How to Share Internet from an Honor 9 to a Laptop: 3 Proven Methods + Troubleshooting

Smartphone Honor 9 — one of those devices that remains relevant even years after its release thanks to its stable operation and flexible settings. If you urgently need to share internet from your phone to your laptop—for example, on a business trip, at the dacha, or when your main provider is down—this guide will help you do it in 2-3 minutes. We'll cover all possible methods, from the classic Wi-Fi hotspots to alternative methods through USB cable And BluetoothWe'll also look at typical errors that can interfere with a stable connection.

It is important to understand that Honor 9 works on the base Android 7.0 (EMUI 5.1) or newer firmware versions, and the interface may differ slightly depending on the updates. However, the basic setup principles remain the same. If your laptop doesn't detect the shared network or connects but the internet isn't working, this article has a separate section with solutions for these issues, including settings. IPv4 and network adapter drivers.

Before you begin, check two key points:

• 📶 Mobile Internet It's turned on and working on the phone (try opening the website in a browser).
• 🔋 Battery charge above 20% - Wi-Fi distribution actively consumes energy, and the phone may turn off at the most inopportune moment.

1. Sharing Wi-Fi via an access point (the most popular method)

This is the standard method used by most users. It allows you to connect not only your laptop to the internet, but also other devices—tablets, a second phone, or even Smart TVThe data transfer speed will be limited only by the capabilities of your mobile plan (3G/4G) and network coverage.

To activate the hotspot on Honor 9:

1. Open Settings (gear icon on the home screen or in the application menu).
2. Go to the section Wireless Networks → Modem and Access Point (in some firmware the path may look like this Advanced → Modem Mode).
3. Select an item Wi-Fi hotspot.
4. Activate the slider at the top of the screen.

Once enabled, you will see the network name (SSID) and password. They can be changed by clicking on Setting up an access pointWe recommend:

• 🔐 Set a password of at least 8 characters using letters and numbers (e.g. Honor9_2026WiFi).
• 📡 Select a security standard WPA2 PSK - it provides better protection than the outdated one WEP.
• 🔄 Change network name (SSID), so as not to confuse it with other devices (for example, Honor9_MyHotspot).

Mobile Internet is enabled on the phone|

The access point is activated and visible in the list of networks on the laptop|

The password is entered correctly (case sensitive!)|

The VPN or proxy is disabled on the laptop (they may block the connection)

-->

If your laptop connects to the access point, but the internet doesn't work, check the APN settings on your phone. Sometimes operators (for example, Tele2 or Iota) require manual entry of access parameters. More details on this can be found in the section on troubleshooting.

2. Connecting via USB cable (the most stable method)

Sharing the internet via USB has two key advantages: firstly, it charges your phone, and secondly, the connection is less susceptible to interference than Wi-Fi. This method is ideal if you need to work on your laptop for long periods without the risk of sudden connection loss. However, this will require an original or high-quality adapter. USB cable with data transfer support (not all charging cables are suitable!).

Setup instructions:

1. Connect Honor 9 to your laptop using a USB cable. On your phone, select the mode File Transfer (MTP) or USB modem (a notification will appear after connection).
2. On your phone, go to Settings → Tethering & portable hotspot → USB tethering and activate the slider.
3. On your laptop, wait for the drivers to be installed (usually they are installed automatically after Windows Update).
4. Check your connection: a network connection icon with the inscription should appear in the laptop tray. Ethernet or Local Area Network Connection.

USB transfer speeds are generally faster than Wi-Fi, especially if you're using USB 2.0 or USB 3.0However, keep in mind that with this connection, the phone's battery will drain more slowly, but it is still recommended to keep it charging.

⚠️ Attention: Some antiviruses (for example, Kaspersky or Avast) may block the USB connection as a "suspicious device." In this case, temporarily disable protection or add your phone to the exceptions list.

