Smartphones of the series Honor 8Despite their age, these devices remain popular thanks to their balanced specifications and high-quality screens. Often, situations arise when you urgently need to provide internet access to a laptop or tablet, but there is simply no other connection method. mobile hotspot In such cases, it becomes an indispensable tool for work and entertainment.
In this article, we'll cover in detail how to properly activate tethering mode, what settings should be changed for stable operation, and how to avoid rapid battery drain. Modern versions of the shell EMUI provide flexible settings that allow you to manage connected devices and traffic.
You will learn about the nuances of working with frequencies 2.4 GHz And 5 GHz, and get answers to frequently asked questions about connection security. Proper setup will turn your phone into a fully-functional, pocket-sized router.
Preparing your smartphone and checking the SIM card
Before proceeding with software settings, you need to make sure the device is physically ready for use. Make sure a SIM card with an active data plan and a positive balance is inserted in the slot. Without an active mobile Internet Data distribution will not be possible even if the sliders in the menu are enabled.
It's also worth checking the signal strength in your location. If the indicator shows one or two bars, the data transfer speed on connected devices will be low, and the phone's battery will start to heat up due to increased radio activity. Ideally, the signal should be strong, at least three bars.
Pay attention to your battery charge. Hotspot mode significantly increases power consumption. If the charge is below 30%, it's best to connect your smartphone to a power source or power bank to prevent it from shutting down at the most inopportune moment.
⚠️ Caution: When using 4G/LTE in an area with poor reception, your phone may become very hot. This is a normal physical reaction, but prolonged use at high temperatures can shorten battery life.
☑️ Pre-launch check
Activating the hotspot via quick settings
The fastest way to enable tethering on Honor 8 — Use the notification panel. Swipe down from the top of the screen to open the menu bar. Find the icon with the name Access point or Hotspot.
If you don't see the icon you need on the first page, click the edit button (usually a pencil or three dots) and drag the icon to the active area. Once the slider is activated, the phone will begin broadcasting. Wi-Fi network.
By default, the network name will contain the model of your device, for example, Honor 8-XXXXThe password is also generated automatically. This information can be accessed by pressing and holding the hotspot icon or by going to the settings menu.
This method is convenient for a quick connection, but it doesn't allow you to change important settings, such as frequency range or traffic limit. For full configuration, you need to go into the system's deep menu.
Advanced hotspot settings
To manage the network, go to the menu Settings, then select the section Wireless networks and find the item Mobile hotspotAll key connection management tools are concentrated here.
First, we recommend changing the network name (SSID) and password. Use complex character combinations to prevent neighbors from accessing your traffic without permission. The system allows you to select the encryption type; leave it as is. WPA2 PSK for maximum compatibility and security.
Particular attention should be paid to frequency settings. In the menu Setting up a WLAN access point You can select the range. For older devices, 2.4 GHz, but it's more loaded. If your gadgets support it 5 GHz, it's better to switch to it for speed.
Why change the frequency?
The 2.4 GHz band has a longer range, but is slower and subject to high noise levels from microwave ovens and neighboring routers. The 5 GHz band offers higher speeds but is less able to penetrate walls.
In this section, you can also configure the hotspot to automatically turn off if no one is connected for a certain period of time (e.g., 10 minutes). This is a useful feature for saving battery life.
Managing connected devices and traffic
In the access point menu Honor 8 there is a function Device managementThis displays a list of all devices currently using your internet connection. You can see their MAC addresses and the amount of data transferred.
The system allows you to manually block unknown devices. If you notice a suspicious connection, simply click on it and select the block option. This will immediately terminate the connection for the selected client.
You can also configure a traffic limit. You can set a threshold, after which internet tethering will automatically stop. This will protect you from unexpected charges if you don't have an unlimited plan.
| Parameter | Recommended value | Impact on work |
|---|---|---|
| Frequency range | 5 GHz (if supported) | High speed, less interference |
| Max. number of devices | 4-6 pieces | Optimal speed for everyone |
| Wi-Fi timeout | 10 minutes | Saving battery life when idle |
| Encryption | WPA2 PSK | Data security |
⚠️ Note: The menu interface may differ slightly depending on the firmware version EMUI (8.0, 9.0, or 10). Look for similar item names if there is no exact match.
Optimize performance and save battery life
Distribution mode Wi-Fi is one of the most power-hungry processes in a smartphone. The radio module operates at full power, constantly transmitting and receiving data packets. To minimize the impact on battery life, follow a few rules.
First, reduce screen brightness or turn off the display completely if monitoring is not required. Second, close background apps that may be consuming bandwidth or CPU resources. Third, turn off Bluetooth and GPS if they are not in use.
Some users recommend enabling power saving mode, but this should be done with caution. Aggressive power saving can lead to unstable access point operation or connection drops. It's best to configure the access point's settings as described above.
Solving common connection problems
Sometimes users encounter a situation where the hotspot is enabled, but other devices don't see the network or can't connect. First, try restarting your smartphone. This clears the network service cache and resolves possible software errors.
If the problem persists, check your APN settings. Go to Settings -> Mobile network -> Access Point Names (APNs)Make sure your carrier's access point is selected and active. You can try resetting your APN settings to factory defaults.
Another common cause is a full list of connected devices or an IP address conflict. Try changing the network password, which will forcefully terminate all current connections, and then reconnect the devices.
Why doesn't the Honor 8 share Wi-Fi with my laptop?
Most often, the problem stems from incompatibility of security protocols or frequencies. Try changing the frequency band from 5 GHz to 2.4 GHz in the access point settings. Also, check if your laptop's MAC address is blocked in the list of allowed devices.
How many devices can Honor 8 work simultaneously?
Technically Honor 8 Supports up to 8 connected clients. However, for stable speeds, it's recommended to limit the number of devices to 4-5. With more devices, internet speed on each device will drop significantly.
Does Wi-Fi sharing affect the speed of mobile internet on the phone itself?
Yes, it does. The communication channel is split between data transfer for the phone's screen and data transfer for external devices. Additionally, the processor and modem experience increased load, which can cause slight delays in games or video calls.