Smartphone Honor 8sDespite its budget-friendly price, the Wi-Fi hotspot remains a reliable tool for creating a mobile hotspot. In situations where landline internet is unavailable or unreliable, the ability to turn a phone into a full-fledged router becomes critical. This feature allows laptops, tablets, and other gadgets to connect to the global network via the device's mobile data.
The process of activating the modem mode in the EMUI shell, on which it is based Honor 8s, has its own characteristics that distinguish it from standard Android. Users need to know not only how to access the switch but also how to properly configure security settings to prevent unauthorized access to your traffic. Below, we'll detail all available sharing methods and potential nuances.
It's important to keep in mind that active internet tethering significantly increases power consumption. Your smartphone's battery may drain faster than usual, so it's recommended to keep your device charged or connected to a power source when using it as a router for extended periods. You should also monitor your mobile data usage, especially if you don't have unlimited data plans.
Preparing to set up an access point
Before you start broadcasting a signal, you need to make sure that your mobile Internet active and has a sufficient signal strength. Without a stable 4G or 3G connection, data tethering will be impossible or extremely slow. Check your SIM card balance and ensure your carrier isn't blocking tethering.
It's also worth thinking about the network name and password in advance. The default settings often include the phone model name, which isn't always convenient for identifying it among the many other networks in range. Connection security — a priority parameter that cannot be ignored while keeping the network open.
Make sure the module is enabled on your device. Wi-Fi, even if you're not connected to any network. Some firmware versions may require the wireless interface to be activated to properly launch access point mode. This is a technical requirement of the operating system. Android.
The classic activation method is through settings.
The most common method for enabling network sharing is through the main system settings menu. This allows you to not only launch the network but also configure its detailed parameters, such as frequency range and encryption type.
To get started, open the menu Settings on yours Honor 8sLocate the section, which may be called "Wireless Networks" or "Connections," depending on your shell version. This is where the main switches for the communication modules are located.
Next, select the item Modem mode or Wi-Fi hotspotIn the menu that opens, you'll see a switch that activates the feature. Before turning it on, we recommend tapping the network name or the "Access Point Settings" button to configure the desired settings.
☑️ Pre-launch check
Once activated, a corresponding icon will appear in the notification shade, informing you that the hotspot is active. Now other devices can detect your Honor 8s in the list of available networks and connect to it using the set password.
Using the widget and control panel
To quickly access the distribution function, you don't need to dive into the deep settings menu every time. The system EMUI Offers more efficient management options that save the user time. This is especially convenient when you need to quickly share your internet connection.
Swipe down from the top of the screen to open the control panel. Among the icons, look for the icon labeled "Hot Spot" or depicting an antenna. If you don't see it on the first screen, swipe right in the widget list.
A long press on this widget will take you directly to the sharing settings menu, where you can quickly change the password or see how many devices are already connected. A short press simply turns tethering on or off.
⚠️ Note: When using the quick-start widget, the most recently used settings are often activated. If you've previously changed your security settings, make sure they're still up to date.
Some users prefer to add a hotspot widget directly to their home screen. This allows them to start sharing with a single tap, without unlocking their phone or going through the lock screen, which can be critical in certain situations.
Configuring security and network settings
Deep configuration of the access point on Honor 8s Allows you to optimize your network for your specific needs. In the configuration menu, you can change the default network name (SSID) to anything convenient, such as "Office_Guest" or "Home_WiFi."
Pay special attention to the frequency range. Access point settings often offer the option to choose between 2.4 GHz and 5 GHz. Frequency range 2.4GHz provides longer range and compatibility with older devices, while 5GHz provides faster speeds but shorter range.
You can also configure the device connection limit here. You can limit the number of devices that can simultaneously use your internet connection. This helps prevent bandwidth congestion and preserves connection speed for the main traffic consumers.
| Parameter | Recommended value | Impact on work |
|---|---|---|
| Range | 2.4 GHz | Better compatibility and range |
| Encryption | WPA2 PSK | Maximum data protection |
| Device limit | 3-5 pieces | Maintaining high speed |
| Time-out | 10 minutes | Saving battery life |
What is WPA3?
WPA3 is the latest wireless security standard. It provides stronger password encryption and brute-force protection, but not all devices support it. If your devices are older, it's best to stick with WPA2.
Alternative methods of Internet distribution
In addition to classic Wi-Fi, Honor 8s It also supports other internet connection transfer methods. These can be useful when the Wi-Fi module is faulty or when maximum connection stability is required.
Distribution via USB cable — a great option for laptops that don't have their own Wi-Fi module or when minimal latency is important. To do this, connect your phone to your computer with a cable, go to the modem settings, and enable "USB Modem." The system will automatically install the necessary drivers.
Another way is - Bluetooth modemIt provides a lower data transfer rate but consumes significantly less power. To use this method, you need to pair your phone with the receiving device via Bluetooth, then enable the "Bluetooth tethering" option in your phone's Bluetooth settings.
Each of these methods has its advantages. USB is ideal for desktop use, Bluetooth is suitable for transferring small amounts of data with minimal battery drain, and Wi-Fi remains a universal solution for connecting multiple devices.
Solving typical problems and errors
Sometimes users encounter a situation where the hotspot is enabled, but the internet on connected devices is not working. This is often due to settings. APN (access points) of your mobile operator. Check that the SIM card profile contains the correct parameters.
Another common issue is the inability of devices to connect. This may be caused by incompatible security standards or an overflowing list of approved clients. Try resetting the access point to factory settings and re-creating the network.
If your phone's battery drains quickly or heats up, this is a sign of high load. Lowering your screen brightness and closing background apps on your phone itself will help reduce heat generation. It's also worth checking whether any major updates are running on connected gadgets.
⚠️ Note: Settings interfaces may vary slightly depending on the EMUI software version. If you can't find the item, try searching through your phone's settings.
Frequently Asked Questions (FAQ)
Why don't connected devices see the Wi-Fi network from my Honor 8s?
Check that the network name isn't hidden in the access point settings. Also, make sure you're in a strong reception area and that the correct frequency band is selected (2.4 GHz is visible to all devices, 5 GHz is visible only to modern devices).
Is it possible to share Wi-Fi if your phone doesn't have a SIM card?
No, to share mobile data, you need an active SIM card with data. However, if your phone is connected to Wi-Fi, some models allow you to rebroadcast the signal, but Honor 8s This feature may be limited by software.
How many devices can connect to the hotspot at the same time?
Usually Honor 8s Supports connections to up to 8-10 devices simultaneously. However, the actual number depends on the phone's processor load and the amount of data being transferred.
Does Wi-Fi sharing affect the speed of mobile internet on the phone itself?
Yes, the bandwidth is shared between all connected clients. If one device starts downloading a large file, the speed on all other devices, including the phone itself, may drop significantly.