Sharing Wi-Fi from an Honor phone to another Android: A complete guide with all the details

Modern smartphones Honor (formerly part of the ecosystem Huawei) allow you to share mobile Internet via Wi-Fi with other devices - this function is called modem mode or access pointIt is most often needed when there is no router at hand, and a second phone (for example, a tablet or laptop) requires a network connection. However, users Honor Difficulties often arise: the access point does not turn on, the second Android gadget does not connect, or the speed is too low.

In this article we will look at All methods of distributing Wi-Fi from phones Honor (including models on EMUI And Magic UI), we'll explain why errors can occur and provide a checklist for troubleshooting common problems. We'll also reveal hidden settings, which will help speed up your connection and save traffic.

If you tried to share the Internet with Honor 70/90/100 or an older model (Honor 8X, 9 Lite, 10i), but nothing worked for you - don't rush to blame the smartphone. In 80% of cases, the problem lies in incorrect APN settings, operator restrictions, or IP address conflicts. We'll show you how to check and fix them.

Important: Access point functionality depends on firmware versions (EMUI 12/13/14 or Magic UI 7/8), phone model and even the region of purchase. For example, on some Honor For Europe, the option is disabled by default Wi-Fi Direct, which may interfere with the connection.

1. Preparing your Honor phone for Wi-Fi sharing

Before turning on the access point, make sure that your Honor ready for this. Here mandatory conditions:

✅ Mobile Internet must be active (icon 4G/5G or H+ in the status bar). If you only have E (Edge), the speed will be extremely low.

✅ SIM card must support data transfer. On some plans, operators block Wi-Fi hotspots (especially on unlimited plans).

✅ Battery charge — at least 30%. If the level is low, the system may automatically disable the access point.

✅ Software updatesOn older versions EMUI (below 10.0) key settings may be missing.

How can I check my Wi-Fi hotspot plan?

1. Open your operator's application (for example, "My MTS", "Tele2", "Beeline").
2. Go to the "Tariff" or "Services" section.
3. Look for mentions of "tethering," "access point," or "tethering."

⚠️ Attention: On "unlimited" internet plans, Wi-Fi sharing is often limited to 5-10 GB per month. Exceeding this limit results in blocking or speed reduction to 64 kbps.

If you have Honor If you have two SIM cards, select the one with activated mobile internet. To do this:

1. Go to Settings → Wireless & networks → Mobile networks.
2. Tap Access Point Name (APN) and make sure that the parameters meet the operator's requirements.

2. Step-by-step instructions: how to enable hotspot on Honor

The algorithm for activating modem mode is the same for most models. Honor, but may vary slightly depending on the shell version. We'll show you a universal method:

📱 Step 1. Open Settings (gear icon on the home screen or in the application menu).

🔄 Step 2. Go to the section Wireless networks (or Connections on Magic UI 7+).

🌐 Step 3. Select an item Access point and modem (on some models - Modem mode).

☑️ Step 4. Activate the switch Wi-Fi hotspot.

After this, a notification about the modem mode being turned on will appear on the screen, and an icon will appear in the status bar. 📶 with rays.

Setting up username and password:

• 🔑 Click on Setting up a Wi-Fi hotspot.
• 📝 In the field Network name Enter a unique name (eg. Honor_Hotspot_123).
• 🔒 In the field Password Please enter a combination of at least 8 characters (we recommend using numbers and letters).
• 📡 In the section Security select WPA2 PSK (the most reliable option).

By default Honor uses range 2.4 GHz, which passes through walls better, but is susceptible to interference. If the speed is low, try switching to 5 GHz (not available on all models).

The network name (SSID) is visible in the Wi-Fi list|The password is entered correctly|Mobile Internet is active on the Honor|Airplane mode is disabled on the second phone-->

3. Connecting a second Android phone to the Honor hotspot

Now you need to connect the second smartphone to the newly created network. Here's how to do it correctly:

🔍 Step 1. On the second phone, open Settings → Wi-Fi.

📡 Step 2. In the list of available networks, find the name of your access point (the one you specified in the settings Honor).

🔑 Step 3. Click on it and enter the password.

✅ Step 4. Wait for the connection (icon Wi-Fi should appear in the status bar).

If the connection does not occur, check:

• 🔄 Restart both phones.
• 📱 On Honor Turn the access point off and on again.
• 🔒 Make sure the password is entered without spaces and in the correct case.
• 🚫 On the second phone, disable the VPN or proxy (they may block the connection).

What should I do if the second phone connects, but the internet doesn't work?

1. Check your SIM card balance on Honor (sometimes the operator blocks traffic when the account balance is zero).
2. Make sure that on Honor included Mobile Internet (indicator 4G/5G in the status bar).
3. Go to Settings → Mobile network → Access point names (APN) and select your operator profile.

⚠️ Attention: On some models Honor (For example, Honor 8A) after updating to EMUI 12 The ability to change the Wi-Fi band (2.4/5 GHz) is lost. This is a firmware limitation and can only be fixed by downgrading to an older version.

4. Speed ​​optimization and traffic saving

By default Honor limits upload speed to save battery life. But if you need maximum performance, try these tips:

⚡ Speed ​​increase:

• 📶 Switch to 5 GHz (if supported). To do this, select in the access point settings Band: 5 GHz.
• 🔄 Turn off background sync on the second phone (Settings → Accounts → Sync).
• 🎯 Turn on the mode Maximum performance in battery settings Honor.

