In today's world, internet access is becoming a critical resource, and situations where you don't have a Wi-Fi router but have a laptop or tablet that requires internet access are common. Honor 9As a powerful device supporting modern communication standards, the Wi-Fi 8.0 can easily create its own wireless network. This allows you to use mobile data for other devices, ensuring a stable connection wherever you need it.
The process of activating modem mode in EMUI, the operating system on which this device is based, is intuitive, but it has a number of hidden settings. Understanding these nuances will not only allow you to quickly launch your network but also secure it from unauthorized access and optimize power consumption. We'll cover every step in detail, from basic activation to fine-tuning security and frequency parameters.
It's worth considering that active data distribution significantly increases the load on the device's battery and processor. Wi-Fi hotspot is a power-hungry module, so prolonged operation in this mode can lead to rapid battery drain and heating of the case. However, with proper configuration Honor 9 demonstrates excellent connection stability, serving as a full-fledged replacement for portable routers.
⚠️ Note: The menu interface may vary slightly depending on the EMUI firmware version and the year of the security update release. If you don't see this option, check for system updates in Settings.
Basic hotspot activation via settings
To get started, go to your smartphone's main settings menu. Find the section usually labeled "Wireless & Networks" or immediately visible in the list of main options under the heading "Mobile Network" or "Connections." This is where the key switches controlling the device's communication modules are located.
Within this menu, select "Tethering." Clicking it will reveal several internet sharing options: USB, Bluetooth, and Wi-Fi. We're interested in the latter option, often called "Wi-Fi hotspot" or "Wi-Fi router." Move the slider to the active position.
Once enabled, the system automatically generates a default network name (SSID) and password. This information is usually displayed directly below the switch or accessible by clicking on the option name. You can use these settings to connect other devices, but it is highly recommended to change them to something more secure and memorable.
It's important to note that immediately after activation, a corresponding icon will appear in the notification bar, indicating that the distribution is in progress. Activity indicator Helps you monitor your connection status without diving into the menu. If the icon disappears, it's possible no one has connected to the network for more than a minute, and the power saving timer has activated.
Configuring security settings and network name
The security of the network you're creating is a top priority, as sensitive data may be passing through your internet connection. Access the access point settings menu by clicking on the network name or the gear icon next to the switch. Here you can change SSID (network name) to any convenient one for you, for example, “Honor9_Home_Office”.
In the security section, be sure to select the encryption type WPA2 PSKThis is the most secure and compatible standard currently available. Using an open network or the outdated WEP protocol makes your data vulnerable to interception and allows third parties to consume your traffic without your knowledge.
The password must be complex, contain both letters and numbers, and be at least 8 characters long. Avoid simple combinations like "12345678" or your date of birth. After entering the new password, be sure to click "Save," otherwise the settings will not be applied and the device will continue to operate with the old settings.
This section may also include an option to hide the SSID. If enabled, your network won't appear in the list of available networks on other devices, and you'll need to manually enter the network name to connect. This adds a layer of security through invisibility, but reduces usability.
Managing connected devices and limits
One of the useful features in Honor 9 One of the advantages of this feature is the ability to monitor connected clients. The access point menu often provides a list of devices currently using your internet connection. You can see their MAC addresses and the amount of data transferred, which helps identify "unwanted guests."
To prevent bandwidth congestion and rapid data consumption, it is recommended to set a limit on the number of connected devices. The system typically allows you to select a value from 1 to 10 users. The optimal limit for maintaining speed is 3-4 devices.
There's also an automatic hotspot shutdown feature. You can set a timer that will turn off the Wi-Fi module if no one connects to the network for a certain period of time (e.g., 5 or 10 minutes). This prevents battery drain if you forget to turn off tethering.
| Parameter | Recommended value | Impact on work |
|---|---|---|
| Frequency range | 5 GHz (if supported by the client) | High speed, shorter range |
| Encryption type | WPA2 PSK | Maximum data protection |
| Device limit | 3-5 pcs. | Consistent speed for every client |
| Sleep timer | 5-10 minutes | Saving battery power |
Using the 5GHz band for high speed
Honor 9 Supports two frequency bands: 2.4 GHz and 5 GHz. The standard 2.4 GHz band has a longer range and penetrates walls better, but it's often congested by neighboring routers and household appliances, reducing speed.
