How to share internet from an iPhone to a computer via Wi-Fi: instructions for Tele2 subscribers

Internet distribution with iPhone to the computer Wi-Fi — a convenient solution when you don't have a router or wired connection at hand. This is especially relevant for subscribers. Tele2, where mobile data is often cheaper than home internet. But many people encounter problems: the hotspot won't turn on, the PC can't see the network, or the speed leaves much to be desired.

In this article - step-by-step instructions taking into account the specifics Tele2 (including tariff restrictions), troubleshooting common errors, and connection optimization tips. We'll cover both the settings and the external settings. iPhone (including iOS 17), and on the computer with Windows 10/11 or macOSAnd also - what to do if The Internet is distributed, but it doesn't work on the PC. (spoiler: the problem is more often in the network settings, not in the phone).

Let's get started! If you've already tried sharing your internet and encountered an error, skip to the next section. Problem Solving.

Requirements and preparation: what you need to share the internet

Before setting up an access point, make sure the following basic conditions are met:

• 📱 iPhone With iOS 12 or newer (on iOS 17 the algorithm is the same, but the path in the menu may differ).
• 📶 Current tariff Tele2 with mobile Internet enabled. Important: Some tariffs limit traffic distribution (see the table below for more details).
• 💻 Computer with module Wi-Fi (or adapter) and support for standards 802.11a/b/g/n/ac.
• 🔋 Charge iPhone not less than 20% - Internet distribution actively consumes battery.

If you have Tele2 With an unlimited plan, check the terms: the operator may limit the upload speed after the high-speed package is used up. For example, with the "My Unlimited" plan, after 30 GB, the speed drops to 64 kbps—which is only enough for messaging apps.

⚠️ Attention: If you are connected to Tele2 With a corporate plan, internet tethering may be blocked at the operator level. Check details in your personal account or with a manager.

Setting up a hotspot on iPhone

Algorithm for enabling Internet distribution on iPhone the same for all models (from iPhone 6s to iPhone 15 Pro Max), but may differ depending on the version iOSWe will consider a universal method for iOS 15–17.

Open Settings and follow these steps:

1. Go to Cellular communications → Data transfer.
2. Make sure that mobile data enabled and SIM card selected Tele2 (if there are several).
3. Return to the main menu Settings and select Modem mode (in some versions - Access point).
4. Activate the slider Allow others.
5. Remember or change Wi-Fi password (default is a random set of characters).

After turning on, next to the network name (iPhone [your name]) A blue bar will appear, indicating that the device is ready to connect. If there is no bar, check if your data plan is blocking data sharing. Tele2.

The iPhone is connected to the Tele2 network (there is a 4G/5G indicator)

Modem mode is enabled (blue bar in the top menu)

Wi-Fi password copied or remembered

Other Wi-Fi networks are disabled on the PC (to avoid conflicts)-->

By default iPhone distributes Internet via protocol WPA2 - It's safe, but if you have an old computer (before Windows 7), it may be necessary to change the security type to WPATo do this:

1. On the menu Modem mode click on Wi-Fi password.
2. Select Security type → WPA (if there is no such option, update iOS).

⚠️ Attention: If the access point stops working after changing the security type, please return the settings to the previous ones. WPA2Some models iPhone (For example, iPhone XR and newer) do not support legacy protocols.

Connecting a computer to an iPhone hotspot

Now let's set up the computer. Instructions for Windows 10/11 And macOS differ, so choose your option.

For Windows 10/11

Click on the icon Wi-Fi in the lower right corner of the taskbar (next to the clock). In the list of available networks, find the name of your iPhone (format: iPhone [name]) and click on it. Enter the password you set on your phone and click Connect.

If the connection does not occur:

• 🔄 Restart your Wi-Fi adapter: Start → Parameters → Network and Internet → Network reset.
• 🛠️ Update your adapter driver via device Manager (chapter Network adapters).
• 🔒 Make sure that on iPhone the mode is not enabled Restrict access (on the menu Modem mode).

For macOS

Click on the icon Wi-Fi in the top panel (on the right) and select the network iPhone. Enter the password. If Mac does not connect:

• 🔄 Turn it off and on again Wi-Fi on Mac (System Preferences → Net).
• 🔒 Check what's on iPhone on the menu Modem mode connection allowed for Other devices (not only for For contacts only).

After successful connection on iPhone A notification will appear indicating the number of connected devices. If the internet on your PC isn't working, proceed to the section Problem Solving.

How to speed up internet sharing on iPhone

The distribution speed depends on three factors: rate Tele2, model iPhone And external interferenceHere's how to improve your connection:

• 📶 Switch to 5 GHz (if your iPhone and the computer is supported). To do this, in the menu Modem mode select Max. compatibility → 5 GHzThis will reduce the range but increase the speed.
• 📵 Disconnect other devices from iPhone — each connection “eats up” ~30% of the speed.
• 🔋 Connect iPhone to charging - when the battery level is low, the system automatically limits performance.
• 🌐 If you use Tele2 with speed limitation (for example, after 30 GB), try VPN (For example, Warp by Cloudflare) - sometimes this circumvents artificial limits.

To check your actual speed, use services like Speedtest.net or Fast.comRun the test directly on the computer connected to iPhoneIf the speed is below 10 Mbps with a plan that advertises 50+ Mbps, the problem is in the settings or interference.

iPhone model	Max upload speed (Mbps)	5 GHz support
iPhone 13/14/15 Pro	up to 1000	Yes (Wi-Fi 6)
iPhone 11/12/XS	up to 400	Yes (Wi-Fi 5)
iPhone 8/7/6s	up to 150	No

Troubleshooting: Why distribution isn't working

If the Internet is not distributed or works unstable, the reasons may be on the side iPhone, and on the side Tele2 or computer. Let's look at common errors and how to fix them.

