How to Share Wi-Fi with the Honor 8A: 5 Methods + Troubleshooting

Smartphone Honor 8A (model JAT-LX1/LX2/LX3) remains a popular device for distributing mobile internet, despite the release of new models. Its main advantages: support dual-band Wi-Fi (2.4/5 GHz), an energy-efficient processor, and the ability to use modem mode for up to 10 hours without recharging. However, many users encounter issues: the hotspot suddenly disconnects, devices fail to connect, or speeds drop to a crawl.

In this article you will find not only basic setup instructions, but also hidden functions EMUI 9.1 (firmware Honor 8A), which will help optimize distribution. For example, how to limit the speed for connected devices or enable WPA3-encryption for increased security. We'll also look at alternative methods of distributing via USB and Bluetooth — they often help out when the phone's Wi-Fi module overheats.

If you have previously tried to set up a hotspot on other devices (for example, Samsung or Xiaomi), be careful: interface Honor 8A There are some key differences. There's no separate "Tethering" option in the quick settings, and some options are hidden in the developer menu. But first things first.

1. Preparing your phone before sharing Wi-Fi

Before turning on the access point, make sure that your Honor 8A ready for this task. Skipping this step often leads to connection problems or rapid battery drain. Here's what to check:

• 🔋 Battery charge: minimum level - 30%. When distributing Wi-Fi, the phone consumes 40-60% more energy than in normal mode.
• 📶 Mobile network signal strengthIf the indicator shows 1-2 bars, your internet speed will be extremely slow. It's best to move closer to a window or use an external antenna (if supported).
• 🔄 Firmware updates: in older versions EMUI There are bugs with disabling the access point. Check the software is up to date. Settings → System → Software Update.
• 🛡️ Antivirus and VPN: some applications (eg Kaspersky or NordVPN) are blocking internet access. Disable them temporarily.

Pay special attention tariff plan. Many operators (for example, MTS or Beeline) limit upload speed by default. To avoid unpleasant surprises, send a USSD request:

*111*59#

— to check the available data for modem mode. If the response shows "0 MB," contact your operator to activate the option.

2. Method 1: Sharing Wi-Fi using standard settings

This is the simplest method that works on all versions. EMUIThe instructions are valid for firmware 9.1.0 and newer:

1. Open Settings (gear icon on the main screen).
2. Go to the section Wireless Networks → Access Point and Modem.
3. Tap on the item Wi-Fi hotspot.
4. Turn on the slider in the upper right corner.
5. Click Setting up an access pointto change:
   • 🔑 Network name (SSID): by default - HONOR-XXXX.
   • 🔒 Password: minimum 8 characters, numbers and letters recommended.
   • 📡 Range: select 5 GHz for less interference (but shorter range) or 2.4 GHz for better compatibility.

Important: If an unknown gadget appears in the list of connected devices, change the password immediately. EMUI 9.1 There are no notifications about new connections, so check the list manually in the menu Connected devices.

How to remove the limit on the number of devices?

In standard settings Honor 8A You can connect up to 8 devices. To increase the limit to 10, activate developer mode (tap 7 times Build number V Settings → About phone), then enable it in the developer menu Absolute Wi-Fi Peer Limit and set the value 10.

⚠️ Attention: If your phone's internet connection disappears after turning on the hotspot, check your APN settings. Some operators (for example, Tele2) require a separate APN for modem mode. Request the parameters from your operator or find them on the official website.

3. Method 2: Sharing via USB (for PC)

This method is useful if:

• 🖥️ Need to connect desktop PC without Wi-Fi adapter.
• 🔋 Want to save battery life (USB sharing consumes 30% less energy).
• 📶 In an area with a weak Wi-Fi signal (USB connection is more stable).

Instructions for Windows 10/11:

1. Connect Honor 8A to the PC via the original cable (important! Not all cables support data transfer).
2. On your phone, select the mode File Transfer (MTP) in the notification curtain.
3. Open Settings → Wireless & networks → Hotspot & tethering.
4. Activate the slider USB modem.
5. On your PC, wait for the drivers to install (a restart may be required).

If Windows does not recognize the device:

1. Open device Manager (Win + X → Device Manager).
2. Find Honor 8A in the "Other devices" section (yellow triangle).
3. Right click → Update Driver → Search this computer.
4. Select a driver from the list: HUAWEI Mobile Connect - Network Card.

4. Method 3: Sharing via Bluetooth (for low power consumption)

Bluetooth connection is suitable for transmitting Internet to one device With minimal battery drain. The speed will be lower (up to 3 Mbps), but it's enough for messaging apps or email. How to set it up:

1. Turn on Bluetooth on both devices.
2. On Honor 8A go to Settings → Devices → Bluetooth.
3. Tap the name of the target device (e.g. laptop) and confirm pairing.
4. Return to Settings → Wireless & networks → Hotspot & tethering.
5. Activate Bluetooth modem.

On Windows after pairing:

1. Open Settings → Devices → Bluetooth & other devices.
2. Find Honor 8A in the list and click Connect via → Access Point.

