The situation when it is necessary to change the access key to a wireless network occurs for users of the provider MGTS Quite often. This may be due to a desire to secure your home network from unauthorized access by outsiders, or simply because you've forgotten your current strong password and can't connect a new device. Wi-Fi routers, provided by the operator, have standard procedures for resetting and changing settings that do not require in-depth knowledge of network technologies.
In most cases, subscribers use equipment of the brand Eltex or Huawei, which is set by specialists when connecting to the plan. Regardless of the terminal model, the process of recovering or changing the password is based on logging into the device's administrative control panel. It is important to understand that changing the wireless network settings will interrupt the connection on all connected devices, so password reset requires subsequent reconnection of each device with a new key.
Before taking any action, make sure you have physical access to the router and, preferably, a computer or laptop connected via cable. While you can change the settings via Wi-Fi, if you make a mistake, you risk losing access to the control panel if the new network name or key is entered incorrectly. Let's take a detailed look at how to perform this procedure as safely and effectively as possible for your home network.
Preparing to change wireless network settings
The first step before accessing your router settings is to ensure a stable connection between your computer and your ISP's terminal. The most reliable method is to connect via LAN cable, which is usually included with the equipment. If this isn't possible, make sure your device is connected to a current MGTS Wi-Fi network, even if the internet is temporarily down.
You will also need to know the address to access the web interface. MGTS equipment most often uses a standard IP address. 192.168.1.1 or domain name 192.168.100.1This information is often found on a sticker located on the bottom of the router. You can also find the factory-set login and password for logging into the management system there if you've never changed them.
⚠️ Note: If you previously changed your router's password and forgot it, the standard procedure for changing the Wi-Fi password through the web interface will be unavailable. In this case, you will need to perform a full reset of the device to factory settings.
Open any browser on your computer and enter the gateway address in the address bar. Don't use the search bar, specifically the address bar where the website name is usually written. If the page doesn't load, check your network card settings: Obtain an IP address should be set to automatic acquisition (DHCP).
Login to the MGTS router control panel
After entering the correct IP address, the system will request authorization. For equipment Eltex, which is being installed en masse in Moscow, the standard credentials are often login admin and password admin or 1234In some firmware versions, the password may be unique for each device and located on a sticker.
If you use terminals HuaweiThe procedure is similar, but the interface may differ visually. The key here is to enter the data correctly. The system won't prompt you if you mix up the capitalization, so check your input carefully. After successful login, the main status page will open, displaying information about the GPON connection and network status.
In some cases, providers set individual passwords for accessing settings. If the standard combinations don't work, try finding the information in your contract or on your subscriber information card. Authorization - this is a critical stage, without which further manipulations are impossible.
Changing the Wi-Fi password on Eltex routers
Equipment Eltex is the most common among MGTS subscribers. The interface of these devices is quite logical, although it looks austere. After logging in, you need to find the section responsible for wireless connections. It's usually called WLAN or Wireless network in the top or side menu.
Look for the subsection within the section Security (Security) or BasicThis is where the fields for changing the network name (SSID) and access key are located. The field where you need to enter the new password may be called WPA Pre-Shared Key, Passphrase or simply Password. Make sure the encryption method is set to WPA2-PSK or WPA3 for maximum protection.
☑️ Check before saving
After entering a new combination of characters, be sure to press the button Apply or SaveThe router may warn you that the connection will be terminated. This is a normal system response to changes in security settings. The new settings take effect almost immediately.
Setting up a wireless network on Huawei equipment
If your home is served by an optical terminal Huawei, the process of changing the access key will have its own peculiarities. After logging into the web interface, go to the tab WLANIn the menu on the left, select WLAN Basic Configuration or Basic WLAN settings.
Here you'll see a list of available networks (usually there are two: 2.4 GHz and 5 GHz). Select the one you're using, or change the settings for both at once. In the WPA Pre-Shared Key Enter a new password. Note the check mark. Hide SSID - If you activate it, the network will become hidden and will not appear in the list of available networks on phones, which is an additional security measure, but will make it more difficult for guests to connect.