📉 Traffic saving:

• 📊 Set a data consumption limit in Settings → Mobile network → Data usage.
• 🚫 Block background traffic for unnecessary apps (e.g. automatic game updates).
• 🔄 Use data compression in your browser (in Chrome: Settings → Traffic Saver).

On models Honor 50/60/70 With Magic UI 6+ There's a hidden "Smart Sharing" option that automatically turns off the hotspot if it's idle for more than 10 minutes. To disable it, go to Settings → System → Accessibility → Power Management and deactivate the corresponding switch.

If the speed remains low, try changing Wi-Fi channel:

1. Download the app WiFi Analyzer to the second phone.
2. Check which channels are the least loaded in your environment.
3. On Honor In the access point settings, select manual mode and specify a free channel (for example, 6 or 11 for 2.4 GHz).

5. Common mistakes and their solutions

Even if you followed the instructions, problems may still occur. Let's look at common issues and how to fix them:

🚨 Error: "Failed to enable access point"

🔹 Reason 1: The carrier is blocking the feature. The solution is to call support and activate the "Modem/Access Point" option.

🔹 Reason 2: Conflict with VPN. Disable VPN on Honor V Settings → Advanced → VPN.

🚨 Error: "Connected, but no internet access"

🔹 Check it out APN- settings: they must match the operator's recommendations.

🔹 Try specifying DNS manually: go to Wi-Fi Settings → Advanced → IP Settings and select Static, then enter 8.8.8.8 And 8.8.4.4.

🚨 **Error: "The access point turns off by itself"

🔹 This is due to energy savings. Open Settings → Battery → Launch apps and disable optimization for Settings And Access point.

🔹 On some models (Honor 20 Pro, View 20) resetting network settings helps: Settings → System → Reset → Reset Wi-Fi, mobile networks, and Bluetooth.

What to do if nothing helps?

• 📱 Update the firmware to the latest version (Settings → System → Software Update).
• 🔧 Reset network settings (see above).
• 📞 Contact support Honor, if the problem is hardware (for example, the Wi-Fi module is faulty).

How can I check if an operator is blocking distribution?

If a notification appears when you turn on the hotspot, "A subscription is required to use the modem," it means your carrier has restricted the feature. To bypass the block, you can:

1. Insert a SIM card from another operator (for example, Tele2 often allows distribution without restrictions).

2. Use a USB modem (connect Honor to the PC via cable and turn it on USB modem in the settings).

3. Activate a paid option with your operator (cost: 50 to 200 rubles per month).

6. Alternative ways to share internet with Honor

If Wi-Fi isn't working or you need other options, consider these methods:

🔌 USB modem

Connect Honor to another device (laptop or PC) via cable, then in the access point settings, select USB modemThis method saves battery life and provides a stable connection.

📶 Bluetooth modem

Less popular due to slow speeds, but suitable if Wi-Fi is disabled. Activate Bluetooth modem in the settings Honor, then connect the second phone via Bluetooth.

🌍 Using third-party applications

Apps like PdaNet+ or ClockworkMod Tether allow you to bypass operator restrictions, but require root rightsWithout them, not all models work. Honor.

⚠️ Attention: On Honor With EMUI 11+ And Magic UI 5+ Installation of APK files from unknown sources for tethering apps is blocked. This is a security measure that can only be bypassed via ADB.

If you frequently share internet, consider purchasing portable 4G routerIt consumes less energy than a smartphone and supports connection to up to 10 devices.

7. Security when sharing Wi-Fi with Honor

An open access point puts your data at risk. Follow these rules to protect yourself:

🔐 Always use a complex password (at least 12 characters, with numbers and special characters).

🔄 Turn off the access pointwhen it's not needed. This will save battery power and prevent unauthorized connections.

📡 Hide your SSID (network name) if you're sharing internet in a public place. To do this, enable the option in the access point settings. Hide network.

🚫 Disable automatic connectionsOn the second phone, disable the option. Auto-connect to known networks.

How to check who is connected to your access point?

1. On Honor go to Settings → Hotspot & Tethering → Connected devices.
2. If you see unfamiliar gadgets, change the password or disable the hotspot.

On some firmware (EMUI 13) there is a function MAC address restrictionsYou can allow connections only to specific devices:

1. In the access point settings, select Allow only specified devices.
2. Add MAC addresses of trusted devices (you can find them in the Wi-Fi settings of your second phone).

FAQ: Frequently asked questions about Wi-Fi hotspots with Honor

Is it possible to share Wi-Fi from Honor if VPN is enabled?

Yes, but the speed may drop by 30-50%. Some VPNs (for example, ProtonVPN) block internet distribution - in this case, disable your VPN or change the server.

Why is there no "Access Point" option on Honor 30/40/50?

You probably have enterprise firmware installed (eg. EMUI Enterprise). Update the software via HiSuite or contact the service center.

How to share internet from an Honor device to an iPhone?

The algorithm is the same, but on iPhone you may need to manually specify DNS (8.8.8.8) in the Wi-Fi settings if websites do not open.

How many devices can be connected to Honor hotspot?

The official limit is up to 8 devices, but in practice, speeds drop noticeably with just 3-4 connections. For stable operation, we recommend not exceeding 2-3 devices.

Is it possible to share Wi-Fi from Honor without a SIM card?

No, to share mobile internet, you need an active SIM card with a data plan. Alternatively, you can connect Honor to another Wi-Fi network and share it (optional Repeater mode, not available on all models).