3. Sharing the Internet via Bluetooth (an alternative for older laptops)

This method is less popular because the data transfer rate through Bluetooth limited (usually no more than 2-3 Mbps), but it can be a lifesaver if your laptop's Wi-Fi adapter breaks and you don't have a USB cable handy. Furthermore, Bluetooth connectivity uses less battery powerthan a Wi-Fi hotspot.

To configure:

1. Turn on Bluetooth on the phone and laptop. On Honor 9 This is done through the quick settings panel (swipe down from top) or in Settings → Bluetooth.
2. Make a phone visible to other devices (the option is usually found in the Bluetooth settings).
3. Find it on your laptop Honor 9 in the list of available devices and pair them. You will be asked to enter a confirmation code (usually 0000 or 1234).
4. On your phone, go back to Settings → Tethering & portable hotspot and activate Bluetooth modem.

After this, a new network connection should appear on your laptop. If the internet doesn't automatically work:

• 🖥️ Go to Control Panel → Network Connections (Windows).
• 🔄 Find the Bluetooth connection, right-click and select Properties → IPv4 Protocol.
• 📋 Check the boxes Obtain an IP address automatically And Obtain DNS server address automatically.

⚠️ Attention: On laptops with Windows 7 or older, you may need to manually install the drivers for your Bluetooth modem. Download them from the laptop manufacturer's website (e.g., Dell, HP, Lenovo).

4. Comparison table of Internet distribution methods

To choose the best method, review the key features of each option:

As can be seen from the table, USB connection — the best choice for stable operation, and Wi-Fi convenient if you need to connect several devices at the same time. Bluetooth should only be used in extreme cases.

Wi-Fi hotspot|

USB modem|

Bluetooth|

I don't use phone sharing.

-->

5. Common mistakes and their solutions

Even with proper setup, problems can still arise. Here are the most common ones and how to fix them:

🔴 My laptop can't see my Wi-Fi hotspot

• 📵 Check if it is enabled network visibility on the phone (there is an option in the access point settings Hide network - it should be disabled).
• 🔄 Restart your phone and laptop - sometimes this helps clear temporary glitches.
• 🖧 Update the Wi-Fi adapter driver on your laptop (especially important for Windows 10/11).

🔴 There is a connection, but the internet is not working

This problem is often related to settings. APN (operator access points). To check them:

1. On your phone, go to Settings → Wireless & networks → Mobile networks → Access point names (APNs).
2. Select your carrier's APN (e.g. internet.beeline.ru For Beeline or internet.mts.ru For MTS).
3. If the APN is missing, create a new one manually using the parameters from your operator's website.

APN settings for popular operators (2026)

MTS:

Name: MTS Internet

APN: internet.mts.ru

Proxy: not specified

Port: not specified

Username: mts

Password: mts

Authentication type: PAP

Beeline:

Name: Beeline Internet

APN: internet.beeline.ru

Leave the remaining fields blank.

Megaphone:

Name: Megafon Internet

APN: internet

Proxy: not specified

Port: not specified

Username: gdata

Password: gdata

🔴 "IP Conflict" or "Limited Connection" Error

This error occurs when the laptop is unable to obtain the correct IP address from the phone. Solution:

• 🖥️ On your laptop, open Command line (Win + R → cmd) and enter:

  ipconfig /release
  ipconfig /renew

• 🔄 If that doesn't help, manually set a static IP:
  1. Go to Network Connections → Your Network Properties → IPv4.
  2. Install: IP address: 192.168.43.100
Subnet mask: 255.255.255.0
Default gateway: 192.168.43.1
DNS: 8.8.8.8 (or 1.1.1.1).

⚠️ Attention: If you use Windows 11, after manually setting the IP, you may need to disable the function Random Hardware Addresses (Random hardware addresses) in the Wi-Fi adapter properties.