Don't forget to save the changes with the button Apply. Interfaces Huawei Sometimes a device reboot is required for the new settings to fully apply, although most often the network simply restarts. Check the Wi-Fi indicator on the router: it should be lit or flashing, indicating that the module is active.
| Parameter | Default value | Recommended value | Description |
|---|---|---|---|
| SSID Name | MGTS_XXXX | Unique name | Your network name |
| Security Mode | WPA2-PSK | WPA2/WPA3 | Encryption type |
| Encryption | AES | AES | Encryption algorithm |
| Channel Width | Auto | 20/40/80 MHz | Channel width |
Full reset of the router to factory settings
If you don’t remember the password to enter the router settings or the previous owners of the apartment changed them, the only way out is a hard reset (Hard Reset). This operation will return the device to its out-of-the-box state, deleting all user settings, including the PPPoE login and provider password.
To perform a reset, find a small hole with the inscription on the router body Reset or RSTIt may be recessed into the housing to prevent accidental pressing. You'll need a thin object, such as a straightened paperclip or toothpick.
⚠️ Please note: After a full reset, your router will no longer be able to connect to the internet, as your MGTS authorization settings will be deleted. You will need to re-enter your contract information (PPPoE login and password) or call a service technician.
Press the button inside the hole Reset and hold it for about 10-15 seconds while the router is plugged in. The lights on the front panel should blink or go out, indicating the recovery process has begun. After this, the device will reboot, and you can log in using the credentials from the sticker on the bottom.
Common problems and solutions
Users may encounter various difficulties when changing their password. One of the most common is when the device fails to connect to the network with the new password. In this case, find your network in the list of available networks on your smartphone or laptop, select "Forget Network" or "Delete," and then try connecting again using the current password.
Another problem could be a weak signal after a reset. Sometimes the router automatically selects a noisy channel. You can try changing the channel in the WLAN settings. Auto to a specific number (for example, 1, 6 or 11 for the 2.4 GHz band) to improve connection stability.
If you've changed your password, but some older devices (smart plugs, old phones) are no longer working, check if they support the encryption type you selected. Modern standards WPA3 may not be compatible with older hardware requiring a fallback to WPA2.
Home Network Security Tips
After successfully changing your password, it is recommended to conduct a security audit of your network. Make sure the function WPS (Wi-Fi Protected Setup) is disabled in the router settings. Despite the convenience of connecting without entering a password, this technology has vulnerabilities that allow attackers to easily access the network.
Update your router firmware regularly. Manufacturer Eltex And Huawei Updates are released periodically to patch security holes. You can check for new software versions in the section System Tools or Administration -> Upgrade.
Use a guest network for visitors. Most modern MGTS routers allow you to create a separate access point for guests. This isolates their devices from your main local network, which may contain computers with important data and network printers.
What should I do if I forgot my new password immediately after changing it?
If you changed your password but forgot it, there are few options. If you haven't disconnected the computer used for setup, you can view the saved password in the wireless connection properties in Windows. If you've completely lost access, the only solution is to log back into the router (if you know the administrator password) or perform a hard reset.
Is it possible to change the password through the MGTS app?
Yes, the operator offers the ability to manage your home network through the "My MGTS" mobile app. In the "Equipment" or "Wi-Fi" sections, you can often change the network name and password without having to access the router's web interface via a browser. This is a more convenient method for casual users.
Does changing your password affect your internet speed?
Changing the password itself doesn't affect speed. However, if you simultaneously change the wireless channel or channel width in the settings, speed may either increase (if you select a clear channel) or decrease (if you select a noisy one). The password only encrypts traffic, adding a minimal load to the router's processor that is unnoticeable to the user.
How do I connect smart home devices after changing my password?
All smart home devices (lamps, outlets, vacuum cleaners) will lose connection with the router. You'll have to reconfigure each one using the corresponding app on your smartphone. To make things easier, you can create a separate guest network for IoT devices and change the password only on the main network, but this requires the router to support client isolation.