How to share Wi-Fi from an Honor phone on Android: a complete guide with all the details

Sharing Internet from a phone Honor at the base Android Turns your smartphone into a fully-fledged router, capable of providing network access to a laptop, tablet, or other mobile device. This feature is especially useful when traveling, at the cottage, or when the main Wi-Fi connection suddenly goes down. However, not all users know how to set it up correctly. access point on Honorto avoid connection problems or rapid battery drain.

In this article, we will not only look at the standard method of activating the modem mode, but also consider hidden settings, which will help optimize your network sharing. You'll learn how to change your network name and password, and why devices may not connect to your Honor, and what to do if the internet is slow. We'll also reveal a few unique firmware features Magic UI, which are missing on the "naked" Android.

Preparing your Honor phone for Wi-Fi sharing

Before you enable tethering, make sure your Honor I'm ready for this task. Here are the key points to check:

• 📶 Mobile InternetMake sure your phone has mobile data (3G/4G/5G) enabled and a stable signal. Wi-Fi sharing will be useless without a network connection.
• 🔋 Battery charge: Tethering consumes a lot of power. Charge your phone to at least 50% to avoid unexpected disconnections.
• 🔒 SecurityIf your phone has restrictions from your operator (for example, blocking data sharing), you will have to remove them (more on that below).
• 📱 Software updates: Check if your firmware is up to date Settings → System → Software UpdateIn older versions Magic UI Some options may be missing.

Pay special attention to your mobile operator's tariff. Some tariff plans blocking internet distribution or limit the speed when using the phone as a modem. For example, MTS And Beeline There are separate data sharing options that require additional activation. Check with your carrier to avoid unexpected restrictions.

⚠️ Attention: On phones Honor With two SIM cards, Wi-Fi hotspots are enabled by default through the primary SIM (slot 1). If you need to use the second SIM, go to Settings → Mobile network → Access point name (APN) and configure the profile manually.

The standard way to enable hotspot on Honor

The easiest way to activate tethering mode is through the settings menu. These instructions are suitable for most models. Honor on Magic UI 4.0–7.0 (including Honor 50, Honor 70, Honor 90 and others). Follow the steps:

1. Open the app Settings (gear icon on the main screen).
2. Go to the section Mobile network (on some models - Wireless networks).
3. Select an item Access point and modem (or Modem mode).
4. Activate the slider Wi-Fi hotspot.
5. When you turn it on for the first time, the system will prompt you to set up a network name (SSID) and password. Set them (we recommend using WPA2-PSK for safety).

Once activated, other devices will be able to find your network in the list of available Wi-Fi networks. To connect, they will need to enter the password you specified. The default network name is usually HONOR-XXXX, Where XXXX — the last digits of the phone's IMEI.

Make sure mobile internet is enabled

Check network visibility on another device

Enter your password correctly (case sensitive!)

Disable VPN on the connecting device (may block access)

-->

If after turning on the access point the devices do not see your network, try:

• 🔄 Restart your phone.
• 📵 Temporarily disable Bluetooth (sometimes it interferes with Wi-Fi).
• 🔧 Reset network settings in Settings → System → Reset → Network reset.

How to change the network name (SSID) and password on Honor

The default network name and password are not always convenient. For example, the automatically generated SSID may contain numbers that are difficult to remember, and the default password is often too simple. To change these settings:

1. Go to Settings → Mobile networks → Hotspot & tethering.
2. Click on Setting up a Wi-Fi hotspot (or Wi-Fi configuration).
3. In the field Network name enter a new one SSID (For example, Honor_Hotspot_2026).
4. In the field Password Set a new security key (at least 8 characters, using letters and numbers).
5. Click Save.

After changing the settings, all previously connected devices will be disconnected and will need to re-enter the new password. To avoid confusion, we recommend:

• 📝 Write down the new password in your phone's notes.
• 🔄 Use an easy-to-remember network name (e.g. Honor_Name_Year).
• 🔒 Don't use simple passwords like 12345678 - they are easy to hack.

⚠️ Attention: On some models Honor (For example, Honor 8X or Honor 10 LiteAfter changing the password, the hotspot may temporarily disable itself. In this case, restart your phone and re-enable the hotspot.

Daily

1-2 times a week

Only on trips

Very rarely

Never used it-->

Wi-Fi Sharing Problems on Honor and Their Solutions

Even after proper configuration, the access point Honor may operate unstably. Let's look at typical problems and how to fix them:

If none of the above methods help, try resetting your network settings to factory defaults:

Settings → System → Reset → Reset network settings

This operation will delete all saved Wi-Fi networks and passwords, but often solves connection problems.

What should I do if the operator blocks the distribution?

