The modern smartphone has long ceased to be just a device for making calls and has become a full-fledged control center for the digital world. Model Honor 9X, with its powerful processor and capacious battery, it copes well with the role of a mobile router. Wi-Fi distribution Often becomes the only way to access the internet on a laptop or tablet when away from home. This feature is built into the operating system and doesn't require third-party software.
However, users sometimes encounter configuration nuances that aren't immediately obvious. For example, selecting a frequency band or setting energy saving can significantly impact connection stability. In this article, we'll cover all the intricacies of transforming your Honor 9X to the access point. You'll learn not only how to enable the feature, but also how to optimize it for different use cases.
Before you begin setting up your device, make sure mobile data is activated. Without incoming data, tethering will be useless. Also, check your SIM card balance, as streaming video or downloading files on connected devices can quickly deplete your data plan.
⚠️ Note: Shell Interface EMUI The menu item may vary slightly depending on the software version. If you can't find the menu item, try searching in the settings.
To get started, you need to activate the hotspot feature itself. This is a basic step that allows other devices to see your phone in the list of available networks. The process only takes a few seconds, but requires careful attention to security details.
Go to the main menu and find the section SettingsYou're interested in the category related to wireless networks. In older firmware versions, it may be called "Wireless Networks," while in newer versions, it may simply be "Mobile Networks." This is where the key connection settings are hidden.
Inside the menu, find the item Modem mode or Wi-Fi hotspotClicking on it will reveal a toggle switch. Activate it by moving it to the "On" position. The system will notify you that the feature is enabled and display the default network name.
It is important to pay attention to this immediately. network name (SSID). By default, it often contains the phone model, for example, Honor 9XThis makes your access point recognizable to outsiders. Changing the name to something less obvious is the first step to security.
Connection security is a critical aspect that can't be ignored. An open network allows anyone to connect to your internet and potentially access your data. Setting a password is a must.
In the access point menu, click on the line PasswordThe system will prompt you to enter a character combination of at least 8 characters. It is recommended to use WPA2 PSK as a type of encryption, as it provides reliable protection against most hacking methods.
Create a complex password that includes mixed-case letters and numbers. Avoid simple sequences like "12345678" or your date of birth. A password manager or a safe place will help you remember your complex password.
After entering the password, be sure to click "Save." If you don't, the settings will be reset, and you'll have to enter the combination again. From now on, any device will request this key whenever they try to connect.
Managing connected devices allows you to control who exactly is using your data. You can always see a list of devices currently connected to your access point, helping you identify uninvited guests.
In the access point settings there is often an item Connected devicesMAC addresses and device names are displayed there. If you see an unfamiliar device, you can block it with one click. This will immediately cut off the connection for the intruder.
Some versions EMUI Allows you to create a "Blacklist" or, conversely, a "Whitelist." In the latter case, only pre-approved devices will be able to connect. This is the highest level of control available at the smartphone level.
It is also worth paying attention to connection limitYou can limit the number of devices connected simultaneously, for example, to three. This will prevent bandwidth congestion if someone tries to connect an entire office to your network.
☑️ Network security check
For advanced users, frequency range adjustment is available. Honor 9X Supports both 2.4 GHz and 5 GHz bands. Choosing the right band can significantly impact connection speed and stability.
Range 2.4 GHz It's more versatile. It provides greater coverage and penetrates walls better, but is susceptible to interference from neighboring networks and appliances. Speeds can be lower, especially in apartment buildings.
Range 5 GHz It offers much higher data transfer rates and is less susceptible to interference. However, it has a shorter range and penetrates obstacles less effectively. Older devices may simply not detect a network in this range.
You can switch the range in the menu Wi-Fi hotspot settings -> AP frequency rangeIf your devices support 5 GHz and are close to your phone, this option is optimal for watching high-definition video.
| Parameter | 2.4 GHz | 5 GHz |
|---|---|---|
| Speed | Average | High |
| Range | Big | Less |
| Permeability of walls | Good | Low |
| Interference level | High | Short |
⚠️ Important: When switching to 5 GHz, make sure the devices you're connecting to (laptop, tablet) support this standard. Otherwise, they simply won't find the network.
Sharing the internet is a power-hungry process. The Wi-Fi module operates in constant signal transmission mode, which quickly drains the battery and heats up the device. Optimizing power consumption will help extend battery life.
In the access point settings, find the function Time-out or Auto power offIt allows you to set a time after which the hotspot will turn off if no one is connected. This saves battery if you forget to turn off tethering mode.
It is also worth reducing the screen brightness or turning off the display completely during the distribution. Energy consumption The screen's power consumption often exceeds the communication module's power consumption. If the phone is lying on a table, you don't need the screen.
Avoid using heavy apps on your phone while sharing. Processor Kirin 810, installed in Honor 9X, powerful, but the simultaneous load on the modem and CPU will cause strong heating, which can lead to throttling (decreased performance).
Why does the phone get hot when distributing?
When actively transmitting data, the radio module operates at its maximum capacity, generating heat. This is a normal physical process, but in hot weather, it's best to remove the case for better cooling.
Even with proper setup, connection issues can still arise. These are most often due to software glitches or carrier restrictions. Understanding the cause will help you quickly restore service.
If your devices see the network but can't connect, try reset network settingsThis won't delete your personal data, but it will reset your network settings to factory defaults. Path: Settings -> System -> Reset -> Reset network settings.
Sometimes the problem lies with a static IP address. Make sure your access point is set to obtain an IP address automatically (DHCP). Manually assigning addresses often leads to conflicts if the ranges don't match.
Also, check if the "Data Saver" feature is enabled on the device you're connecting to. It can block background connections, creating the illusion that the internet is down.
Is it possible to share Wi-Fi via USB cable on Honor 9X?
Yes, it's possible. The feature is called USB tethering. It allows you to share your phone's internet connection with your computer via a cable, often providing a more stable connection while simultaneously charging your phone. It's enabled in the same "Tethering" menu.
Why is the 4G icon lit, but the internet isn't available?
Most likely, your traffic limit has been reached or tethering is blocked by your carrier. Some plans require an additional option to use your phone as a router.
How many devices can be connected to Honor 9X at the same time?
Technically Honor 9X Supports up to 8-10 simultaneous connections. However, for stable operation and normal speed, it is recommended to connect no more than 3-4 devices.
Does Wi-Fi sharing affect the speed of mobile internet on the phone itself?
Yes, it does. The bandwidth is shared between all connected clients. If one starts downloading a large file, the speed on the other devices, including the phone itself, will drop.