Sharing Wi-Fi from the Honor 10i to Another Phone: A Complete Guide with the Nuances

Transform Honor 10i into a full-fledged hotspot is easier than it seems. This smartphone is based on Android 9 Pie (upgradeable to Magic UI 4.0) supports all modern Internet distribution protocols: from the classic Wi-Fi Hotspot to Bluetooth bridge and even USB terminalBut many users encounter common problems: the phone doesn't detect the shared network, the speed drops to zero after 5 minutes, or connected devices receive the "No Internet Access" error.

In this article - step-by-step instructions for all distribution methods, including hidden settings Honor 10i, which the manufacturer does not advertise. We will cover not only the basic steps, but also Solution to 90% of common mistakes, related to operator restrictions, power saving settings, and IP address conflicts. If you've tried tethering before and it didn't work, here's the answer to why.

We will pay special attention to three key points, which even experienced users ignore:

1. How to bypass data sharing blocking from mobile operators (MTS, Beeline, Tele2, Megafon).
2. Why Honor 10i The hotspot automatically turns off after 10 minutes and how to fix it.
3. A hidden Wi-Fi channel setting that increases distribution speed by 40%.

1. Preparing your phone: checking compatibility and making preliminary settings

Before you enable tethering, make sure your Honor 10i Ready to share your internet. Let's start with the basic requirements:

Smartphone requirements:

• 📱 Android version: not lower than 9.0 (on Honor 10i It's right out of the box Magic UI 2.1 based on Android 9 Pie). If you have an older firmware, update it via Settings → System → Software Update.
• 📶 Mobile network: An active SIM card with a data plan. Check with your carrier to make sure they don't block tethering (more on that below).
• 🔋 Battery charge: minimum 20%. If the level is below 15%, the system may automatically disable the access point.

Now check mobile internet settings:

1. Open Settings → Wireless & networks → Mobile networks.
2. Make sure the switch is on Mobile data active.
3. Go to Access Point Names (APNs) and select your operator's profile. If it's not there, add it manually (APN parameters can be found on the operator's website).

An important nuance: on Honor 10i there is a hidden option Modem mode, which is disabled by default. To activate it:

Settings → System → Developer Options → Tethering (enable)

⚠️ Attention: If you don't see the "Developer Mode" option, enable it first: Settings → About phone → Build number (press 7 times in a row).

2. Method 1: Sharing Wi-Fi via a Hotspot

This is the most popular and versatile method. It allows you to connect up to 10 devices simultaneously (in practice - 3-4 without loss of speed).

Step-by-step instructions:

1. Open Settings → Wireless & networks → Hotspot (or Modem and access point depending on the firmware version).
2. Activate the switch Portable Wi-Fi hotspot.
3. Click Setting up an access point and ask:
   • 🔐 Network Name (SSID): any (for example, Honor10i_Hotspot).
   • 🔒 Security type: select WPA2 PSK (the most reliable).
   • 🔑 Password: minimum 8 characters (use numbers and letters).

Save the settings and enable the access point.

Now on the second phone:

1. Open the list of available Wi-Fi networks.
2. Select the name of your access point (Honor10i_Hotspot).
3. Enter the password and connect.

The network has appeared in the list of available Wi-Fi networks|The device has connected without errors|The Internet is working (check with a browser)|The speed is stable (run a speed test)-->

Problems and solutions:

3. Method 2: Sharing the Internet via Bluetooth

This method is less popular, but is useful in two cases:

1. When the Wi-Fi on the receiving device is not working.
2. When the operator blocks Wi-Fi distribution, but allows it via Bluetooth.

How to set up:

1. On Honor 10i open Settings → Devices → Bluetooth and turn it on.
2. On the second phone, also activate Bluetooth and pair it with Honor 10i.
3. Return to Settings → Wireless & networks → Hotspot.
4. Activate the option Bluetooth modem.

On the second phone:

1. Open Settings → Connections → Bluetooth.
2. Find yours Honor 10i in the list of paired devices.
3. Click on it and select Connect to access the Internet.

Limitations of the method:

• ⚠️ Speed ​​limited 1-2 Mbps (enough for instant messengers, but not for video).
• ⚠️ Only works with Android/iOS devices that support the profile PAN (Personal Area Network).
• ⚠️ Quickly drains the battery of both phones.
How to check if your phone supports Bluetooth tethering?

Open Settings → About phone → Bluetooth versionIf version 4.0 or higher, the feature should work. On iPhone, check in Settings → Bluetooth → (i) next to the device — there should be an option "Connect to the network".

4. Method 3: Sharing via USB cable (Reverse Tethering)

The most stable, but least known method. Suitable for:

• 🔌 Connecting your phone to a PC or laptop.
• 📱 Charging the receiving phone during distribution.
• 🚀 Maximum speed (limited only by USB 2.0) - up to 480 Mbps).

What you will need:

• Cable USB Type-C — USB Type-C (or a Micro-USB adapter if the second phone has a different connector).
• Enabled mode USB debugging on both devices.

