How to share Wi-Fi from an Honor phone: all the methods and settings

Sharing Internet from a phone Honor — a challenge faced by every second owner of a branded smartphone. Whether it's while traveling, the absence of a home router, or the need to connect a laptop to a mobile network, the function mobile hotspot It helps in a variety of situations. However, not everyone knows that setting up this option on devices with firmware EMUI or MagicOS has its nuances, and some operators impose restrictions on traffic distribution.

In this article, we will look at all the current methods for distributing Wi-Fi from phones. Honor (including models of the series Honor 90, Honor Magic5, Honor X and others), we will explain how to avoid typical errors (for example, IP configuration error or lack of connection of devices), and compare alternative methods - through USB modem And BluetoothWe'll pay special attention to security settings to ensure your access point doesn't become vulnerable to attackers.

If you have previously tried to enable distribution without success or encountered a message Failed to turn on the access pointHere you'll find solutions to most problems, from checking your tariff to resetting network settings.

1. Preparing your Honor phone for Wi-Fi sharing

Before turning on the access point, make sure that your Honor Ready for this operation. Skipping even one of the steps may result in failures or the inability to connect other devices.

The first and most important thing is - check your tariff plan. Many operators (for example, MTS, Beeline, Tele2) block internet tethering on cheap plans or limit its speed. To avoid unpleasant surprises:

• 📱 Open your carrier's app (e.g. My MTS or Beeline.Pro).
• 🔍 Find the "Services" or "Additional Options" section and check for the "Internet Sharing" or "Modem Mode" option.
• 💰 If the option is paid, activate it or change the tariff to a suitable one (for example, “Unlimited for everything” at Tele2).

Second - update the firmware. Outdated versions EMUI/MagicOS may contain bugs that interfere with the access point's operation. To update:

1. Go to Settings → System and updates → Software update.
2. Click Checking for updates and install the latest version if available.

Internet sharing tariff plan verified|

Firmware updated to the latest version|

Phone battery charge > 50%|

Disable VPN and proxy servers (if not used)|

Old access point profiles have been removed (in Settings → Mobile Network → Access Points)

-->

Third - check your APN settingsIncorrect network access settings may block distribution. To do this:

1. Go to Settings → Mobile networks → Access point names (APNs).
2. Select the active profile (usually it is marked with a check mark).
3. Compare the parameters with the standard ones for your operator (they can be found on the official website).

2. Enabling Wi-Fi Hotspot on Honor: Step-by-Step Instructions

The most popular way to distribute the Internet is through Wi-Fi hotspotIt's suitable for connecting laptops, tablets, and other smartphones. The instructions apply to all models. Honor on EMUI 10.0+ And MagicOS 7.0+.

To turn on the hotspot:

1. Open Settings (gear icon on the main screen).
2. Go to the section Mobile Network → Access Point and Modem (on some models the path may differ: Wireless Networks → Access Point).
3. Activate the switch Wi-Fi hotspot.
4. Click Setting up an access pointto set the network name (SSID) and password.

Recommended settings for security:

• 🔒 Network name (SSID): use Latin characters without spaces (for example, HonorHotspot_5G).
• 🔐 Security type: select WPA2-PSK (the most reliable option).
• 📶 Frequency range: if your phone supports 5 GHz, turn it on for less interference (but keep in mind that older devices may not see this network).
• ⏱️ Auto power off: Set a timer (e.g. 10 minutes of inactivity) to save battery life.

After saving the settings, other devices will be able to find your network in the list of available Wi-Fi networks and connect to it by entering the password.

What to do if the access point does not turn on?

If the switch Wi-Fi hotspot is inactive or an error appears when turning it on, try:

1. Restart your phone.

2. Temporarily disable VPN or proxy (in Settings → Wireless & Networks → VPN).

3. Reset network settings: Settings → System → Reset → Network reset (Wi-Fi and Bluetooth data will be deleted!).

4. Check if your operator is blocking distribution (see section 1).

3. Alternative ways to share internet with Honor

If Wi-Fi is unavailable for some reason (for example, the device's wireless module is broken), you can use other sharing methods:

3.1. Sharing via USB (modem mode)

This method is suitable for connecting laptops or PCs when Wi-Fi is disabled or unstable. Advantages:

• ⚡ Higher data transfer speed compared to Wi-Fi.
• 🔋 Less battery consumption of the phone (since it charges via USB).

To activate USB modem:

1. Connect your phone to your computer via original USB cable (cheap cables may not support data transfer).
2. In your phone settings, select Transferring data via USB (usually a notification appears after connection).
3. On PC in Network connections a new device will appear - Honor USB Ethernet/RNDIS.

