How to Share Internet from the Honor 7: 3 Ways to Create a Hotspot

Smartphone Honor 7 (model PLK-L01/AL00/AL10/TL00) still remains a popular device thanks to its reliable hardware platform and support for modern features, including Internet sharing. However, the interface EMUI (Huawei's shell) on this model has some quirks that may confuse inexperienced users. Unlike newer smartphones, where the "Access Point" option is located on the main settings screen, Honor 7 the path to it is hidden deeper, and some parameters (for example, the Wi-Fi frequency range) require manual configuration.

This article doesn't just duplicate the standard instructions - it covers all possible ways of distributing the Internet Taking into account the pitfalls of this model: from mobile operator restrictions to problems connecting older devices. You'll learn how to set up a hotspot via Wi-Fi, Bluetooth, and even USB, as well as what to do if your smartphone isn't sharing the internet or devices aren't seeing the network. Particular attention is paid to a unique problem with the Honor 7 with automatic deactivation of the access point when the screen is locked — and ways to bypass it.

Preparing your phone: checking key parameters

Before turning on the access point, make sure that your Honor 7 Ready to share your internet connection. Skipping these steps often results in errors like "Unable to enable access point" or no network connection on connected devices.

First, check availability of mobile InternetEven if your phone displays 3G/4G icons, this doesn't guarantee a stable connection. Open your browser and try opening any page—for example, speedtest.netIf the page doesn't load, the problem may be:

• 📵 Lack of coverage — move closer to the window or go outside.
• 💳 Insufficient funds in the account or blocking of the service by the operator.
• ⚙️ Incorrect APN settings — more about this in the next section.

Secondly, make sure that on your phone data transfer mode is enabledOn . Honor 7 This can be done through the notification panel (swipe down from the top edge of the screen) or in the settings along the way Settings → Wireless & networks → Mobile networks → Data usagePlease note: If you have a SIM card with a "calls only" plan, you won't be able to use data sharing—your operator blocks this feature at the network level.

⚠️ Attention: On some firmware versions Honor 7 (especially custom ones) the access point option can be disabled in the file build.propIf you don't find this option in the settings, you may need to manually edit the system files—but that's a topic for a separate article.

Finally, check battery chargeWi-Fi sharing consumes a significant amount of power—if the battery level drops below 20%, the phone may automatically turn off the hotspot. It is recommended to turn it on Honor 7 to a charger or power bank if you plan to distribute the Internet for a long time.

Setting up an APN: Why an access point may not work without it

One of the most common reasons why Honor 7 does not distribute the Internet - incorrect APN settings (Access Point Name). This is especially relevant if you recently changed carriers, updated the firmware, or reset your phone to factory settings. Even if mobile internet is working on your smartphone, special parameters may be required for tethering.

To check or change your APN:

1. Go to Settings → Wireless & networks → Mobile networks → Access point names (APNs).
2. If there are multiple profiles in the list, select the one that matches your operator (for example, internet.beeline.ru for Beeline).
3. Click on the profile and check the key fields:
   • Name: can be anything (for example, "My Internet").
   • APN: must match the official operator data.
   • Authentication type: usually PAP or CHAP.
   • APN type: must be specified default,supl or default,supl,mms.

Save the changes and restart your phone.

If your operator profile isn't listed, you can add it manually. Below is a table with current APN settings for popular Russian operators (data may vary by region):

⚠️ Attention: Some carriers (such as Yota or virtual operators like SberMobile) block internet tethering at the plan level. Check this information in your personal account or with support; otherwise, the hotspot will turn on, but devices won't be able to connect to the network.

After setting up the APN, try turning on the access point again. If the issue persists, proceed to the next section—it may be due to firmware limitations.

Method 1: Sharing Wi-Fi via an access point (the most popular method)

This is a standard method that is suitable for connecting laptops, tablets and other smartphones. Honor 7 The access point activation algorithm is slightly different on newer models, so please follow the instructions carefully.

Steps to set up:

1. Open Settings and go to the section Additionally (or More, depending on the EMUI version).
2. Select an item Modem mode (sometimes called Access point and modem).
3. Tap on Wi-Fi hotspot and move the slider to the "On" position.
4. Click Set up a Wi-Fi hotspotto ask:
   • Network name (SSID): Come up with a unique name (eg. Honor7_Hotspot).
   • Password: minimum 8 characters, preferably a combination of letters and numbers.
   • Security: select WPA2 PSK — this is the optimal balance between protection and compatibility.
   • Frequency range: If you are connecting older devices (before 2015), select 2.4 GHzFor modern gadgets you can leave it Auto.

Save your settings and return to the previous screen. The hotspot should activate automatically.

Now other devices will be able to find your network in the list of available Wi-Fi networks. However, there are a few nuances specific to Honor 7:

• 🔄 Automatic shutdownIf no device connects to the hotspot within 5 minutes, it will deactivate. To avoid this, connect at least one device immediately after turning it on.
• 🔋 OverheatWhen distributing Wi-Fi for extended periods, the phone may become hot. If the temperature exceeds 45°C, the access point will shut down until it cools down.
• 📶 Speed ​​Limit: the maximum distribution speed on this model is up to 30 Mbps (even if your tariff supports 100+ Mbps).