Instructions:

1. On Honor 10i turn on USB debugging (Settings → System → Developer Options).
2. Connect your phone to the second device using a cable.
3. On Honor 10i open Settings → Wireless & networks → Hotspot.
4. Activate USB modem.

On the second phone:

1. Confirm trust for the connected device (a prompt will appear).
2. Turn on Transferring data via USB in the notification curtain.
3. If the Internet does not work automatically, go to Settings → Network & Internet → Advanced → USB Internet and activate it.

⚠️ Attention: Some manufacturers (such as Xiaomi) block USB internet by default. In this case, you'll need to manually edit the file. build.prop or using Magisk modules. Honor 10i There are no such restrictions.

5. Troubleshooting distribution issues: operator blocking and connection errors

If you've set everything up correctly but the internet isn't working, 80% of the time it's your mobile operator's fault. Many plans (especially unlimited ones) artificially limit data sharing.

How to bypass the block:

• 🔄 Changing APN: Go to Settings → Mobile network → Access point names (APN) and create a new profile with the following parameters:

  Name: Internet
  APN: internet.mts.ru (for MTS), internet.beeline.ru (for Beeline), etc.
  APN type: default, dun
  Protocol: IPv4/IPv6

  Note: For Tele2 and Megafon use internet.tele2.ru And internet respectively.
• 🛡️ VPN: Install an app like 1.1.1.1 or ProtonVPN and connect to a server in your country. This will mask the distribution traffic.
• 📱 Airplane mode: Turn it on for 30 seconds, then turn it off and try sharing the Internet again.

Common mistakes and how to fix them:

6. Distribution Optimization: How to Increase Speed ​​and Stability

Even if the internet is available, its speed may be far from ideal. 5 proven methods improve connection:

Settings on Honor 10i:

• 📶 Changing Wi-Fi band: In the access point settings, select 5 GHz only, if both devices support this standard. Speed ​​will increase by 30-50%, but the range will decrease.
• 🔄 Wi-Fi channel: Set the channel manually 36, 40, 44 or 48 (they are less busy).
• 🔋 Disabling power saving: Go to Settings → Battery → Performance mode and select Maximum performance.

Settings on the receiving device:

• 📱 Disabling automatic Wi-Fi switching: On Android: Settings → Wi-Fi → Advanced → Auto-connect (disable).
• 🔍 Fixed DNS: Specify DNS in your Wi-Fi network settings 1.1.1.1 or 8.8.8.8.

Hardware tips:

• 📴 Phone placement: Do not place Honor 10i Place the devices in a metal case—this shields the signal. The optimal distance between devices is up to 5 meters.
• 🔌 Nutrition: Connect Honor 10i Charging while sharing. When the battery level drops below 30%, the phone may begin to conserve power by reducing the transmit power.

7. Alternative distribution methods for advanced users

If the standard methods don't work or you need more advanced features, try these methods. They require additional steps, but they give you more control.

Method 1: Distribution via NetShare (without root)

• Install the application NetShare from Google Play.
• Select mode Wi-Fi Hotspot and follow the instructions.
• The application bypasses some operator blockings using a VPN tunnel.

Method 2: Distribution via ClockWorkMod Tether (requires root)

• Install ClockWorkMod Tether and grant root access.
• The application creates an access point at the Android kernel level, making it invisible to the operator.
• Works even on tariffs with explicit blocking of distribution.

Method 3: Distribution via ADB (for PC)

1. Connect Honor 10i to PC via USB with debugging enabled.
2. Open command prompt and run:

   adb shell settings put global tether_dun_required 0

3. Restart your phone and turn on the hotspot.

⚠️ Attention: Using root apps and ADB commands may void your warranty and cause your phone to malfunction. Back up your data before experimenting.

FAQ: Answers to frequently asked questions

Is it possible to share Wi-Fi with Honor 10iif I have an unlimited tariff?

Yes, but many operators limit upload speeds on unlimited plans. For example, MTS and Beeline may reduce speeds to 64 kbps after 10 GB of uploaded data. To bypass this, use a VPN or change your APN (see section 5).

Why is the access point on Honor 10i turns off by itself after 10 minutes?

This is related to the power saving settings. Open Settings → Battery → Battery Mode and select High performanceAlso add the "Access Point" app to the optimization exceptions.

How to share internet with Honor 10i on iPhone?

iPhone doesn't support connecting to Android hotspots via USB. Use Wi-Fi or Bluetooth:

1. On Honor 10i Turn on the access point (see section 2).
2. On iPhone, open Settings → Wi-Fi and connect to the network.
3. If an error occurs, restart both devices.

Is it possible to share the internet with Honor 10i on multiple devices at the same time?

Yes, up to 10 devices, but in practice, it's recommended to connect no more than 3-4 to avoid speed drops. For stable operation of multiple devices:

• Use the 5 GHz band (if supported).
• Disable background updates on connected devices.

How to reset access point settings on Honor 10i to factory?

Open Settings → System → Reset → Reset network settingsThis will delete all saved Wi-Fi networks and hotspot settings. After the reset, the phone will reboot.