Smartphone Honor 10 Even years after its release, it remains a relevant device for distributing mobile Internet. Its processor HiSilicon Kirin 970 and support for modern Wi-Fi standards (802.11ac) allow you to reliably share traffic with laptops, tablets, and other gadgets. But how do you set up an access point correctly if you've never done so before? Or what if devices aren't connecting to the network you've created?
In this article, we will look at all the available methods of distributing the Internet with Honor 10: a classic Wi-Fi hotspot, a USB modem, and even a Bluetooth connection. We'll pay special attention to common errors, such as why a smartphone might suddenly disconnect from the hotspot or why connected devices can't access the network. You'll also learn how to save battery life during long-term data sharing and which carrier settings might be blocking the feature.
Important: Internet tethering capabilities depend not only on your phone model but also on your mobile carrier's plan. Some providers limit or completely block tethering—we'll discuss this below.
1. Preparing your phone for Wi-Fi sharing
Before turning on the access point, make sure that your Honor 10 I'm ready for this task. Here are the key points to check:
✅ Firmware update. Outdated version EMUI (Huawei shells) may contain errors in the Wi-Fi module. To check the software is up to date, go to Settings → System → Software UpdateIf a new version is available, install it.
✅ Battery chargeWi-Fi distribution actively consumes energy. When the battery level is below 20% Your smartphone may automatically disable the hotspot. We recommend connecting your phone to a charger or using power saving mode.
✅ Mobile InternetMake sure your phone's mobile data is enabled and working reliably. Check the network indicator in the top bar: if instead of 4G/LTE is displayed H+ or 3G, the distribution speed will be significantly lower.
Update firmware to the latest version
Charge the battery to 50% or more
Enable mobile Internet (4G/LTE)
Check your operator for restrictions-->
⚠️ Attention: If you use two SIM cards, the hotspot will only share data from the SIM card that is selected as the default data card. To change the priority, go to Settings → Wireless & networks → Mobile networks → Portable hotspot.
2. Setting up a Wi-Fi hotspot on the Honor 10
The most popular way to share the internet is to create a Wi-Fi network that can connect multiple devices simultaneously. Here's how:
1. Open Settings on the phone.
2. Go to the section Wireless Networks → Access Point and Modem.
3. Select the item Wi-Fi hotspot and activate the slider.
4. Click Setting up an access pointto set network parameters:
- Network name (SSID): Come up with a unique name (eg. Honor10_Hotspot).
- Protection: select WPA2 PSK (the safest option).
- Password: Set a complex password (at least 8 characters, with numbers and letters).
- Frequency range: if your Honor 10 supports 5 GHz, select this range for more stable operation.
⚠️ Attention: If unknown devices appear in the list of connected devices, change the access point password immediately. This may indicate an unauthorized connection attempt.
How to speed up Wi-Fi hotspots on the Honor 10
If the upload speed is too slow, try:
1. Switch from 2.4 GHz to 5 GHz band (if supported).
2. Reduce the number of connected devices (optimally no more than 5).
3. Disable background apps that consume traffic (for example, automatic app updates).
4. Restart your phone before turning on the hotspot.
Once configured, save the changes and enable the hotspot. Other devices will now be able to find your network in the list of available Wi-Fi networks and connect to it by entering the password you set.
3. Alternative methods of Internet distribution
Besides Wi-Fi, Honor 10 supports two more ways of distributing the Internet: via USB modem And BluetoothEach of them has its pros and cons.
Method 1: USB modem
This method is suitable for connecting laptops or PCs without Wi-Fi to the internet. Advantages:
- 🔋 Minimal battery consumption (the phone is charged via USB).
- 🚀 Higher speed compared to Wi-Fi.
- 🔒 Security (no risk of connecting foreign devices).
To activate USB modem:
- Connect your phone to your computer via USB cable.
- In your phone settings, go to
Wireless Networks → Access Point and Modem. - Activate the slider
USB modem. - Wait for the drivers to install on your computer (they are usually installed automatically).
⚠️ Attention: Some versions of Windows may require manual driver installation. Huawei HiSuiteDownload it from the manufacturer's official website.
Method 2: Bluetooth modem
This option is convenient for connecting devices that don't support Wi-Fi (for example, some smartwatches or older printers). However, the speed will be significantly slower than Wi-Fi or USB.
- 📱 Low power consumption (compared to Wi-Fi).
- 🔄 Automatic connection when Bluetooth is turned on.
- 🐢 Low speed (only suitable for light tasks, such as checking email).
To configure:
- Turn on Bluetooth on both devices.
- Pair them (enter the verification code if required).
- On your phone, go to
Settings → Wireless & networks → Hotspot & tethering → Bluetooth tethering. - Activate the function and confirm the connection on the second device.
