Smartphone Honor 9X — a popular model with Wi-Fi internet sharing, which is a lifesaver when traveling, at the dacha, or when the main router suddenly stops working. However, not all users know how to properly configure the access point on this device to avoid connection issues with other devices or rapid battery drain.
In this article you will find step-by-step instructions with interface illustrations, a comparison table of distribution modes, and solutions to common errors—from inability to connect to slow speeds. We've taken into account the features EMUI (Honor firmware) and explained how to optimize the settings for stable operation.
If you haven't used the feature before modem and access point On Android, don't worry: the process takes less than a minute. And for experienced users, we've prepared advanced tips—for example, how to change the Wi-Fi frequency band or limit traffic for connected devices.
1. Preparing your phone before sharing Wi-Fi
Before turning on the access point on Honor 9X Check a few key points. First, make sure that the device mobile data activated — without them, there's simply nothing to share. To do this, swipe down the notification panel and make sure the icon Mobile data illuminated.
Secondly, charge your phone at least until 30-40%Wi-Fi hotspots consume a lot of battery, and if the battery level drops below 20%, your smartphone may automatically disable the hotspot. We also recommend disabling background apps, as they can consume data and slow down your speed.
- 📶 Check the signal levelIf you have 1-2 network bars, your upload speed will be extremely slow. It's best to move closer to a window or outside.
- 🔋 Connect the chargerIf you plan to share the internet for a long time, use a cable - this will prevent battery drain.
- 📱 Update the firmware: in older versions EMUI There may be bugs with the access point. Check for updates in
Settings → System → Software Update.
If you use dual SIM Honor 9XPlease note: the hotspot will only share the Internet from the SIM card that is selected for mobile data by default. You can change this in Settings → Wireless & networks → Mobile network → Data SIM name.
2. Step-by-step instructions: how to enable the access point
Now let's move on to the main thing - turning on the modem mode. Honor 9X This is done through the standard Android menu, but with some interface features EMUI. Follow the instructions:
- Open
Settings(gear icon on the home screen or in the application menu). - Go to the section
Wireless networks(orConnections, depending on the firmware version). - Select an item
Modem and access point. - Tap on
Wi-Fi hotspot. - Activate the slider in the upper right corner.
Once enabled, the system will prompt you to configure network settings. Here you can change:
- 🔐 Network name (SSID) — by default this is the phone model, but it is better to set a unique name.
- 🔒 Security type — we recommend leaving
WPA2 PSK(the safest option). - 🔑 Password — at least 8 characters, with numbers and letters. Memorize it or write it down!
- 📡 Frequency range - if your devices support
5 GHz, select it for less interference.
After saving the settings, the hotspot will be active. You can now connect other devices to it—laptops, tablets, or TVs. The network name and password can be found in the same menu. Wi-Fi hotspot, if you forgot them.
☑️ Check before connecting devices
3. Setting up additional parameters
The basic settings are usually enough, but Honor 9X Allows you to fine-tune your access point for specific scenarios. For example, you can limit the number of connected devices or change the Wi-Fi channel to reduce interference.
To open advanced settings:
- Go to
Settings → Tethering & portable hotspot → Wi-Fi hotspot. - Tap the three dots in the upper right corner (or press
Additionally). - The following options are available here:
| Parameter | Default value | Recommendations |
|---|---|---|
| Max. number of devices | 10 | Reduce to 3-5 if you need a consistent speed for each |
| Shutdown timeout | Never | Set it to 5-10 minutes if you forget to turn off the access point |
| Frequency band | Auto | Select 5 GHz, if the devices support this range |
| Hide network (SSID) | Disabled | Enable if you want to connect devices only manually. |
Pay special attention to the parameter AP insulation (if it's available in your firmware). When this option is enabled, connected devices won't be able to "see" each other on the local network. This is useful for security, but can be a hindrance if you want to print from a laptop to a printer connected to the same Wi-Fi network, for example.
What if there is no 5GHz option?
If the 5 GHz band isn't available in the hotspot settings, it means your region or mobile operator is restricting this feature. Also, check whether your device supports this band (the Honor 9X does, but it can be disabled in software).
4. Troubleshooting connection issues
Sometimes devices fail to connect to an access point despite the correct settings. Let's look at common errors and how to fix them:
"Unable to connect to the network" — the most common problem. The causes can be varied:
- 🔄 Restart your phoneSometimes a simple reboot helps. Honor 9X.
- 📵 Check your mobile internet: perhaps the account has run out of money or the operator is blocking the distribution.
- 🔑 Reset network settings: go to
Settings → System → Reset → Reset network settings. - 🛠️ Update the firmware: in older versions EMUI There were bugs with the access point.
If your device connects but the internet doesn't work, check:
- There should be a notification in the notification bar on your phone.
"Access point active: 1 connected device"(or more). - The connected device must have the following status in the network properties:
"Connected, Internet". - Try disabling the VPN on your phone—sometimes it blocks distribution.
Another common case is - slow internet speed when distributing. This may be due to:
- 📶 Weak mobile network signal (check the number of antenna divisions).
