How to share internet from an Honor 9X phone: a complete guide with all the details

Transform Honor 9X Connecting a smartphone to a full-fledged router is a challenge that smartphone owners face when they don't have home Wi-Fi or need to connect a laptop, tablet, or other device to mobile internet. Despite the apparent simplicity of the "Access Point" feature, users often have questions: Why is the upload speed slower than on a phone? How can I save battery life? Why aren't some devices connecting? This article will not only provide step-by-step instructions but also reveal hidden settings, which the manufacturer does not advertise.

Honor 9X (models HLK-AL00, HLK-AL10, HLK-TL00) runs on a processor Kirin 710/710F and supports Internet distribution via Wi-Fi (2.4/5 Hz), Bluetooth And USB cableHowever, not everyone knows that Wi-Fi Direct protocol It's implemented here with limitations, and the maximum number of connected devices depends on the firmware version. We've tested all sharing methods on the latest versions. EMUI 9.1/10.0 and identified key points that affect connection stability.

Unlike flagship models Huawei/Honor, where the access point is configured automatically, in 9X Sometimes, manual adjustment of the Wi-Fi channel or even resetting network settings is required. This is especially true for users who have updated their firmware over the air, as such updates often disrupt optimal distribution parameters. If you've previously encountered a situation where devices connect but the internet doesn't work, the problem may lie in IP address conflict or incorrect selection of frequency range.

In this article you will find:

• 🔧 Step-by-step instructions for enabling the hotspot (including hidden options).
• 📶 Analysis of distribution speed at different frequencies (2.4 vs. 5 Hz) and how to choose the optimal channel.
• ⚡ Ways to save battery life during long-term distribution.
• ❌ Common errors and their solutions (from "No internet connection" to "Limited").

1. Preparing your phone: What to check before sharing Wi-Fi

Before turning on the access point, make sure that your Honor 9X I'm ready for this task. Many users miss basic points that later cause problems. Here's mandatory checklist:

Pay special attention SIM card. Honor 9X Supports tethering only from the SIM card that is used for mobile data by default. If you have two SIM cards, go to Settings → Wireless & Networks → Mobile Networks and select the main one. Also check that you have a tariff with unlimited or sufficient traffic is active — Some operators block distribution when the limit is exceeded.

Another critical point is - power saving modeIf enabled, your phone may automatically turn off the hotspot after 5-10 minutes of inactivity. To avoid this:

1. Open Settings → Battery.
2. Select Performance mode (or disable power saving completely).
3. In the section Launching applications Find "Access Point" and enable autostart.

⚠️ Attention: If you use Honor 9X with firmware EMUI 9.1 and below, after upgrading to EMUI 10.0+ The SIM card's tethering priority may be off. Check your mobile network settings again!

It wouldn't be a bad idea to checking for firmware updatesGo to . Settings → System → Software Update and install the latest patches. In new versions EMUI Improved access point stability, especially when connecting more than 3 devices simultaneously.

2. Enabling the access point: step-by-step instructions

Now let's move on to the main thing - how to enable Wi-Fi distribution on Honor 9XThe process takes less than a minute, but there are some nuances that affect the speed and reliability of the connection.

Method 1: Via the notification panel (quick access)

1. Swipe down from the top of the screen to open the notification panel.
2. Find the icon Access point (It's usually hidden - swipe left on the panel to see all the icons).
3. Tap and hold the icon for 1-2 seconds to open the settings.
4. Activate the switch Wi-Fi hotspot.

Method 2: Via the settings menu (advanced options)

1. Open Settings → Wireless & Network → Hotspot & Tethering.
2. Select Wi-Fi hotspot.
3. Turn on the slider at the top of the screen.
4. (Optional) Click Setting up an access pointto change the network name (SSID), password, or channel.

By default the network will be called HONOR-XXXX (where XXXX are the last digits of your phone's IMEI), and the password will be generated automatically. We recommend change network name to something more memorable (for example, MyHonor9X_Hotspot), and set a password of at least 8 characters, including numbers and letters. This will protect you from unauthorized connections.

Once the hotspot is activated, a notification will appear on the screen displaying the number of connected devices and data usage. You can also quickly disable the hotspot or change its settings.