The network name (SSID) is displayed in the Wi-Fi list|The password is entered correctly|The device is within 5-10 meters of the phone|Mobile Internet is enabled on the phone-->

If the Internet does not work after connecting the device, check:

1. On your phone, the notification bar should show a "Wi-Fi hotspot is active" notification with the number of connected devices.
2. The connected device's network properties should display the status "Connected, Internet".
3. Try turning the hotspot on your phone off and on again.

What should I do if my devices connect but the internet doesn't work?

Most likely, the problem is with your IP settings. On the connecting device (e.g., a laptop), manually enter the following:

- IP address: 192.168.43.100

- Subnet mask: 255.255.255.0

- Default gateway: 192.168.43.1

- DNS: 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).

If this does not help, the problem may be with the operator blocking (see the section on APN).

Method 2: Sharing the Internet via Bluetooth (to save battery)

This method is less popular, but has its advantages: lower battery consumption and a more stable connection in interference-ridden environments (for example, in offices with numerous Wi-Fi networks). However, Bluetooth data transfer speeds are limited to ~3 Mbps, which is only sufficient for instant messaging or email.

To share the Internet via Bluetooth:

1. Turn on Bluetooth on both devices (on Honor 7 This is done through the notification panel or in Settings → Bluetooth).
2. On the phone that will be distributing the Internet, go to Settings → Advanced → Tethering.
3. Activate the option Bluetooth modem.
4. On the device you are connecting to (for example, a laptop), find Honor 7 in the list of available Bluetooth devices and pair them.
5. After pairing, a new connection with the name should appear in the "Network Connections" section on your laptop. Bluetooth network connection.

Features of this method:

• 🔗 Device restrictions: Only one device can be connected at a time.
• 📱 Compatibility: Not all laptops support internet access via Bluetooth (check the device manager for the "Bluetooth PAN" driver).
• 🔋 Energy consumption: Battery consumption is lower than with Wi-Fi, but the phone will still drain faster than in normal mode.

If the connection fails, try:

• Reboot both devices.
• Delete the pairing and start it again.
• Update Bluetooth drivers on your laptop (relevant for Windows).

⚠️ Attention: On some versions of EMUI for Honor 7 option Bluetooth modem may be absent. In this case, the only options are Wi-Fi or USB distribution.

Method 3: Sharing the Internet via USB (maximum stability)

Connecting via USB is the most reliable way to share the internet, especially if you need a stable connection for a laptop or PC. Advantages:

• 🔌 No battery drain — the phone charges during distribution.
• 📈 Higher speed compared to Bluetooth (up to 10-15 Mbps).
• 🔒 Security — physical connection, no risk of connecting third-party devices.

Setup instructions:

1. Connect Honor 7 to the computer via a USB cable (preferably the original one).
2. On your phone, select the connection mode in the notification panel File Transfer (MTP) or Charging only (in some cases the automatic mode does not work).
3. Go to Settings → Advanced → Tethering.
4. Activate the option USB modem.
5. A new network connection should be established automatically on your computer. If this does not happen, check your drivers (Windows may require installation HiSuite from Huawei).

Possible problems and solutions:

For users Linux Additional network configuration may be required. In the terminal, run:

sudo dhclient usb0

(Where usb0 — network interface name, may differ).

Solutions to common problems

Even after proper configuration, the access point Honor 7 may work unstably. Let's look at common errors and how to fix them.

1. The access point turns on, but devices don't connect.

Reasons and solutions:

• 🔐 Incorrect password: Make sure you enter it correctly (case is important!).
• 📡 Incompatibility of Wi-Fi standards: If you are connecting an old device (for example, iPhone 4 or a 2010 laptop), in the access point settings, select the mode 2.4 GHz only.
• 🔄 IP address conflict: Try manually setting the IP on the device you are connecting to (see spoiler in the Wi-Fi section).

2. The Internet works on the phone, but is not distributed.

This is one of the most difficult problems, as there may be several reasons:

• 📵 Blocking by operatorSome plans (especially unlimited plans) limit internet tethering. Check your plan's terms in your personal account.
• ⚙️ Incorrect APN settings: Go back to section 2 and set up the APN again.
• 🛡️ Firewall or VPN: Disable the VPN on your phone and check the firewall settings on the device you are connecting to.

3. The access point turns off by itself

On Honor 7 There are two reasons for automatic shutdown:

• 🔋 Energy savingIf the battery level drops below 15%, the hotspot will deactivate. Connect your phone to a charger.
• 🛑 Lock when going into sleep mode: in the developer settings (Settings → About phone → Build number - Tap 7 times to disable the option. Disable mobile internet in sleep mode.

