The situation when on a smartphone with an operating system Android there is mobile internet, and on iPhone It's not there, but it's quite common. Users often wonder how to quickly and easily set up a connection without unnecessary wires. The process of setting up an access point on devices Xiaomi may differ from the standard procedures known from other brands, which can sometimes cause difficulties.
In this article, we will examine in detail the algorithm of actions for creating Wi-Fi hotspots on Redmi smartphones. We'll cover not only the basic steps but also specific settings that often block the connection. iOS devices. Understanding these nuances will help you avoid wasted time and stress.
Modern shells MIUI And HyperOS offer flexible network management tools. However, it is precisely this flexibility and multiple layers of security that sometimes prevent the average user from quickly connecting devices. Let's figure out how to properly configure yours. Redmi for traffic distribution.
Preparing Redmi for Internet Sharing
Before attempting to connect devices, you must ensure that the basic settings of your smartphone are correct. Xiaomi. First of all, check if your mobile data is activated. Without active mobile Internet Traffic distribution is technically impossible, even if the access point slider is turned on.
It's also worth paying attention to the network operating mode. In some cases, switching between standards 4G/LTE And 3G may affect connection stability. Make sure your cellular signal is strong enough to transmit data.
- 📶 Check that mobile data is enabled in the notification shade.
- 📱 Make sure that Airplane mode is not enabled on your phone.
- 🔋 It is advisable to have a battery charge above 20% for stable operation of the module.
- 📡 Check your mobile operator's signal strength.
It's important to understand that distributing internet is a power-intensive process. Module Wi-Fi When operating in hotspot mode, the device consumes significantly more power than during normal use. Therefore, it's best to charge the device before starting a long session.
⚠️ Note: If you have a data limit from your operator, keep track of your usage. iPhone can quickly "eat" the entire package while downloading updates or backups.
Checking your balance and remaining megabytes is a mandatory procedure before starting work. This will help avoid unpleasant surprises such as a blocked number or additional paid options.
Basic hotspot setup on Xiaomi
To start the seeding process, you need to go to the system settings. The path to the required menu may differ slightly depending on the shell version, but the logic remains the same. Open the menu Settings and find the section responsible for connections.
In most current versions MIUI the required point is located along the path: Settings → Connection & Sharing → Wi-Fi HotspotIn some older builds, this section may simply be called "Modem Mode" or be located in the advanced wireless network settings.
Once you enter the menu, you'll see a switch labeled "Wi-Fi Hotspot." Turn it on. The system will automatically prompt you to configure network settings if you're doing this for the first time. This is where you'll set the network name (SSID) and password to connect.
Use a strong password containing letters and numbers. Standard security protocol WPA2-Personal is the optimal choice for compatibility with all devices AppleIt is not recommended to use open networks without a password, as this poses a security risk to your data.
☑️ Checking access point settings
Once the slider is turned on, the smartphone will start broadcasting the signal. On the screen Redmi An access point icon will appear in the status bar. The device is now ready to accept connections from external devices, including iPhone.
Critical frequency and standard settings
One of the most common reasons why iPhone does not see the access point Redmi or can't connect to it, there is an incompatibility of frequency ranges. Smartphones Xiaomi by default, a range is often used 5 GHz for distribution, as it provides higher speed.
However, many models iPhone, especially older generations, either have driver limitations or simply don't support operating as a client in the 5 GHz band of some routers. In this case, the phone simply "ignores" the network.
To fix this, you need to force a frequency switch. Go to the menu Setting up a Wi-Fi hotspot. Find the "Frequency Range" or "AP Band" item. Change the value from 5.0 GHz on 2.4 GHz.
Settings → Connection and Sharing → Wi-Fi Hotspot → Set up hotspot → Frequency band → 2.4 GHzThe 2.4 GHz band has greater penetration and maximum compatibility. After changing this setting, the network may be interrupted for a second and then restart. iPhone should detect and connect to the network without any problems.
- 📡 2.4 GHz - maximum compatibility, but lower speed.
- 🚀 5 GHz — high speed, but shorter range and possible compatibility issues.
- 🔄 Switching requires restarting the access point.
- 📶 2.4 GHz works better through walls and obstacles.
Why might 5GHz not work with iPhone?
The 5 GHz band has a shorter wavelength, making the signal less powerful. Furthermore, some channels in this band may be banned by regulators in some countries, and if the phone and router (access point) are in different regions, the devices may ignore each other. Switching to 2.4 GHz solves 99% of visibility issues.
You should also check the encryption type in this menu. Make sure it is selected. WPA2-PSKUsing legacy WEP or the newer WPA3 (if available) may in some cases cause conflicts when handshake with devices. iOS.
Setting up a connection on iPhone
After Redmi configured and broadcasting a signal, let's move on to iPhoneThe procedure here is standard, but there are some nuances. Open Settings and go to the section Wi-Fi.