⚠️ Attention: Some laptops (especially with Realtek Bluetooth) do not support internet access via Bluetooth. If the connection fails, check the adapter's compatibility on the manufacturer's website.

5. Solving common problems

Even after proper setup, errors may still occur. Here are the most common ones and how to fix them:

🔴 The hotspot turns on, but devices don't connect.

• 🔄 Restart your phone and the target device.
• 🔑 Make sure you entered your password correctly (case sensitive!).
• 📡 Check if there is a network name conflict (SSID) with other networks nearby. Try changing it to something unique (e.g., Honor8A_MyNet).
• 🛠️ Reset network settings: Settings → System → Reset → Network reset.

🔴 The phone has internet, but it doesn't share data.

• 📱 Check if the mode is active Saving traffic in the SIM card settings.
• 🔌 Turn it off VPN or proxy on the phone.
• 📞 Call your carrier and check if tethering is allowed under your plan. Some packages (for example, "For Smartphone" from Megaphone) block the modem mode.

🔴 The access point keeps disconnecting

• ⚡ Connect your phone to a charger when the battery is low EMUI automatically turns off distribution.
• 🔥 Check your phone's temperature: if it overheats (>45°C), the Wi-Fi module will turn off. Let the device cool down.
• 🛠️ Update firmware: in versions EMUI 9.1.0.120 and below there is a bug with spontaneous shutdown.

6. Distribution Optimization: How to Increase Speed ​​and Stability

Distribution speed on Honor 8A It depends not only on your plan but also on your phone's settings. Here's how to improve performance:

📶 Choosing the Right Wi-Fi Band

In the access point settings (Access Point Settings → Range) two options are available:

• 2.4 GHz: better through walls, but susceptible to interference from other networks.
• 5 GHz: higher speed and less interference, but shorter range (up to 10 meters).

If the devices are in the same room, choose 5 GHzFor greater range - 2.4 GHz, but change the channel manually (optimal: 1, 6 or 11).

🔧 Adjusting MTU to reduce ping

If you experience lag in games or video chats, reduce MTU (Maximum Transmission Unit):

1. Activate developer mode (7 taps per Build number).
2. Go to Settings → System → Developer options.
3. Find Access point MTU and set the value 1400 (default is 1500).

📊 Speed ​​limit for connected devices

To prevent one device from cluttering up the channel, set limits:

1. Install the application NetMaster from AppGallery.
2. Open the section Access point.
3. Select a connected device and set a limit (for example, 5 Mbps).

7. Alternative apps for Wi-Fi sharing

If the standard settings Honor 8A If you're not satisfied, try third-party utilities. They offer additional features: blacklist of devices, automatic shutdown timer or traffic compression.

Please check compatibility with before installation. EMUI 9.1Some applications (eg. Barnacle Wi-Fi Tether) do not work on devices Huawei/Honor due to manufacturer restrictions.

⚠️ Attention: Wi-Fi sharing apps may conflict with built-in features EMUIIf after installation the access point stops turning on, reset the network settings (Settings → System → Reset → Network reset).

FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 8A

Is it possible to distribute Wi-Fi with Honor 8A without a SIM card?

No, to share mobile internet, you must have an active SIM card with a supported plan. However, you can share Internet from another device, if you connect Honor 8A to an external network via USB or Bluetooth and enable re-distribution (function Bridge in some firmware).

How many devices can be connected simultaneously?

By default, up to 8 devices. To increase the limit to 10, activate developer mode and change the parameter Absolute Wi-Fi Peer Limit (See spoiler in section 2.) However, keep in mind that when connecting 5+ devices, the speed on each device will drop by 2-3 times.

Why does the battery drain quickly when distributing Wi-Fi?

The Wi-Fi module and mobile data are among the most energy-consuming components of a smartphone. When actively distributing Honor 8A consumes up to 1.2–1.5 A current (versus 0.3–0.5 A in standby mode). To reduce consumption:

• Connect your phone to a charger (preferably an original 10W adapter).
• Reduce screen brightness to 30%.
• Turn off background sync (Settings → Accounts → Auto-sync).

How to share Wi-Fi with Honor 8A on iPhone?

iPhone can connect to an access point Honor 8A, but sometimes there are problems with authorization. To fix:

1. On Honor 8A set it in the access point settings WPA2-PSK encryption (not WPA3).
2. On iPhone Forget the network (Settings → Wi-Fi → (i) → Forget this network).
3. Please reconnect by entering your password manually (not via autofill).

If iPhone It still doesn't connect, reset the network settings on it (Settings → General → Reset → Reset network settings).

Is it possible to distribute Wi-Fi with Honor 8A abroad?

Yes, but keep two things in mind:

1. Roaming: Check with your operator the cost of mobile Internet in the country of residence. For example, MTS in Turkey it costs 990 ₽/day for unlimited access, and Beeline — 690 ₽.
2. Frequencies: Some countries (eg USA) use different 4G bands (Band 4, 12). Honor 8A supports them, but the speed may be lower than at home.

Before your trip, check your APN settings: sometimes you need to manually enter your local operator's details.