If none of these methods help, try resetting the network settings on your phone: Settings → Advanced → Network resetThis will delete all saved Wi-Fi and Bluetooth devices, but it often solves sharing issues.

Distribution Optimization: How to Increase Speed ​​and Stability

Even if your access point is working, its performance can be improved. Here are some tips for Honor 7:

1. Selecting the optimal Wi-Fi channel

By default, the phone automatically selects the channel for broadcasting, but in urban areas this often leads to interference. To manually set the channel:

1. Install the application on your phone Wi-Fi Analyzer (available on Google Play).
2. See which channels (1 to 13) are the least loaded in your environment.
3. In the access point settings (Set up a Wi-Fi hotspot → Advanced) select a free channel (for example, 6 or 11).

2. Limiting connected devices

Honor 7 Supports up to 8 simultaneously connected devices, but in practice, speed drops by 2-3 times with just 3-4 devices. To limit the number of connections:

• In the access point settings, find the item Max. number of connected devices.
• Set the value to 2-3 if you don't need mass distribution.

3. Disable background activity

When sharing your internet connection, close all unnecessary apps on your phone—they consume bandwidth and processor resources. This is especially true for:

• 🎮 Games and streaming services (YouTube, Twitch).
• ☁️ Cloud services (Google Drive, Dropbox).
• 📱 Messengers with auto-updates (Telegram, VKontakte).

4. Using an external antenna (for advanced users)

If you need to boost your Wi-Fi signal, you can connect an external antenna via an OTG adapter. To do this, you'll need:

• OTG cable (supported) Honor 7).
• Wi-Fi adapter with support for the mode SoftAP (For example, TP-Link TL-WN722N).
• Application External Wi-Fi from Google Play.

This method requires root access and is only suitable for advanced users.

- Channel: 6 or 11 (less busy)

- Channel width: 20 MHz (increases stability)

- Max. devices: 3-4

- Power saving mode: disabled-->

FAQ: Answers to frequently asked questions

Is it possible to share Wi-Fi from Honor 7 without a password?

Technically yes, but it's extremely insecure. To remove the password, select the security type in the access point settings. Open networkHowever, in this case:

• Anyone within a 10-15 meter radius will be able to connect to your network.
• The operator may block the distribution due to suspicious activity.
• The speed will be lower due to possible interference from neighbors.

We recommend using at least a simple password (for example, 12345678).

Why does my phone get so hot when using Wi-Fi?

Heating is a normal phenomenon for Honor 7 When distributing internet for a long time. Reasons:

• CPU HiSilicon Kirin 935 not optimized for multitasking.
• The Wi-Fi module is located next to the battery.
• Active use of mobile Internet and Wi-Fi simultaneously.

To reduce heat:

• Remove the case from your phone.
• Place your phone on a flat surface (not on a soft cloth).
• Limit the number of connected devices to 2-3.
• If the temperature exceeds 45°C, take a break for 10-15 minutes.

How to share Wi-Fi from an Honor 7 to an iPhone or Mac?

The connection algorithm is no different from Android devices, but there are some nuances:

1. On Honor 7 Turn on the access point (see section 3).
2. On your iPhone/iPad/Mac, find the network in the Wi-Fi list and connect.
3. If the connection is not established:
   • Check that on Honor 7 security mode selected WPA2 PSK (iOS does not support WPA3 on older devices).
   • Make sure that the network name (SSID) does not contain Cyrillic or special characters.
   • On Mac, disable the firewall in System Preferences → Security & Privacy → Firewall.

If the internet doesn't work after connecting, try manually setting DNS on your iPhone: Settings → Wi-Fi → (i) next to the network → Configure DNS → Add server (specify 8.8.8.8).

How much traffic does Wi-Fi distribution consume?

Traffic consumption depends on the activity of connected devices:

• 📱 Messengers (WhatsApp, Telegram): ~50-100 MB/hour.
• 🌐 Surfing the Internet: ~100-300 MB/hour.
• 🎵 Music (Spotify, VKontakte): ~70-150 MB/hour.
• 🎬 Video (YouTube, 720p): ~500-700 MB/hour.
• 🎮 Online games: ~100-400 MB/hour (excluding downloading updates).

To control consumption:

• Use apps like My Data Manager.
• In your phone settings, enable the option Limit Exceeded Warning (Settings → Wireless & networks → Mobile networks → Data alert).
• Limit background data transfer in app settings.

Is it possible to share Wi-Fi from Honor 7 to Smart TV?

Yes, but there are limitations:

• 📺 Modern TV (2018+): connect without problems via standard Wi-Fi.
• 📺 Old TVs (before 2016):
  • May not support WPA2 - try installing WPA PSK in the access point settings.
  • Sometimes manual IP specification is required (see spoiler in the Wi-Fi section).
• 🎯 Recommendations:
  • Use the short network name (SSID) without spaces.
  • If the TV does not see the network, restart both the phone and the TV.
  • For stability, connect the TV via cable to the laptop, which in turn receives the Internet from Honor 7 via USB.