How to Share Wi-Fi on an Honor 8X: From Setup to Troubleshooting

Smartphone Honor 8X Even after years, it remains a popular device thanks to its balanced characteristics and reliable firmware EMUIOne of the most popular features is the ability to share mobile internet Wi-Fi to other gadgets. However, users often have questions: how to properly configure an access point, why connected devices don't see the network, or why the network suddenly stops sharing. In this article, we'll cover all the nuances—from basic setup to troubleshooting rare errors.

It is important to understand that distributing the Internet from a phone uses modules Wi-Fi And mobile communications at the same time, which can affect the speed and stability of the connection. Honor 8X This process has its own peculiarities due to the version EMUI and hardware limitations. We tested all steps on firmware from EMUI 8.2 to 9.1 — the instructions are universal, but some menu items may differ slightly.

If you've previously encountered issues sharing Wi-Fi with other devices, be prepared: Honor 8X It behaves predictably, but requires the correct sequence of actions. For example, an incorrectly selected power-saving mode can interrupt sharing after 5 minutes, and the default network password is often too complex for connecting older laptops. Let's avoid all the pitfalls!

Preparing your phone for Wi-Fi sharing

Before turning on the access point, make sure that your Honor 8X ready for this task. First, check battery charge level Internet tethering consumes significant energy, and your smartphone may automatically disable the feature if the data usage drops below 20%. Secondly, make sure your mobile data meter has sufficient data: some carriers block tethering if the limit is exceeded.

It is also worth updating the firmware to the latest available version for Honor 8XIn older versions EMUI (below 9.0) there were bugs with the access point disconnecting spontaneously. You can check the firmware update in the menu. Settings → System → Software UpdateIf an update is available, install it before setting up distribution.

It is equally important to check mobile network settings:

• 📶 Network mode: switch to 4G (LTE) V Settings → Wireless & networks → Mobile networks → Network typeIn 3G mode, the distribution speed will be lower.
• 🔄 Data roaming: Disable it if you're on your home network. While roaming, your carrier may block data sharing.
• 📱 APN: Make sure that your internet access profile is configured correctly (usually the settings come automatically when you install your SIM card).

Step-by-step instructions: how to enable hotspot on the Honor 8X

Now let's move on to the main thing - turning on the modem mode. Honor 8X This is done through the settings menu, but there's also a quicker way through the notification panel. We'll look at both options.

Method 1: Via the notification panel (quick)

1. Swipe down from the top of the screen to open the notification panel.
2. Swipe down again to expand the full panel.
3. Find the icon Access Point (usually it is hidden behind a button ... or Edit).
4. Hold your finger on the icon for 1-2 seconds - the access point settings will open.

Method 2: Via the settings menu (full control)

1. Open the app Settings (gear icon).
2. Go to the section Wireless networks (or Connections depending on the version EMUI).
3. Select an item Access point and modem.
4. Activate the switch Wi-Fi hotspot.

Once activated, the network will be visible to other devices, but for stable operation, we recommend configuring additional settings:

Network Name (SSID) - Enter a unique one|Password - At least 8 characters|Security Type - WPA2 PSK|Frequency Range - 2.4 GHz (for compatibility)|Power Saving Mode - Disable-->

Optimal access point settings

The standard network parameters offered by Honor 8X, aren't always perfect. For example, an automatically generated password may contain special characters that aren't supported by some devices (such as printers or older laptops). Let's look at which settings should be changed for maximum stability.

1. Network name (SSID)

By default the network is called HONOR-XXXX, where XXXX are the last digits of the IMEI. It's best to rename it to something memorable, for example, My_Honor_HotspotThis will help avoid confusion if there are other access points with similar names nearby. Avoid using Cyrillic characters in your network name—some devices (especially Windows-based) may not see such networks.

2. Password

A standard password usually consists of 10-12 random characters. For convenience, you can set your own, but follow these rules:

• 🔐 Minimum length is 8 characters.
• 🅰️ Use both upper and lower case letters (A-z) and numbers (0-9).
• 🚫 Avoid special characters (!@#$%), if old devices will be connected to the network.

3. Frequency range

In the access point settings (Settings → Hotspot & tethering → Set up Wi-Fi hotspot) select range 2.4 GHzWhile 5 GHz offers greater speed, it has a shorter range and is not supported by some devices (such as smart speakers or cameras).

4. Power saving mode

By default EMUI The access point may turn off after 5-10 minutes of inactivity. To avoid this:

1. Go to Settings → Battery.
2. Select Power saving mode.
3. Disable the option Access point optimization (or add an app Settings to the list of exceptions).

How to find out the MAC address of connected devices?

Open Settings → Hotspot & Tethering → Connected devicesThis displays all devices using your network, along with their MAC addresses. This is useful if you need to restrict access to specific devices.

Common errors and their solutions

Even after proper configuration, Wi-Fi distribution on Honor 8X may operate unstably. Let's look at typical problems and how to fix them.

If none of the solutions helped, try resetting your network settings:

1. Go to Settings → System → Reset.
2. Select Reset network settings.
3. Confirm the action and restart your phone.

The error deserves special attention. "Unable to turn on the access point"It may arise due to:

• 📵 Lack of mobile internet (check your balance and APN settings).
• 🔧 Wi-Fi module malfunction (restarting the phone helps).
• 📱 Operator restrictions (some tariffs block distribution).

