Honor 20 - a popular smartphone that supports the function mobile hotspot, which allows you to share internet with other devices. This feature is indispensable when traveling, at the dacha, or when your home router suddenly stops working. However, many users experience difficulties setting it up: the password doesn't work, devices don't see the network, or the speed leaves much to be desired.
In this article, we will analyze all the nuances of distributing Wi-Fi with Honor 20 — from basic setup to troubleshooting common issues. You'll learn how to properly activate your hotspot, optimize its performance, and even save battery life during extended use. And if you've encountered the "Unable to turn on hotspot" error, here you'll find proven solutions.
Preparing your smartphone for Wi-Fi sharing
Before turning on the access point, make sure that your Honor 20 ready for this task. First, check availability of mobile Internet — without it, there's simply nothing to share. Secondly, charge your phone to at least 30-40%, as the hotspot function consumes a lot of power. And finally, update your firmware to the latest version: in older versions EMUI There were bugs with the Wi-Fi module.
Pay special attention to your tariff plan. Many operators limit or completely block internet tethering on certain plans. For example, MTS And Beeline Traffic restrictions for hotspots may apply even with an unlimited plan. To avoid unexpected charges, please check with your carrier.
⚠️ Attention: If you are using a dual SIM card Honor 20, the access point will only work with the SIM card that is installed in the slot SIM1The second SIM card will not be able to receive calls in the background during this time.
- 🔋 Battery charge is at least 30% (optimally 50%+)
- 📶 Stable mobile network signal (2-3 antenna divisions)
- 🔄 Updated firmware (
EMUI 12or newer) - 💳 Tariff with permitted internet sharing
Step-by-step instructions: how to enable hotspot on the Honor 20
Activate Wi-Fi sharing on Honor 20 You can do it in a few steps. Open the app. Settings (gear icon) and go to the section Mobile Network → Access Point. Here you will see the main parameters: network name (SSID), password and security type. By default, the network is called HONOR-XXXX, Where XXXX — the last digits of your phone's IMEI.
To enable distribution, move the slider to the position On next to the item Portable Wi-Fi hotspotAfter 10-15 seconds, the network will become active, and you will be able to connect other devices to it. Please note: the first time you turn it on, the system may ask for confirmation via SIM card PIN code - This is a standard security measure.
Make sure you have mobile internet
Charge your phone to at least 30%
Update the firmware to the latest version
Check your tariff for distribution restrictions
Enable hotspot in settings-->
| Parameter | Default value | Recommended value |
|---|---|---|
Network Name (SSID) |
HONOR-XXXX |
Latin letters without spaces (for example, MyHonorHotspot) |
| Password | Random 8-digit code | At least 10 characters with numbers and letters |
| Security type | WPA2 PSK |
Leave WPA2 PSK (the safest) |
| Frequency range | 2.4 GHz |
5 GHz (if supported by connected devices) |
On Honor 20 When a hotspot is activated, the Wi-Fi module is automatically disabled in receiving mode. This means the phone won't be able to simultaneously share the internet and connect to another Wi-Fi network.
Setting up a network name and password
The default network name and password generated by your phone aren't always convenient. To change them, go to Settings → Mobile network → Hotspot → Set up Wi-Fi hotspotHere you can:
- 📛 Edit
SSID(network name) to something more memorable - 🔐 Set a new password (minimum 8 characters)
- 🔄 Select frequency range (
2.4 GHzor5 GHz) - 🔒 Change the security type (it’s better to leave it
WPA2 PSK)
When choosing a network name, avoid using Cyrillic characters and special characters—some devices (especially older laptops) may not display such a network in the list of available ones. The password should contain at least one uppercase letter, a number, and a special character for increased security. For example: Honor@2026_WiFi.
After saving the new settings, the hotspot will automatically restart. Connected devices will be disconnected and will need to re-enter the new password. If the network doesn't appear in the list of available networks, try restarting your phone or manually switching to airplane mode for 10 seconds.
Optimizing connection speed and stability
Internet distribution speed with Honor 20 It depends on several factors: mobile network quality, bandwidth usage, and phone settings. If the speed is slower than expected, try the following optimization methods:
- Switch the frequency range With
2.4 GHzon5 GHz(if your devices support it). The latter is less susceptible to interference, but has a shorter range. - Limit the number of connected devicesEach new device shares the available bandwidth.
- Disable background apps, consuming traffic (for example, cloud backups or app updates).
