How to share internet from the Honor 10i via Wi-Fi: a complete guide with all the details

Transform your smartphone Honor 10i into a full-fledged Wi-Fi hotspot is easier than it seems. This phone is based on Android 9 Pie (with possible upgrade to Magic UI 3.1) supports all modern Internet distribution standards - from classic Wi-Fi Hotspot to USB and Bluetooth modems. But many users encounter common problems: devices don't connect, speeds drop, or the access point suddenly disconnects. In this article, we'll look at All methods of distributing Wi-Fi With Honor 10i, including hidden settings and workarounds for common errors.

The main advantage Honor 10i in this regard - support dual SIM card (LTE on both), which allows for flexible selection of internet sources for tethering. However, there are some pitfalls: for example, some carriers block the modem function on certain plans, and older firmware versions can experience glitches when the hotspot is running for long periods. We tested all methods on the latest software versions and compiled checklists, which will help you avoid typical mistakes.

If you've never set up a hotspot on Android before, don't worry: Honor 10i This process is as simplified as possible. But even experienced users will find useful tips here—for example, how to increase the hotspot's operating time without recharging or why Windows 11 laptops sometimes don't see the Honor network, even though other devices connect normally..

1. Preparing your phone for Wi-Fi sharing

Before you enable tethering, make sure your Honor 10i ready for this task. Here are the key points that 90% of users check only after before they encounter problems:

• 📶 Check your mobile network signal strengthIf you only have one or two 4G bars, your data connection speed will be extremely slow. It's best to move closer to a window or use a SIM card with better coverage.
• 🔋 Battery charge must be at least 30%. If the level is below 15%, the phone may automatically turn off the hotspot to save energy.
• 📱 Update the firmwareOlder versions of Magic UI had bugs with the modem. You can check if the software is up to date in Settings → System → Software Update.
• 💳 Check the tariff conditionsSome operators (for example, Tele2 or Yota) block internet tethering on cheap plans or charge additional fees.

Pay special attention energy saving settings. IN Honor 10i the mode may be enabled by default Smart energy saving, which limits background activity, including hotspot operation. To avoid this:

1. Go to Settings → Battery → Power saving mode.
2. Select Performance or Balanced (but not Energy saving).
3. In the section Launching applications find Personal hotspot and allow autostart.

⚠️ Note: If you use two SIM cards, the hotspot will only share data from the one selected as the primary data card. You can check this in Settings → Wireless & networks → Mobile networks → Data usage.

2. Enabling modem mode through settings

The most reliable way to activate the hotspot is through the standard settings menu. Here are step-by-step instructions, taking into account the specifics. Magic UI:

1. Open Settings (gear icon on the home screen or in the notification bar).

2. Go to the section Wireless Networks → Personal Hotspot (on some firmware versions the path may be called Modem and access point).

3. Tap on Setting up a Wi-Fi hotspot.

4. Here you can:

- Change network name (SSID) — by default this is the phone model.

- Install password (minimum 8 characters, numbers and letters recommended).

- Choose frequency range: 2.4 GHz (better for range) or 5 GHz (faster, but shorter range).

5. Go back and turn on the slider Wi-Fi hotspot.

After activation, an icon will appear on the screen 📶 labeled "Access Point." Now other devices can connect to your network. The first connection may take up to 30 seconds. - This is fine.

The network name (SSID) is displayed in the Wi-Fi list|The password is entered correctly (case-sensitive!)|VPN is disabled on the connecting device|The phone is not overheated (at temperatures > 40°C, the access point may turn off)

-->

3. Alternative methods of Internet distribution

Wi-Fi isn't the only option. Honor 10i There are two more methods available that can be useful in different situations:

• 🔌 USB modem: Suitable for connecting to a PC or laptop. Speed ​​is more stable than Wi-Fi, but requires a cable. Enabled in the same menu. Personal hotspot → USB modem.
• 🔵 Bluetooth modem: More energy efficient than Wi-Fi, but the speed is limited to ~3 Mbps. Useful for connecting tablets or smartwatches. Turns on in Settings → Devices → Bluetooth, then you need to pair the devices and turn them on Modem via Bluetooth.

Let's compare all three methods in the table:

For most tasks (distribution to a laptop, tablet or second phone) it is optimal Wi-FiA USB modem is a lifesaver if you need a stable connection for downloading large files, and Bluetooth is useful for devices without Wi-Fi or when battery life is a concern.

4. Security settings and speed optimization

By default Honor 10i creates an access point with WPA2-PSK encryption This is enough to protect against most threats. However, there are a few tricks that will make your network even more reliable and faster:

Safety:

• 🔐 Change the default password to a complex one (for example, k7F#9pL2!q). Avoid simple combinations like 12345678.
• 👥 Limit the number of connected devices. You can set a limit in the hotspot settings (we recommend no more than 5 devices at a time).
• 🕒 Turn on Auto power off after 5-10 minutes of inactivity (saves battery).

Speed ​​optimization:

If your internet connection is slow, try:

1. Switch from 2.4 GHz on 5 GHz (if the connected device supports it).
2. Disable background apps on your phone (especially instant messengers and cloud services).
3. Manually select 4G/LTE network in Settings → Mobile network → Network type (sometimes the phone gets stuck on 3G).

⚠️ Note: Some applications (eg. Tinkoff Bank or Sberbank Online) block access when a hotspot is active for security reasons. If you need to use banking services, temporarily disable hotspot access.

Why is the upload speed slower than on my phone?