In the list of available networks, find the name you set on your smartphone. XiaomiIf you haven't changed the default name, it will contain the phone model, for example, "Redmi Note 10." Tap it.
The system will prompt you for a password. Enter the character combination you set in the access point settings. Be careful: iOS Case sensitive. After entering, click "Connect."
If the connection is successful, a check mark will appear next to the network name, and a Wi-Fi icon will appear at the top of the screen (or in the "notch"). Now your iPhone uses mobile Internet Redmi.
⚠️ Note: If you receive an "Incorrect password" error after entering the correct password, try deleting the saved device from the list of connected clients on your Redmi and creating a new password, excluding special characters.
In some cases iPhone You may receive a warning that "Secure connection not available" or "No internet access." This is normal for mobile hotspots, as they don't have full enterprise-grade encryption. You simply need to confirm the action.
Comparison of distribution methods: Wi-Fi, Bluetooth, and USB
Users often forget that sharing the Internet with Redmi on iPhone Wi-Fi isn't the only option. There are alternative methods that can be useful in certain situations, such as saving battery life or improving stability.
The table below provides a comparison of the main traffic transfer methods so you can choose the best option for your current needs.
| Parameter | Wi-Fi Hotspot | Bluetooth | USB modem |
|---|---|---|---|
| Speed | High (up to 100+ Mbps) | Low (up to 2-3 Mbps) | Maximum |
| Battery consumption | High | Short | Charging an iPhone |
| Range | Up to 10-15 meters | Up to 10 meters | Cable length |
| Complexity | Low | Average (conjugation) | Low |
Bluetooth modem — an interesting option for background tasks that require a constant but slow connection (for example, for messaging apps). The speed is extremely low, so you can't watch videos, but the battery drain is minimal.
USB connection cannot be used for ligament Redmi → iPhone Directly, since iOS doesn't support USB tethering from Android devices without jailbreaking and complex tweaks. This method only works the other way around (iPhone tethering to PC).
Troubleshooting visibility and connectivity issues
Even with the correct settings, glitches may occur. If iPhone If you can't see the network or it drops the connection, the problem may be due to system limitations. MIUIThis shell is known for its aggressive power saving, which can "kill" the distribution process.
Go to battery settings and find the "Tethering" app or the system process responsible for tethering. Set the mode to "Unlimited." This will prevent the system from disabling Wi-Fi to save battery.
Another common cause is an overcrowded client list. In the access point settings, Redmi There's a section called "Connected Devices." If there are a lot of unknown subscribers, delete them and change the password. The connection limit is usually 8-10 devices.
- 🔄 Restart both smartphones - this solves 50% of the problems.
- 📶 Change the Wi-Fi channel in the access point's advanced settings.
- 🛡 Disable VPN on Redmi if it is active.
- 📱 Make sure that "Private Wi-Fi Address" is not enabled for this network on your iPhone (you can try disabling it in the network settings on your iPhone).
⚠️ Note: The settings interface may change with MIUI updates. If you can't find the option, use the settings search (the magnifying glass at the top of the settings screen) and search for "Access Point" or "Tethering."
The "QR Code Hotspot" feature is also worth mentioning. A QR code is often displayed on the Redmi hotspot setup screen. You can scan it with your iPhone's camera, and the connection will be established automatically, without manually entering a password. This is convenient and reduces the risk of error.
If all else fails, try resetting your Redmi's network settings. This won't delete your photos or contacts, but it will return all network settings to factory defaults. Here's how: Settings → Connection and sharing → Reset Wi-Fi, mobile networks, and Bluetooth.
Why does my iPhone say "Can't connect to the network"?
This most often occurs due to a security or frequency mismatch. If the Redmi is distributing 5 GHz, and the iPhone is old or has a software glitch, it will not be able to complete the handshake. Another possible cause could be a static IP previously assigned to the iPhone for a different network. Try selecting "Configure IP" → "Automatic" in the iPhone's Wi-Fi settings.
Is it possible to share internet with a Redmi device if it has an ad blocker?
Yes, but there are some caveats. Some VPN services and ad blockers (operating through a local VPN tunnel) can block internet tethering, as the system can't simultaneously use a virtual network interface for both the VPN and the access point. Try temporarily disabling the ad blocker.
Does Redmi get very hot when distributing?
Yes, heating is a normal physical reaction of the processor and Wi-Fi module under high load. It is recommended to remove the case, if any, and avoid placing the phone under a pillow. In hot weather, it is better to keep the device on a table or near a fan.
How do I find out who is connected to my Wi-Fi?
In the Redmi hotspot menu, there's a "Connected Devices" section. It displays the number of clients and their names. By tapping on a device, you can block it (blacklist it) to stop accessing your data.
Does sharing work if power saving mode is enabled on Redmi?
In hard power saving mode, the system may forcibly turn off the access point or reduce the transmit power, resulting in an unstable connection. For continuous wireless sharing, it's best to disable power saving mode.