVs, and older smartphones) display names as "krakozyabry" or simply refuse to connect. It is recommended to use only the Latin alphabet.
What happens if I forget my new Wi-Fi password?
If no devices are connected to the network, it's impossible to recover the password. You'll have to perform a full reset of the router using the button. Reset to factory settings. After that, the network will have the same name as on the sticker, and the password will also be the default.
Do I need to change the router login password (admin) when changing Wi-Fi?
These are two different things. The Wi-Fi password is needed to connect devices to the internet. The router password (admin) is needed to change settings. For security reasons, it's recommended to change the administrator password as well to prevent neighbors from changing your settings.
Does the length of a network name affect internet speed?
No, the SSID length (up to 32 characters) does not affect data transfer speed or connection stability. However, an excessively long name may be difficult to display on some mobile devices.
How do I hide my Wi-Fi network name?
There's a "Hide SSID" option in your router settings. If enabled, the network won't appear in the general list. To connect, you'll need to manually enter the network name and password on each device. This provides an illusion of security, but doesn't protect against hackers.