3.2. Sharing via Bluetooth

A less popular but useful method if you need to connect a single device with minimal power consumption. The speed will be slower than Wi-Fi or USB, but the battery drain is minimal.

Instructions:

1. Turn on Bluetooth on both devices.
2. On the phone Honor go to Settings → Wireless & networks → Hotspot & tethering → Bluetooth tethering.
3. Pair the devices (on a computer you may need to enter a PIN, usually 0000 or 1234).
4. On your PC, in the Bluetooth settings, select your Honor and activate the option Connecting to the network.

Please note: Some laptops require additional configuration in Control Panel → Network Connections, where you need to manually turn it on Bluetooth Network Connection.

4. Common mistakes and their solutions

Even with proper configuration, users Honor We often encounter problems when distributing Wi-Fi. Let's look at the most common errors and how to fix them.

4.1. Error "Failed to turn on the access point"

This problem is usually related to:

• 📵 Operator blocking: check the tariff (see section 1).
• 🔄 APN Conflict: reset APN settings to default (in Settings → Mobile network → APN → Reset).
• 🔋 Energy saving: turn off the mode Ultra savings in the battery settings.

4.2. Devices do not connect to the access point

If the network is visible, but the connection does not occur:

• 🔒 Check it out password: You may have entered it incorrectly (case is important!).
• 📶 Make sure your phone is turned on mobile Internet (icon 4G/5G in the status bar).
• 🔄 Restart both devices (your phone and the one you're trying to connect to).
• 🛠️ Reset network settings on your phone: Settings → System → Reset → Network reset.

4.3. The Internet works, but it's very slow.

Reasons for low speed:

• 📡 Weak network signal: check the signal strength (if 1-2 bars, move closer to a window or use a repeater).
• 👥 Many connected devices: limit the number of clients to 3-5.
• 🔄 Background updates: Your phone may be downloading app updates - pause them Settings → Applications → Application Manager.
• 📶 Carrier throttling: Some plans throttle speed after high-speed traffic is used up.

Wi-Fi|

USB modem|

Bluetooth|

I don't use distribution-->

5. Security when sharing Wi-Fi from your phone

A mobile hotspot is a potential vulnerability if not configured correctly. Attackers can connect to your network, intercept traffic, or even access personal data. To prevent this:

1. Use a complex password:

• 🔐 Length must be at least 12 characters.
• 🅰️ A combination of uppercase and lowercase letters, numbers, and special characters (e.g. H0n0r_5G!WiFi_2026).
• 🚫 Don't use obvious combinations like 12345678 or password.

2. Limit network visibility:

• 👁️ In the access point settings, disable the option Network visibility (or Broadcast SSID). Then only those who know the exact name will be able to connect (SSID).
• 🔄 Change your network name regularly to make it more difficult for potential hackers.

3. Control connected devices:

• 📱 On the menu Wi-Fi hotspot click Connected devicesto see the list of clients.
• ❌ If you find an unfamiliar device, immediately block it and change the password.

4. Set up a firewall:

On phones Honor You can restrict internet access for connected devices:

1. Install a firewall application (for example, NetGuard or AFWall+).
2. In the firewall settings, create a rule that blocks access to the local network for connected devices.

5. Turn off the access point when it is not needed:

Even if you're not transmitting data, an active access point remains vulnerable to attack. Always turn it off after use.

6. Distribution features on different Honor models

Despite the fact that most phones Honor work on the base EMUI or MagicOSSome models have unique access point setup nuances. Let's look at the most popular series.

6.1. Honor 90, Honor 90 Pro, Honor 90 Lite

These models are on MagicOS 7.1+ support:

• 📶 Dual-band Wi-Fi (2.4 GHz and 5 GHz). It is recommended to use 5 GHz for less interference.
• 🔋 Optimized power consumption mode: The access point automatically reduces screen brightness and disables background processes.
• 🔒 WPA3: a more secure encryption protocol (included in Access Point Settings → Security).

6.2. Honor Magic5, Magic5 Pro

Flagship models have:

• ⚡ Wi-Fi 6 support: If the connected device also supports this standard, the distribution speed will increase to 900 Mbps.
• 📊 Traffic statistics: The hotspot menu displays how much data has been used by each connected device.
• 🔄 Automatic switching between 4G and 5G for stable distribution.

6.3. Honor X6, X7, X8, X9

Budget models of the line Honor X have limitations:

• 📶 Only 2.4 GHz (no support 5 GHz).
• 👥 Maximum 5 connected devices (versus 10 for flagships).
• 🔋 Battery drains quickly when distributing (connecting a charger is recommended).