3. Speed ​​optimization: choosing a Wi-Fi channel and band

Many users Honor 9X They complain about low upload speeds, even though the internet on the phone itself is fast. The reason is often incorrectly selected Wi-Fi channel or frequency range. By default, the phone selects a channel automatically, but this isn't always optimal.

How to choose the best channel manually:

1. Go to Settings → Hotspot & tethering → Wi-Fi hotspot → Set up hotspot.
2. Click on Frequency range and select 2.4 GHz or 5 GHz.
3. In the section Channel Disable automatic selection and select the channel manually.

To select the optimal channel, use the table below. We have tested all channels on Honor 9X in urban development conditions:

Critical Information: On Honor 9X with firmware below EMUI 10.0 The 5 GHz band may be blocked in some regions. To unblock it, go to Settings → System → Developer options and enable the option "Enable 5G Wi-Fi".

When to choose 2.4 GHz and when 5 GHz?

• 📱 2.4 GHz: Suitable for connecting older devices (laptops before 2015, some printers), passes through walls better, but is subject to interference from other networks.
• 🚀 5 GHz: Optimal for modern smartphones, tablets, and laptops. It offers higher speed and less interference, but has a shorter range (not suitable for use in a large apartment).

⚠️ Attention: If you're distributing internet via 5 GHz and the connected device can't see the network, check if it supports this band. For example, iPhone 6/6S and many budget Android smartphones only work at 2.4 GHz.

4. Saving battery life during long-term distribution

Sharing Wi-Fi is one of the most energy-consuming functions of a smartphone. Honor 9X with battery 4000 mAh A hotspot can drain your phone's battery in 3-4 hours with heavy use. To extend battery life, follow these tips:

The main ways to save:

• 🔋 Turn it off Searching for Wi-Fi in sleep mode in the access point settings.
• 📴 Reduce screen brightness to 30–40% and enable adaptive brightness.
• 🔄 Disable automatic data synchronization (for example, for email or cloud services).
• 📵 Use Airplane mode with only Wi-Fi enabled (if you don't need to make calls).

Another effective method is maximum upload speed limitThis will reduce the load on the processor and battery:

1. Install the application NetMaster or Network Signal Speed from AppGallery.
2. Find the option in the app settings Limit Hotspot Speed.
3. Set the limit to 10–15 Mbps (this is enough for watching HD video).

If you share internet regularly, consider using powerbank or connecting the phone to a charger. However, keep in mind that when actively distributing Honor 9X may become hot - in this case, remove the case and place the phone on a flat surface for better cooling.

5. Common mistakes and their solutions

Even after proper configuration, the access point Honor 9X may work unstable. We have collected TOP 5 mistakes and ways to eliminate them:

1. Devices connect, but the Internet doesn't work.

• 🔄 Restart your phone and the connecting device.
• 📱 Check that your mobile internet is enabled and working (open a browser on your phone).
• 🔧 Change the access point settings Security type With WPA2-PSK on WPA-PSK (sometimes helps for older devices).

2. The connection keeps dropping out

• 📶 Change the Wi-Fi channel (optimally 6 for 2.4 GHz or 36 for 5 GHz).
• 🔋 Disable power saving mode for the "Access Point" function.
• 📵 Make sure the distance between devices does not exceed 10 meters (for 5 GHz - 5 meters).

3. Low distribution speed

• 🚀 Switch to the 5 GHz band (if your device supports it).
• 📡 Disable all background downloads on your phone (app updates, cloud backups).
• 🔄 Reset network settings: Settings → System → Reset → Network reset.

4. You can't connect more than 3 devices

• 📱 Update your firmware to the latest version EMUI.
• 🔧 Manually set the connection limit in the engineering menu (see spoiler below).
• 📵 Use USB sharing for one device and Wi-Fi for the rest.

How to increase the limit of connected devices?

To do this, you need to enter the engineering menu. Enter the code in the "Phone" app. ##2846579##, then go to ProjectMenu → Background Settings → Wi-Fi Hotspot and change the parameter Max Client by 5–8. Be careful—incorrect changes can cause crashes!

5. The phone overheats and turns off the access point

• 🔥 Remove the case and place the phone on a hard surface.
• ❄️ Reduce screen brightness and close all background apps.
• 📵 Connect your phone to a charger (but don’t use fast charging, as it increases heating).