The 5 GHz band offers significantly higher data transfer rates and is less susceptible to interference. However, it does have a drawback: shorter range and poorer penetration through obstacles. For use in a single room or office, it's an ideal choice.
To switch to 5 GHz, go to the advanced settings of your access point. Find the "AP Frequency Range" or "AP Band" option. Select a value. 5 GHz preferred or "5 GHz Only." Keep in mind that older devices may not see the network in this range.
⚠️ Note: Not all laptops and tablets support the 5 GHz frequency. If your device doesn't see the network after switching, return the setting to 2.4 GHz or "Auto."
Switching frequencies may require rebooting the access point module. The system will warn you of this, and internet access will be interrupted for a few seconds. After switching on, check the speed on the client device; it should increase significantly with a strong cellular signal.
Power consumption and battery optimization
Sharing Wi-Fi is one of the most energy-consuming processes for a smartphone. Communication module operates in a mode of constant reception and transmission of large volumes of data, which causes heating of the processor and radio module. For owners Honor 9 You should be prepared for the battery charge to drain at a rate of 15-20% per hour.
To minimize the negative impact on battery life, try to avoid using your phone with demanding apps (such as games or navigation) while sharing. It's also recommended to reduce screen brightness or turn off the display completely if monitoring isn't required. Background app activity should also be limited.
If you plan on using internet access for a long time, it's best to connect your smartphone to a power source. However, keep an eye on the case temperature: the combination of charging and active Wi-Fi access can lead to critical overheating, after which the system will forcibly disable the access point to protect the components.
☑️ Battery optimization when sharing
You can check which apps are consuming the most power in the battery settings. Sometimes, it's not the Wi-Fi module itself that's the hog, but a specific app actively refreshing content in the background. Close these apps to extend battery life.
Solution and troubleshooting
Sometimes users encounter a situation where the hotspot is enabled, but the internet on the connected devices isn't working. First, check if the smartphone itself has internet access. Open a browser and try loading any page. If the pages don't load, the problem lies with your carrier or mobile network settings.
Another common issue is devices failing to connect, displaying the error "Unable to obtain IP address." In this case, try changing the Wi-Fi channel in the access point settings. Automatic channel selection sometimes causes conflicts. Manually select channels 1, 6, or 11 for 2.4 GHz.
It's also worth checking your carrier's APN (Access Point Name) settings. Incorrect APN settings can block data sharing, even if your regular mobile internet connection is working. Compare your settings with the information on your carrier's official website.
Reset network settings
If all else fails, try resetting your network settings. This will delete saved Wi-Fi passwords and Bluetooth settings, but it often resolves software conflicts with the network modules. Go to Settings → System → Reset → Reset Network Settings.
If the problem persists after rebooting the smartphone and rechecking all settings, there may be a software glitch in the firmware. In such cases, updating the system to the latest version or, as a last resort, performing a factory reset after backing up your data may help.
Is it possible to share Wi-Fi if there is no SIM card on the phone?
No, to share your internet connection via a mobile network, you need an active SIM card with a data plan. If you don't have a SIM card, your phone can only share a previously saved Wi-Fi (repeater mode), but Honor 9 The device does not support simultaneous Wi-Fi reception and distribution without special tricks.
Why is the speed through the phone lower than directly on it?
Speed will always be slightly lower due to encryption overhead, dual signal conversion (LTE to Wi-Fi), and wireless module bandwidth limitations when operating in access point mode. Distance and the number of connected devices also play a role.
Does the operator charge extra for modem mode?
Many modern plans include unlimited data transfer, but some operators may block this traffic or charge additional fees. Check your plan's terms in your operator account to avoid unexpected charges.
How many devices can be connected to Honor 9 at the same time?
Technically Honor 9 The router can support up to 8-10 simultaneous connections, but for stable operation and normal speed, it's recommended not to exceed 4-5 active devices. Exceeding this limit will result in significant overheating and a drop in speed for all users.