Applicable to all models:

• 📱 If you can't share after updating your firmware, follow these steps: network reset.
• 🔧 On some models, the path to the access point settings may differ (for example, Settings → Advanced → Access Point).

How to check if your Honor supports 5G hotspot?

If your phone supports networks 5G (This is indicated in the model specifications), then the access point will also distribute the internet at 5G speeds. However, the connected devices must support this technology. For example, if you distribute 5G with Honor Magic5, but if you connect an old laptop with Wi-Fi 4 (802.11n), the speed will be limited to 150 Mbps.

7. How to save traffic when sharing the Internet

Sharing your phone's internet can quickly exhaust your data allowance, especially if you have multiple devices connected to your network. To avoid unexpected charges:

1. Limit the speed for connected devices:

• 📉 Use apps like NetMaster or Internet Speed Meterto control traffic consumption.
• ⚠️ In the access point settings of some models Honor there is an option Speed ​​Limit (for example, up to 10 Mbps for guest devices).

2. Block background traffic:

• 🚫 On connected devices, disable automatic app updates and cloud sync.
• 📵 On the phone Honor turn on the mode Saving traffic V Settings → Mobile network → Data saver.

3. Use data compression:

• 🗜️ Turn on the option Data compression in the browser (for example, in Google Chrome or Opera).
• 📱 Activate on your phone Easy mode V Settings → Battery → Performance mode.

4. Control connected devices:

• 👥 Regularly check the list of connected gadgets and disconnect those that are not in use.
• ⏱️ Set the access point to automatically turn off after 5-10 minutes of inactivity.

8. Frequently Asked Questions (FAQ)

🔹 Why isn't there a "Tethering" option on my Honor?

This may be due to:

• 📵 Operator blocking: Some tariffs (especially prepaid ones) do not support seeding.
• 🔧 Firmware limitation: on corporate or customized versions EMUI The function can be disabled.
• 🛠️ Hardware failure: If the Wi-Fi module is damaged, the access point will not work.

Solution: Check your tariff, update your firmware, or contact a service center.

🔹 Is it possible to share Wi-Fi from Honor without a password?

Technically yes, but that's extremely unsafeTo disable the password:

1. Go to Settings → Wi-Fi Hotspot → Set up hotspot.
2. In the field Security select Open network.

⚠️ Attention: in this case, outsiders will be able to connect to your network, which is fraught with:

• Traffic theft (and, as a result, additional costs).
• Data interception (if you log into your accounts through an unsecured connection).

🔹 How many devices can I connect to an Honor hotspot?

The quantity depends on the model:

• Flagships (Honor Magic5, Honor 90 Pro): up to 10 devices.
• Middle segment (Honor 80, Honor 70): up to 8 devices.
• Budget models (Honor X6, Honor X7): up to 5 devices.

However, in practice, connecting more than 3-4 devices can lead to:

• 🐢 Significant drop in speed.
• 🔋 Rapid battery drain.
• 🔄 Unstable connection.

🔹 Why does my phone get so hot when using Wi-Fi?

Heating is normal during active data transfer, but if the phone becomes hot (more than 45°C), this may indicate:

• 🔋 High CPU load: Wi-Fi distribution + background tasks (such as games or videos) overload the system.
• 📶 Weak network signal: The phone uses a lot of energy to maintain the connection.
• 🔄 Battery failure: If heating occurs even without load, have the battery checked at a service center.

Solutions:

• Disable unnecessary background apps.
• Remove the case (it may block the heat sink).
• Connect your phone to a charger (but do not use it for resource-intensive tasks while charging).

🔹 Is it possible to share internet from an Honor Smart TV?

Yes, but there are some nuances:

• 📺 Most Smart TV (For example, Samsung, LG, Sony) support connection to mobile hotspots.
• 🔍 In your TV settings, select your network Honor and enter the password.
• ⚠️ Attention: Some TVs require a static IP address. If you can't connect, enable it in your phone's hotspot settings. Fixed IP (if there is such an option).

If the TV does not see the network:

• Check that the access point is operating within range 2.4 GHz (many TVs do not support 5 GHz).
• Restart both your phone and TV.

Now you know everything about distributing Wi-Fi from phones. Honor — from basic setup to troubleshooting complex issues. If your model is behaving unusually or you encounter an error not covered in this article, check the official documentation on the website. Honor Or contact your operator's support team. A properly configured hotspot will make your mobile internet a convenient and secure tool in any situation.