When tethering, the internet goes through an additional processing layer on the phone, which can reduce speed by up to 20%. Carriers can also artificially limit the speed for dial-up mode (especially on unlimited plans).

5. Typical problems and their solutions

Even with proper configuration, users Honor 10i Sometimes you encounter errors. Here are the most common ones and how to fix them:

Problem 1: Devices do not connect to the access point.

• 🔄 Restart your phone and try turning on the hotspot again.
• 📱 Check if the phone is in the "Don't worry" mode. On the plane or Energy saving.
• 🔧 Reset network settings: Settings → System → Reset → Network reset.

Problem 2: The access point keeps disconnecting.

• 🔋 Connect your phone to a charger—when the battery level is low, Android forcibly disables the modem.
• 🔥 Check your phone's temperature (use the app) AIDA64). If the temperature gets too high (>45°C), the access point turns off.
• 📴 Turn off Adaptive battery in the energy saving settings.

Problem 3: Slow speed or connection drops.

• 📡 Switch to a different Wi-Fi frequency (with 2.4 GHz on 5 GHz or vice versa).
• 📵 Make sure there are no sources of interference nearby (microwaves, other routers on the same channel).
• 📶 Manually select your carrier's network in Settings → Mobile network → Network operators (sometimes the automatic selection is glitchy).

If nothing helps, try reset network settings to factory:

Settings → System → Reset → Network reset

This will delete all saved Wi-Fi networks and passwords, but often solves problems with distribution.

6. Hidden functions and advanced settings

IN Honor 10i There are several "secret" features that aren't mentioned in the official instructions. They'll be useful for experienced users:

1. Change the Wi-Fi channel

By default, the phone selects a channel automatically, but in conditions of severe interference, you can set it manually. To do this:

1. Turn on the access point.
2. Install the application Wi-Fi Analyzer (available in AppGallery or Google Play).
3. See which channels are the least loaded in your environment.
4. Enter the code into the engineering menu:

   ##2846579##

5. Go to ProjectMenu → Wi-Fi → Channel and select a free channel.

2. Increasing the operating time of the access point

To prevent your phone from turning off the modem when idle:

1. Activate Developer mode (tap 7 times Build number V Settings → About phone).
2. Return to Settings → System → Developer options.
3. Find the option Do not turn off data transfer and turn it on.

3. Sharing the Internet via USB cable without notifications

If you are annoyed by constant notifications about connecting a USB modem:

1. Connect your phone to your PC.
2. In the notification panel, tap on USB modem is active.
3. Select Always hide notifications for this mode.

⚠️ Warning: The engineering menu and developer modes are intended for advanced users. Incorrect settings may cause your phone to malfunction. If you're unsure, don't change any settings you don't understand.

7. Saving traffic and battery during long-term distribution

Sharing your data is one of the most power-hungry features of a smartphone. To avoid being left without connection and battery at the most inconvenient moment, follow these tips:

Traffic saving:

• 📊 Use traffic monitoring apps (e.g. Traffic Monitor) to track which devices are consuming internet.
• 🚫 Block background app activity on connected devices (especially auto-updates and cloud syncs).
• 🎥 Limit streaming video. For example, on YouTube, you can set the quality 480p instead of 1080p.

Battery Saving:

• 🔋 Connect your phone to a charger (preferably the original adapter). Sharing Wi-Fi drains the battery 2-3 times faster.
• ☀️ Reduce screen brightness to 30-40%.
• 📴 Disable unnecessary sensors: GPS, NFC, second SIM card (if not in use).

If you need to share your internet connection for a long time (for example, at your dacha or while traveling), consider alternatives:

- Portable 4G router (For example, Huawei E5577) - it is less power-hungry and supports up to 16 devices.

- Powerbank with Wi-Fi hotspot (For example, Xiaomi Mi Power Bank Pro).

FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 10i

Is it possible to share Wi-Fi from Honor 10i without a password?

Technically yes: you can select it in the access point settings No protectionHowever, this is extremely unsafe—other people could connect to your network, and your carrier could block your SIM card for suspicious activity. It's better to use a password and, if necessary, share it via a QR code (available in the hotspot settings).

Why doesn't the laptop see the Honor 10i's access point, but the phone does?

This issue is often related to the Wi-Fi adapter settings on your laptop. Try:

1. Update your Wi-Fi adapter driver via device Manager.
2. Enable support for the standard 802.11n in the adapter settings.
3. Disable the feature Random Hardware Addresses in Windows Wi-Fi settings (if enabled).

If that doesn't help, try connecting via a USB modem.

How many devices can be connected to the Honor 10i hotspot?

Officially, it supports up to 10 devices. However, in practice, after just 5-6 connections, speeds drop noticeably, and the phone starts to heat up. For stable operation, we recommend limiting the connection to 3-4 devices. If you need more, use an external 4G router.

Is it possible to share Wi-Fi from the Honor 10i if the phone itself is connected to another Wi-Fi network?

No, Honor 10i does not support the function Wi-Fi Repeater (network repeater). The phone can either distribute Wi-Fi, or connect to it. An alternative is to use apps like NetShare (requires root rights) or connect the phone to the router via cable (if the router supports USB ports).

How do I reset my access point to factory settings?

If you've changed your network settings and want to restore them:

1. Go to Settings → Wireless & networks → Personal hotspot.
2. Tap on Setting up a Wi-Fi hotspot.
3. Click Reset settings (usually in the upper right corner).

After this, the network name (SSID) and password will return to the default values.