Some operators (eg. Tele2 or Iota) restricts internet tethering on plans without this option. You can bypass the block:

1. Activate the additional service "Internet Sharing" (paid).

2. Use a VPN on your phone (for example, ProtonVPN or Windscribe), but this may reduce speed.

3. Reflash the phone to a custom firmware (risky, voids the warranty).

It’s better to check the conditions with your operator or change your tariff.

Hidden Wi-Fi Sharing Features on Honor (Magic UI)

Firmware Magic UI from Honor contains several hidden possibilities, which are not included in the standard AndroidHere are the most useful ones:

• 🔄 Automatic shutdown: The access point can turn off after a specified period of inactivity. To configure:

  Settings → Mobile networks → Hotspot & tethering → Timeout

  Set value Never, if you want the distribution to work constantly.

• 📊 Traffic limitationYou can set a traffic limit for connected devices (useful if you have a limited data plan). Path:

  Settings → Mobile networks → Hotspot & tethering → Data limit

• 🔒 Device blacklistBlock specific devices by MAC address (if someone connects without your knowledge). The setting is hidden in the access point's advanced settings.
• 📶 Selecting a Wi-Fi band: On new models (Honor 90, Honor Magic5) you can switch between 2.4 GHz And 5 GHz for better compatibility or speed.

Another useful feature is quick access point enable via the notification panel. To do this:

1. Pull down the notification panel.
2. Find the icon Access point (may be hidden under Edit).
3. Drag it to your active shortcuts for quick access.

How to share Wi-Fi from an Honor device without a password (open network)

Sometimes you need to create open access point without a password - for example, for public use or connecting devices that do not support key entry (some smartwatches or IoT gadgets). However, this unsafe, as outsiders could be able to connect to your network. If the risk is justified, do the following:

1. Open Settings → Mobile networks → Hotspot & tethering → Set up Wi-Fi hotspot.
2. In the field Security select Absent (or Open).
3. Save the settings.

After this, any device within range will be able to connect to your network without entering a password. Please note:

• ⚠️ All transmitted data (including logins and passwords) will be unprotected.
• 📵 An open network can lead to exceeding the traffic limit, if third-party users connect to it.
• 🔧 Some operators block distribution without a password (required WPA2).

⚠️ Attention: On phones Honor With Magic UI 6.0+ When selecting an open network, a risk warning may appear. Confirm the action if you are sure.

Alternative ways to share internet with Honor

Besides Wi-Fi, the phone Honor supports two more methods of Internet distribution:

1. Via Bluetooth

Suitable for connecting a single device (such as a laptop or tablet) with minimal battery drain. Speed ​​will be slower than Wi-Fi, but stability is higher. To enable:

Settings → Devices → Bluetooth → Enable Bluetooth tethering

2. Via USB (USB terminal)

The most reliable method if you need to connect a laptop or PC. A USB cable (preferably the original) is required. Activation is as follows:

Settings → Mobile networks → Hotspot & tethering → USB tethering

After connecting the cable to the computer in Device Manager A new network connection will appear.

Comparison of methods:

FAQ: Frequently asked questions about Wi-Fi hotspots with Honor

Is it possible to share Wi-Fi with Honor if the phone doesn't have a SIM card?

No, to share mobile internet, you need an active SIM card with mobile data. However, if your phone is connected to another Wi-Fi network (for example, your home network), you can share that Wi-Fi connection further using the [Share] function. Repeater mode (not available on all models).

Why does the data sharing on my Honor 30 turn off automatically after 5 minutes?

Most likely, the inactivity timeout is enabled. Disable it in Settings → Mobile networks → Hotspot & tethering → Timeout, having chosen NeverAlso check your battery saving settings—they may disable data sharing to conserve battery life.

How to increase the hotspot range on Honor?

The range depends on the power of the phone's Wi-Fi module, but you can improve the coverage a little:

• Place your phone in an open area (not in a pocket or bag).
• Turn off Bluetooth and NFC - they can cause interference.
• Switch to range 2.4 GHz (in the access point settings) if the devices are far away.
• Use an external antenna (requires an OTG adapter and phone support).

Is it possible to share internet from Honor to iPhone?

Yes, but there may be connection issues due to the specifics iOSTo share the Internet with Honor on iPhone:

1. On Honor Turn on the hotspot with a password.
2. On iPhone go to Settings → Wi-Fi and select your network Honor.
3. If the connection does not occur, try Honor change security type with WPA2/WPA3 on WPA2-PSK.
4. Restart both devices.

How much traffic does Wi-Fi sharing from a phone consume?

Traffic consumption depends on the activity of connected devices:

• 📱 Browsing social media: ~60–150 MB/hour.
• 🎮 Online games: ~100–300 MB/hour.
• 🎥 Video viewing (Full HD): ~1–3 GB/hour.
• 💼 Working with documents: ~10–50 MB/hour.

To control your consumption, use the built-in traffic counter in Settings → Mobile Network → Data Usage.