⚠️ Attention: If the access point no longer turns on after resetting the network settings, check if the APN settings have been reset. Go to Settings → Mobile network → Access point names (APN) and restore your operator's settings.

6. Alternative methods of Internet distribution

If Wi-Fi distribution is not suitable for some reason, Honor 9X supports two more Internet methods: via Bluetooth And USB cableEach of them has its pros and cons.

1. Sharing via Bluetooth

Suitable for connecting a single device (e.g., laptop or tablet). Speed ​​is limited. 1–3 Mbps, but battery consumption is minimal.

How to enable:

1. Activate Bluetooth on both devices.
2. On your phone, go to Settings → Hotspot & Tethering → Bluetooth Tethering.
3. Pair the devices and turn on sharing.

2. Distribution via USB (USB-ethernet)

The most stable method, the speed is limited only by the capabilities of the USB port (up to 50–60 Mbps on Honor 9X). Suitable for laptops without Wi-Fi or when long-term work is required.

How to enable:

1. Connect your phone to your computer via USB cable.
2. On your phone, select Data transfer (not "Charging").
3. Go to Settings → Hotspot & Tethering → USB Tethering and turn on the function.

Comparison of distribution methods:

If you need to connect game console (For example, PS4/PS5 or Xbox), use USB sharing - this is the only method that guarantees minimal delays (ping). For Smart TV 5 GHz Wi-Fi is better if your TV supports this range.

7. Security: How to protect your access point

An open hotspot on your phone poses a risk not only to your traffic but also to your data security. Attackers can intercept transmitted information or connect to your network for illegal activities. Here's how to protect yourself:

Basic protective measures:

• 🔐 Use a complex password (at least 12 characters with numbers and special characters).
• 🔄 Change your password every 1–2 months (especially if you share the Internet in public places).
• 📵 Turn off the access point when it is not needed.
• 🚫 In the router settings (if you are connecting to a home network), disable WPS - This protocol is vulnerable to hacking.

Additional settings for advanced users:

1. Install the application NetGuard or GlassWire to monitor connected devices.
2. In the engineering menu (##2846579##) turn it off Wi-Fi Direct, if you don't use it.
3. Set up MAC filtering (allow connection only for known devices).

If you are distributing Internet in a cafe, airport or other public place, turn on VPN on the connecting device. This will protect your data from possible interception. For Honor 9X Free VPN services like ProtonVPN or Windscribe (available in AppGallery).

⚠️ Attention: Some mobile operators block hotspot access if you're using an unlimited data plan. In this case, your data may be charged as "extra" or even disconnected. Check with your operator for details!

FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 9X

Can I share Wi-Fi from my phone if I have an unlimited data plan?

Yes, but some operators (eg. Megaphone or Beeline) may limit upload speed after exceeding a certain limit (usually 10–20 GB per month). Check your account or contact support for details.

Why can't my laptop see the access point from my phone?

There may be several reasons:

• The Wi-Fi adapter is disabled on the laptop (check in "Device Manager").
• The phone distributes the network at a frequency of 5 GHz, but the laptop only supports 2.4 GHz (change the range on the phone).
• Hidden network mode (SSID hidden) is enabled in the access point settings - disable it.

How to increase the range of an access point?

The radius depends on the range:

• For 2.4 GHz: The maximum range is up to 20 meters indoors. To improve the signal, place the phone closer to the center of the room and remove the case.
• For 5 GHz: The range does not exceed 10 meters, but the speed is higher. Use this range only in small spaces.

If the signal is weak, try using Wi-Fi repeater (connect it to your phone's hotspot).

Is it possible to share internet from a phone to a Smart TV?

Yes, but there are some nuances:

• Majority Smart TV (For example, Samsung or LG) only support the range 2.4 GHz.
• On your phone, in the hotspot settings, select 2.4 GHz only and set channel 6 or 11.
• If your TV doesn't connect, try changing the security type from WPA2 on WPA.

How do I share internet from my phone to my PC via USB if the driver won't install?

Problem with drivers HUAWEI Mobile Connect Occurs on Windows 7/10. Solution:

1. Download the driver from Huawei's official website (select model Honor 9X).
2. Connect your phone to PC in mode File transfer.
3. Update the driver manually via device Manager (section "Network adapters").

If that doesn't help, try a different USB cable or port.