How to save battery life when sharing Wi-Fi

Sharing the internet is one of the most energy-consuming functions of a smartphone. Honor 8X With a 3750 mAh battery, the hotspot can drain your phone's battery in 3-4 hours of active use. Here are some ways to extend the battery life:

1. Reduce screen brightness

Even if you're not interacting with your phone, the display still consumes power in standby mode. Set the screen to turn off automatically after 15-30 seconds. Settings → Display → Sleep.

2. Disable unnecessary background processes

Close all apps except those needed for sharing. This is especially true for messaging apps and social networks, which are constantly syncing in the background. Use Settings → Applications → Runningto pause unnecessary processes.

3. Switch to the mode 4G only

If your region doesn't support 5G, disable the next-generation network search:

1. Go to Settings → Wireless & networks → Mobile networks → Network type.
2. Select 4G only (or 3G/4G, if the 4G signal is weak).

4. Use a charger

If you are sharing the Internet for a long time, connect your phone to a power outlet. Honor 8X It supports fast charging, so even with active sharing, the battery level will be maintained. However, avoid using cheap cables, as they can overheat.

How to check which apps are consuming the most battery?

Open Settings → Battery → Battery UsageThis displays the energy consumption of apps over the last 24 hours. Pay special attention to processes marked Wi-Fi or Mobile data.

Alternative ways to share internet with the Honor 8X

Wi-Fi isn't the only way to share internet with other devices. Honor 8X There are two more options available: USB modem And Bluetooth modemEach of them has its pros and cons.

1. Distribution via USB (modem)

This method is suitable if you need to connect a laptop or PC. Advantages:

• 🔌 More stable connection (no interference like Wi-Fi).
• 🔋 The phone is charging during use.
• 📶 High speed (limited only by the capabilities of the 4G modem).

To activate:

1. Connect your phone to your computer via USB cable.
2. In your phone settings, select Access Point and Modem → USB Modem.
3. Wait for the drivers to install on your computer (they are usually installed automatically).

2. Sharing via Bluetooth

This method is less popular, but it's useful if you need to connect a device without Wi-Fi (for example, some tablets or smartwatches). Cons:

• 🐢 Low speed (maximum 3-5 Mbps).
• 🔄 Limited number of connected devices (usually only 1).

To enable:

1. Activate Bluetooth on both devices.
2. Pair them in the menu Settings → Bluetooth.
3. Turn on Bluetooth modem in the access point settings.

Comparison of distribution methods:

Security when sharing Wi-Fi from your phone

Sharing your phone's internet connection creates a local network that other devices can connect to. This poses a potential security risk to your data. The following measures will help minimize the risks:

1. Use a complex password

As mentioned, the default password is Honor 8X It's often too complex to remember, but that's a plus from a security standpoint. If you change it to your own, avoid simple combinations like 12345678 or password. It is better to use:

• 🔢 A combination of letters, numbers, and symbols (e.g. kL9#pR2!).
• 🔄 Change your password regularly (every 1-2 months).

2. Limit the number of connected devices

In the access point settings (Settings → Hotspot & Tethering → Connected devices) you can see all the devices using your network. If you find an unfamiliar device, disconnect it immediately and change the password.

3. Turn off the access point when it is not needed

Many users leave hotspot access enabled "just in case," which creates unnecessary risks. Always turn off the hotspot after use—this will also save battery life.

4. Configure your firewall (if necessary)

If you share the internet with devices you don't trust (for example, in a public place), install a firewall app on your phone, such as NetGuardIt will allow you to block suspicious connections.

It's also worth remembering that some public Wi-Fi networks may block internet access from phones. If you're in a cafe, airport, or hotel and can't turn on your hotspot, check the network rules or ask the administrator.

FAQ: Answers to frequently asked questions

Is it possible to share Wi-Fi from Honor 8X without a SIM card?

No, to share mobile internet, you must have an active SIM card with a data plan. However, you can share Internet access via Wi-Fi (if the phone is connected to another network). To do this, enable the option Wi-Fi tethering mode in the access point settings.

Why does the connected device say "No Internet access"?

This error occurs for several reasons:

• 📵 There is no mobile Internet on the phone (check your balance or APN settings).
• 🔧 The operator is blocking data sharing (call support and check your tariff terms).
• 📱 The connected device has incorrect network settings (try forgetting the network and connecting again).

Also try restarting both devices.

How many devices can be connected to the Honor 8X hotspot?

Technically Honor 8X supports connection up to 10 devices simultaneously. However, in practice, even with 3-4 devices connected, speed drops noticeably and the battery drains faster. For stable operation, we recommend limiting the connection to 1-2 devices.

How to increase the range of an access point?

Wi-Fi range on Honor 8X Depends on obstacles and interference. To improve coverage:

• 📡 Place the phone in the center of the room, away from walls and metal objects.
• 🔄 Switch to the channel 2.4 GHz (it has a larger radius than 5 GHz).
• 📶 Use an external antenna (if supported by your model).

If the signal is still weak, try using USB modem instead of Wi-Fi.

Is it possible to share internet from the Honor 8X to a Smart TV?

Yes, but there are some nuances:

• 📺 Modern Smart TV (2018 and newer) connect to the access point without problems.
• 🔧 Older models may not support modern Wi-Fi standards. In this case, use USB modem (if the TV has a USB port) or Bluetooth modem (if supported).
• 🔐 When connecting, enter the password from your phone using the remote control or the TV's on-screen keyboard.