Wi-Fi hotspot
USB modem
Bluetooth modem
I don't use distribution-->
4. Typical problems and their solutions
Even with proper configuration, users Honor 10 Sometimes we encounter difficulties when sharing internet. Let's look at the most common ones and how to resolve them.
| Problem | Possible cause | Solution |
|---|---|---|
| The access point turns on, but devices do not connect. | Incorrect password or operator restrictions | Check your password, restart your phone, contact your carrier. |
| There is a connection, but the Internet doesn't work. | No mobile data or operator blocking | Check your balance, turn on data, change your SIM card |
| The access point turns off spontaneously | Saving power or overheating your phone | Turn off power saving mode and let your phone cool down. |
| Low distribution speed | Weak network signal or channel congestion | Switch to 5 GHz, reduce the number of connected devices |
If none of the above worked, try resetting your network settings. To do this, go to Settings → System → Reset → Reset network settings. After the reset, all saved Wi-Fi networks and passwords will be deleted, so write down important data in advance.
5. How to save battery life when sharing Wi-Fi
Sharing your internet connection is one of the most energy-consuming features of a smartphone. To extend battery life Honor 10 from the battery, follow these tips:
🔋 Disable background appsClose all programs that may consume bandwidth or CPU resources. This especially applies to instant messaging apps, social media, and cloud services.
🌡️ Control the temperatureWhen using Wi-Fi for extended periods, your phone may overheat, causing the hotspot to automatically turn off. Use your phone in a well-ventilated area and avoid direct sunlight.
⚡ Activate power saving modeGo to . Settings → Battery → Power saving mode and select the option UltraThis will limit background activity and reduce screen brightness.
📶 Limit the number of connected devicesEach new device increases the load on the processor and Wi-Fi module. The optimal number is no more than 3-5 devices simultaneously.
If you plan to share your internet connection for an extended period, it's best to connect your phone to a power source. Use the original cable and adapter to avoid charging issues.
6. Operator Limitations: What You Need to Know
Many mobile operators impose restrictions on internet tethering, even if your plan includes unlimited data. Here's what users can expect Honor 10:
📵 Blocking the modem functionSome plans completely prohibit internet tethering. In this case, when you try to enable the hotspot, you'll see a notification: "The modem function has been disabled by your operator.".
📉 Speed LimitEven if data sharing is permitted, the operator may artificially reduce speeds after a certain traffic limit (for example, 10 GB per month) is exceeded.
💰 Additional feeSome plans charge extra for internet tethering. The cost can reach 50-100 rubles per day.
To avoid unpleasant surprises, check your plan's terms and conditions in advance. You can do this:
- 📞 By calling the operator's support service.
- 🌐 By logging into your personal account on the official website.
- 📱 By sending a USSD request (for example,
*100#for Beeline or*111#for MTS).
7. Security when sharing Wi-Fi from your phone
An open access point is a potential threat to your data. Attackers can connect to your network and intercept your traffic. To prevent this, follow these security guidelines:
🔐 Use a complex password. Don't set simple combinations like 12345678 or qwertyAn optimal password should contain:
- 🔢 Numbers and letters of different registers.
- 🔤 Symbols (eg.
!,@,#). - 📏 Length must be at least 10 characters.
👥 Restrict access. In the access point settings (Settings → Hotspot & tethering → Wi-Fi hotspot → Connected devices) You can see a list of devices connected to your network. If any of them are unknown, change the password immediately.
🛡️ Turn off the hotspot when it is not neededEven if you're not sharing, a powered-on access point remains vulnerable to attack. Always power it off after use.
🌐 Use VPN on connected devicesIf you're sharing internet in a public place, we recommend enabling a VPN on your laptop or tablet. This will protect your data from possible interception.
⚠️ Attention: If you notice suspicious activity on your devices after connecting to your hotspot (such as pop-ups or redirects to unknown websites), immediately disable the hotspot and scan your phone for viruses.
FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 10
Is it possible to share Wi-Fi from the Honor 10 if the phone does not have a SIM card?
No, to share mobile data, you must have a SIM card with an active data plan. However, you can share your data by connecting to another Wi-Fi network (such as your home router) and activating the feature. Modem mode in the settings.
How many devices can be connected to the Honor 10 hotspot at the same time?
Theoretically, up to 10 devices can be connected, but in practice, stable operation is ensured with no more than 3-5 devices connected. Each additional device increases the processor load and may lead to reduced speed or connection interruptions.
Why does the battery drain quickly when distributing Wi-Fi?
Tethering uses several power-hungry parts of your phone: the processor, Wi-Fi, and mobile network. To reduce battery drain, disable background apps, reduce screen brightness, and plug your phone into a charger if you plan to use it for extended periods.
Is it possible to change the frequency band (2.4GHz or 5GHz) on Honor 10?
Yes, if yours Honor 10 supports range 5 GHzTo do this, go to Settings → Hotspot & tethering → Wi-Fi hotspot → Set up hotspot and select the desired range in the section "Frequency range"Please note that not all devices support 5 GHz network connection.
What should I do if my operator has blocked internet access?
There are several options:
- 📞 Contact your operator and clarify the unlocking conditions (sometimes this is a paid option).
- 🔄 Change your plan to one that supports internet tethering.
- 📶 Use alternative methods (for example, connect to another Wi-Fi network and share it).