- 📴 Speed limitation by the operator (especially if high-speed traffic is exhausted).
- 📱 Background updates on your phone (turn off auto-updates for apps).
5. How to save battery life when sharing Wi-Fi
Sharing the internet is one of the most energy-consuming functions of a smartphone. Honor 9X With a 4000 mAh battery, the access point can drain 15-20% of its charge per hour. To extend its battery life, follow these tips:
Optimizing phone settings:
- 🔋 Turn on power saving mode:
Settings → Battery → Power saving mode. - 🌑 Reduce screen brightness up to 30-40% and set a short lock time.
- 📵 Turn off NFC and Bluetooth, if they are not used.
- 📡 Use the 5 GHz band - it is less energy-consuming at high speed.
External ways to save:
- ⚡ Connect the power bank: even a small 5000 mAh battery will extend the battery life by 3-4 hours.
- 🔌 Use the original charger: Non-original cables may not provide sufficient power.
- 📴 Limit the number of connected devices - each additional one increases the load.
If you are distributing the Internet for a long time (for example, at your dacha), consider purchasing external 4G modem with its own battery. This will reduce the load on the phone and ensure a more stable connection.
6. Alternative ways to share internet from the Honor 9X
Besides Wi-Fi, Honor 9X supports two more ways of distributing the Internet: via USB And BluetoothEach of them has its pros and cons.
Distribution via USB (USB modem):
- ⚡ Pros: minimal battery consumption, high connection stability.
- ⚠️ Cons: requires cable, works with only one device.
To enable:
- Connect your phone to your computer via USB cable.
- In your phone settings, select
Data transfer(when a notification appears). - Go to
Settings → Tethering & portable hotspot → USB tetheringand activate the slider.
Bluetooth sharing:
- 🔗 Pros: low battery consumption, works without cables.
- 🐢 Cons: very low speed (only suitable for instant messengers and email).
To enable:
- Activate Bluetooth on your phone and the device you want to connect to.
- Pair the devices (enter the verification code if required).
- Turn it on in your phone settings
Bluetooth modemon the menuModem and access point.
A USB modem is the best choice for laptops if you need stability. A Bluetooth modem is suitable for rare occasions when you need to conserve battery or a cable is unavailable.
7. Security when distributing Wi-Fi
An open hotspot on your phone is a potential security threat. Attackers can connect to your network and intercept your data. To minimize the risks, follow these guidelines:
Basic protective measures:
- 🔐 Use a complex password: at least 12 characters with numbers, letters and signs.
- 🔄 Change your password regularly, especially if you distribute Wi-Fi in public places.
- 📵 Turn off the access pointwhen it is not needed.
- 👥 Limit the number of devices to the necessary minimum.
Additional settings (for advanced users):
- 🛡️ Turn on the firewall on connected devices.
- 🔗 Turn off file sharing on the local network (in Windows/macOS settings).
- 📡 Use a VPN on your phone, if you distribute the Internet via public networks.
If you frequently share Wi-Fi in cafes, airports, or other public places, consider using virtual access point through apps like PDANet+ or ClockworkMod TetherThey offer additional levels of encryption.
FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 9X
Is it possible to share Wi-Fi from the Honor 9X without a SIM card?
No, to share mobile internet, you need a SIM card with an active plan and mobile data enabled. However, you can share internet via Wi-Fi (if your phone is connected to a different network). To do this, turn on Tethering → Wi-Fi Hotspot and in the settings, select the Internet source Wi-Fi instead of Mobile data.
Why does the connected device say "No Internet access"?
This error occurs in several cases:
- Mobile data is disabled on your phone (check the notification panel).
- The operator is blocking Internet access (call support and check).
- The connected device has an incorrectly configured IP or DNS (try manually entering Google's DNS:
8.8.8.8And8.8.4.4). - Your phone's traffic limit has been reached (check your balance).
How to increase the range of an access point?
Wi-Fi range on Honor 9X Limited by transmitter power (about 10-15 meters indoors). To improve coverage:
- Place the phone in the center of the room, away from walls and metal objects.
- Use an external antenna (if your phone supports OTG connection).
- Switch to range
2.4 GHz- it has a greater range than5 GHz(but at a lower speed). - Connect your phone to a power bank - when the battery is low, the transmitter power may decrease.
Is it possible to share Wi-Fi and use the internet on your phone at the same time?
Yes, Honor 9X Supports both mobile internet use on your phone and sharing it with other devices simultaneously. However, keep in mind:
- Your phone's speed may decrease if you have multiple devices connected to the hotspot.
- Some applications (such as online games) may become unstable due to traffic splitting.
- If the operator limits the speed after the limit is exhausted, distribution can completely "eat up" the remaining high-speed traffic.
How to reset access point to factory settings?
If you've changed your settings and want to reset them back to their original state:
- Go to
Settings → Tethering & portable hotspot → Wi-Fi hotspot. - Tap the three dots in the top corner and select
Reset settings. - Confirm the action. After this, the network name (SSID) and password will return to the default values.
The default network name is HONOR-9X-XXXX (where XXXX are the last digits of the IMEI), the password is a random combination of 8 characters.