1. The access point does not turn on

Symptom: Slider Allow others returns to position Off or gray.

• 📵 Check if they are enabled mobile data V Settings → Cellular communications.
• 📱 Reboot iPhone (hold down the power button + any of the volume buttons).
• 🔧 Reset network settings: Settings → Main → Transfer or reset iPhone → Reset → Reset network settings.

2. The computer doesn't see the iPhone's network

Symptom: Your Wi-Fi network name is not in the list of Wi-Fi networks. iPhone.

• 🔄 On iPhone turn it off and on again Modem mode.
• 💻 Update your Wi-Fi adapter driver on your computer (via device Manager on Windows or Software update on macOS).
• 📡 Check if it is turned on iPhone mode On the plane (even if Wi-Fi is enabled separately).

3. There is a connection, but the Internet doesn't work.

Symptom: The computer is connected to iPhone, but the pages don't load.

• 🌐 Check your balance and service status Tele2 — perhaps the traffic has run out or the operator is blocking the distribution.
• 🔧 Set it manually on your computer IP And DNS:

  IP: 192.168.2.2
  Mask: 255.255.255.0
  Gateway: 192.168.2.1
  DNS: 8.8.8.8

• 🔄 On iPhone turn it off VPN (if enabled) - it may conflict with distribution.

What should I do if Tele2 blocks data sharing?

Some Tele2 plans (such as "For Laptop") technically block internet sharing via a hotspot. This can be circumvented:

1. Connect your iPhone to your computer via USB and enable “Trust this computer” (sharing will take place via Lightning/USB-C).

2. Using a VPN on iPhone (such as Outline or Shadowrocket) – this disguises the traffic as regular mobile traffic.

3. Change your tariff to one that allows data sharing (check in your Tele2 account).

⚠️ Attention: If after all the manipulations the Internet on the computer works only in the browser, but not in applications (for example, Telegram or Steam), the problem is in the settings DNS or ProxyCheck your PC's network settings!

Alternative method: USB sharing

If Wi-Fi If it works unstable or is not on the computer, you can share the Internet through USB cableThis method is more reliable (no interference) and sometimes bypasses operator restrictions.

You will need:

• 🔌 Original or certified cable Lightning/USB-C → USB-A (or USB-C for new ones Mac).
• 💻 Computer with a port USB 2.0 or newer.
• 🍎 On Mac — latest version macOS (starting from Catalina).

Instructions:

1. Connect iPhone to the computer with a cable.
2. On iPhone in the window that appears, click Trust (If the request does not appear, disconnect and connect the cable again).
3. Open Settings → Modem mode and turn it on USB only (or Wi-Fi and USB).
4. Wait for the drivers to install on your computer (a reboot may be required on Windows).

Benefits of USB sharing:

• ⚡ Stable speed (up to 400 Mbps on iPhone 12 and newer).
• 🔋 Lower battery consumption iPhone (the phone is charging in parallel).
• 🛡️ Fewer vulnerabilities to hacking (unlike Wi-Fi).

Flaws:

• 🖥️ Need to keep it up iPhone next to the computer.
• 🔌 The port is busy USB (You cannot charge other devices at the same time).

Security: How to Secure Your Access Point

Open access point on iPhone — an easy target for hackers or neighbors who can "hook" on your traffic. Follow these rules:

• 🔐 Use complex password (at least 12 characters with numbers and letters). Avoid simple combinations like 12345678 or qwerty.
• 👥 Limit the number of connected devices: in the menu Modem mode select For contacts only (if you are giving it to friends).
• 🛡️ Turn off the hotspot when you don't need it - this will save battery and data.
• 🔄 Change your password regularly (once a month), especially if you connect in public places.

If you often share the Internet in cafes or on public transport, consider using VPN on iPhoneThis will encrypt your traffic and protect against data interception. Free options: ProtonVPN (no limits), Windscribe (10 GB/month).

⚠️ AttentionIn some countries (such as the UAE or China), tethering via a VPN may be prohibited by law. Check local regulations before traveling.

Check if there are any other devices connected to your network: iPhone on the menu Modem mode A list of connected devices is displayed. If you see an unfamiliar name, change the password and restart the access point.

Frequently asked questions

Is it possible to share internet from an iPhone to Tele2 without restrictions?

Depends on the tariff. In most unlimited tariffs (My Unlimited) sharing is allowed, but after the high-speed package (usually 30 GB) is used up, the speed drops to 64 kbps. On package tariffs (My Online) Traffic for distribution is deducted from the main balance. Check the details in your personal account. Tele2.

Why doesn't my iPhone share the Internet on Windows, but it works on my Mac?

Most often, the problem lies with the Wi-Fi adapter drivers on Windows. Update them via device Manager or download it from the laptop manufacturer's website. Also, check if your antivirus software is blocking the distribution (for example, Kaspersky or Avast) - temporarily disable it.

Is it possible to share internet from an iPhone to a TV?

Yes, if the TV has a module Wi-FiConnect to an access point iPhone as to a regular network. On Samsung or LG this is done through Settings → Net → Wi-Fi. For Android TV (for example, on Sony Bravia) manual entry may be required IP And DNS.

How many devices can I connect to an iPhone hotspot?

Technically, up to 5 devices simultaneously, but in practice, speed drops noticeably with just 2-3 connections. For stable operation, it is recommended to connect no more than 2 devices. On models iPhone 12 and newer, the limit has been increased to 10 devices, but the actual speed depends on the tariff Tele2.

How do I reset my iPhone's network settings if tethering isn't working?

Go to Settings → Main → Transfer or reset iPhone → Reset → Reset network settingsThis will delete all saved Wi-Fi networks and passwords, but will resolve most connection issues. After the reset, restart your phone.