6. How to save traffic when sharing the Internet

Mobile data is often limited, especially if you don't have an unlimited plan. To avoid unexpected charges, follow these tips:

• 📊 Turn off automatic updates on the laptop:
  • IN Windows: Settings → Update & Security → Advanced options → Pause updates for 7 days.
  • IN macOS: System Preferences → Software Update → Update Automatically (uncheck).
• 🎵 Limit background apps:
  • Close Torrent clients, Steam, OneDrive/Google Drive - They can download gigabytes of data without being noticed.
  • In your browser, disable video autoplay (in Chrome: Settings → Privacy → Content Settings → Autoplay).
• 📱 Turn on your phone traffic saving:
  • Go to Settings → Wireless & networks → Data usage → Data saver.
  • Activate the option and add only critical applications to the exceptions (for example, WhatsApp or Telegram).

If you need to download a large file but have little traffic, use night time — Many operators provide bonus gigabytes from midnight to 7:00 a.m. You can also connect to public Wi-Fi networks (for example, in a cafe or shopping center) and share the internet from your laptop to your phone via reverse modem (if permitted by network rules).

7. Security when sharing Wi-Fi from your phone

A public hotspot is a potential vulnerability for your data. If you're sharing internet in a crowded place (such as an airport or coworking space), follow these rules:

• 🔒 Always use a complex password (at least 12 characters, with letters, numbers, and special characters). Avoid simple combinations like 12345678 or qwerty.
• 🛡️ Disable the access point, when it's not needed. Even if no one has connected to it, an open network can be discovered by attackers.
• 🌐 Use a VPN On your laptop, if you're transmitting sensitive data (for example, logging into online banking). This encrypts your traffic and protects it from interception.
• 📱 Limit the number of connected devicesIn the access point settings Honor 9 You can set a limit (usually up to 8 devices).

If you notice any suspicious activity (for example, unknown devices in the list of connected devices or a sharp increase in traffic consumption), immediately:

1. Turn off the access point.
2. Change your password.
3. Check your phone for viruses using Dr.Web or Malwarebytes.

⚠️ Attention: Some viruses for Android They can create hidden access points and send spam or mine cryptocurrency using your traffic. Install a reliable antivirus and scan your device regularly.

8. Frequently Asked Questions (FAQ)

❓ Why does my phone get so hot when using Wi-Fi?
Sharing the internet puts a strain on the processor and communication module, which leads to overheating. To reduce the temperature:
• Remove the case from your phone.
• Close all background applications.
• Place the phone on a flat surface (not on soft surfaces that block ventilation).
• If the temperature exceeds 50°C, turn off the access point for 10-15 minutes.
❓ Is it possible to share Wi-Fi from a phone if the phone itself is connected to another Wi-Fi network?

Yes, but it depends on the firmware. Honor 9 With EMUI 5.1 and newer this function is called Wi-Fi Bridge (Wi-Fi bridge). To activate it:

1. Connect your phone to the main Wi-Fi network.
2. Go to Settings → Wireless & networks → Wi-Fi → Advanced → Wi-Fi Bridge.
3. Enable the option and set up the access point as usual.

Please note: the speed in this case will be lower than with a direct connection to the mobile network.

❓ How many devices can I connect to the Honor 9 hotspot?

Technically, up to 8-10 devices are supported, but in practice, stable operation is ensured with 3-4 connections. Each additional device shares the bandwidth, which reduces the speed for everyone. If high speed is required (for example, for video conferencing), connect only one laptop.

❓ Why did the access point stop working after updating the firmware?

Sometimes updates reset APN settings or block internet tethering. Try:

• Reset network settings: Settings → System → Reset → Reset network settings.
• Manually add your operator's APN (instructions in the section on errors).
• Check if the mode is enabled Saving traffic - He can block the distribution.

If all else fails, rolling back to a previous firmware version may solve the problem, but this is risky and requires unlocking the bootloader.

❓ Is it possible to share internet from an Honor 9 to an iPhone or MacBook?

Yes, the connection process is no different from Windows-devices. On MacBook:

1. Click on the Wi-Fi icon in the top bar.
2. Select the network being distributed Honor 9.
3. Enter your password.

On iPhone or iPad the path is the same: Settings → Wi-Fi, then select the network and enter the password. If the connection fails, check if it is blocked Apple connection due to privacy settings (in iOS 17+ You may be asked to confirm your connection to an "unsecured network").