- Activate power saving mode to balance performance and battery life.
If the mobile network signal is weak (1 antenna bar), try moving closer to the window or using 4G signal repeaterOn . Honor 20 You can also manually select your operator's network: go to Settings → Mobile network → Network operators and select the mode ManuallySometimes this helps connect to a less busy tower.
Why is the upload speed slower than on my phone?
When distributing Wi-Fi, some of the traffic is spent on service packets (DHCP, encryption), so the actual speed on connected devices will be 10-30% lower than what the phone shows in the mobile network status.
Solutions to common problems
Even with proper configuration, users Honor 20 Sometimes we encounter errors. Let's look at the most common ones and how to fix them:
- 🚫 "Unable to turn on the access point" — Check if your carrier allows tethering. Also, try restarting your phone or resetting your network settings.
Settings → System → Reset → Reset network settings. - 🔍 Devices don't see the network - Make sure the access point is turned on and the network name (
SSID) does not contain hidden characters. Try changing the frequency range with5 GHzon2.4 GHz. - 🔌 There is a connection, but the Internet doesn't work. — Check your SIM card balance and APN settings. Sometimes switching the network mode from
4Gon3Gand back. - 🔋 The phone's battery drains quickly. - Disable unnecessary background processes and reduce screen brightness. You can also use
Power saving mode, but this may slightly reduce the distribution speed.
If the problem persists, try resetting your access point to factory settings. To do this, go to Settings → Mobile network → Portable hotspot → Reset settingsAfter this, you will have to reconfigure the network name and password.
⚠️ Attention: On some firmware versions Honor 20 After an update, the APN configuration may be lost. If the internet stops working, check the settings in Settings → Mobile network → Access point names (APN) and, if necessary, restore your operator's settings.
Saving battery life during long-term distribution
The hotspot function significantly increases the load on the processor and Wi-Fi module, which leads to rapid battery drain. To extend battery life, follow these tips:
- 🔋 Use
Power saving mode(can be turned on in the notification shade or inSettings → Battery). - 📴 Turn off
NFC,BluetoothAndGPS, if they are not used. - 🌑 Reduce screen brightness to minimum and set a short lock time (15-30 seconds).
- 🔌 Connect your phone to a charger if you plan to use Wi-Fi for more than 1 hour.
You can also limit the maximum upload speed. To do this, select Speed Limit and set the value like 10 MbpsThis will reduce the load on the processor, but may impact the comfort of using the internet on connected devices.
Alternative ways to distribute Internet
Besides Wi-Fi, Honor 20 supports other Internet sharing methods that may be useful in certain situations:
- 🔗 USB modem — Connect your phone to your computer via cable, and the internet connection will be transmitted via USB. This method is more stable and uses less power, but requires drivers on your PC.
- 📶 Bluetooth modem — suitable for connecting a single device (e.g., a tablet). The speed is slower than Wi-Fi, but the battery drain is minimal.
To activate USB modem, connect your phone to your computer, then go to settings Mobile Network → Hotspot → USB Modem and turn on the slider. For Bluetooth modem First pair the devices, then enable the corresponding option in the same settings.
Please note: When using a USB modem on Honor 20 Access to the phone's internal memory from a computer may be blocked. This is normal security system behavior. EMUI.
FAQ: Answers to frequently asked questions
Is it possible to share Wi-Fi from the Honor 20 if the phone is connected to another Wi-Fi network?
No, Honor 20 The phone doesn't support both client and hotspot mode simultaneously. When Wi-Fi hotspot is activated, the phone automatically disconnects from the external network.
How many devices can be connected to the Honor 20 hotspot?
The technical maximum is 10 devices, but for stable operation, it is recommended to connect no more than 5-6. Each additional device reduces the available bandwidth.
Why did the access point stop working after updating the firmware?
In some versions EMUI After the update, the APN settings are lost. Go to Settings → Mobile network → Access point names (APN) and restore your carrier's settings. If that doesn't help, reset your network settings.
Is it possible to change the Wi-Fi channel on Honor 20?
No, in the standard settings Honor 20 There is no option to manually select a channel. The phone automatically selects the least crowded channel in the range. 2.4 GHz or 5 GHz.
How to share Wi-Fi from Honor 20 without a password?
This is possible, but highly discouraged for security reasons. If necessary, select the appropriate security type in the access point settings. Open networkPlease remember that this will allow unauthorized devices to connect to your network.