Smartphone owners Honor 9X often face the need to provide internet access to a colleague's laptop, tablet, or device when a wired connection is not possible. Built-in module Wi-Fi This model instantly transforms the device into a fully-fledged router accessible to other devices. The mobile hotspot feature is built-in and doesn't require any third-party software.
Activating tethering mode only takes a few seconds, but properly configuring security and frequency band settings is critical to network stability. In this article, we'll cover how to set it up in detail. Wi-Fi distributionto ensure maximum speed and protect your data from unauthorized access.
It is worth noting that the shell interface EMUIThe smartphone's underlying operating system has its own menu features. Understanding the logic behind these settings will allow you to quickly adapt to any changes in future firmware updates.
Preparing your smartphone for modem mode
Before you activate the hotspot, you need to make sure that the smartphone itself Honor 9X Has a stable internet connection. Most often, the traffic source is the mobile operator's mobile data, but rebroadcasting an existing Wi-Fi signal is also possible if supported by the current firmware version and data plan.
It's important to check your account balance and available data plan in advance. Tethering via a mobile network can consume data significantly faster than normal usage, especially if connected devices start downloading updates or streaming video.
⚠️ Important: Make sure your tariff plan does not limit speed after reaching a certain traffic limit, otherwise the connection quality on connected devices may drop to minimum values.
It's also recommended to check the battery level, as operating the radio in access point mode significantly increases power consumption. If the charge is below 20%, it's best to connect the device to a power source or power bank before starting a wireless session.
For a smooth setup, prepare the following information: your desired network name (SSID) and a complex password that will be difficult for hackers to guess. Using simple passwords like "12345678" makes your network vulnerable to hacking in minutes.
Step-by-step activation of the access point through the settings
To enable tethering, go to the main system settings menu. On the desktop, find the gear icon and click it. In the list of settings that appears, find the section responsible for wireless connections.
Depending on the software version, the path may differ slightly, but the logic remains the same. You need to find the item Wireless networks or go directly to the section Mobile networkThis is where the main Internet connection controls are hidden.
- 📱 Open the app
Settingson the main screen. - 📡 Go to the section
Wireless networksorMobile network. - 🔥 Find and select the item
Modem mode. - 📶 Click the switch opposite
Wi-Fi hotspotto activate it.
Once the slider is turned on, the smartphone will begin broadcasting a signal. However, the basic setup doesn't end there. You need to ensure that security settings are configured correctly to prevent unauthorized access to your network.
☑️ Check before enabling distribution
Setting up a network name and security settings
The default network name assigned to a device by the manufacturer usually contains the phone model, for example, Honor 9XTo make it easier to identify in the list of available networks among many other devices, it's best to change the name to something unique.
In the access point settings menu, select Access Point Name (SSID)Enter a descriptive name that doesn't contain personal information like your phone number or address. This will help keep unnecessary information out of the public eye.
Setting a password is a critical step. The system will prompt you to select the encryption type. Honor 9X by default and it is recommended to use the standard WPA2 PSK, as it provides reliable protection of transmitted data.
| Parameter | Recommended value | Description |
|---|---|---|
| SSID (Network Name) | Unique name | Don't use personal information in your name |
| Security | WPA2 PSK | The most secure encryption standard |
| Password | Minimum 8 characters | Use letters and numbers |
| Range | 5 GHz (if available) | Higher speed, but shorter range |
Remember that your password should be complex enough to be difficult to crack using brute-force attacks. A combination of 10-12 characters, including uppercase and lowercase letters, numbers, and special characters, is considered optimal.
What should you do if you forgot your access point password?
If you've forgotten the password you set, you can view it in the same access point settings menu. Click the eye icon or the edit password field to reveal hidden characters. If you lose access to the menu, reset the network settings in the general system settings.
Using the 5GHz band for high speed
Smartphone Honor 9X Supports two frequency bands: 2.4 GHz and 5 GHz. The choice of band directly impacts data transfer speed and connection stability, especially in noisy environments.
Range 5 GHz Provides significantly higher data transfer rates and is less susceptible to interference from neighboring routers and household appliances. However, it does have a drawback: a shorter range and poorer penetration through walls.
To switch to 5 GHz frequency, go to the menu Wi-Fi hotspot settings and find the item AP range. Select a value 5 GHzIf your connecting devices are old and do not support this standard, they simply will not see the network.
⚠️ Note: Settings interfaces may differ depending on the EMUI version. If you don't see the band selection option, it's either hidden in your current firmware or automated by the system.
Using the 2.4 GHz band is advisable if you need to distribute internet over long distances or through several walls. This band has a longer range, but will have lower speeds and less stable connections in multi-family buildings.
Managing connected devices and limits
Functional Honor 9X Allows you not only to share the internet but also to control who is connected to your network. The access point menu includes a list of active connections, displaying device names and their MAC addresses.
You can manually disable any suspicious or unwanted devices directly from this list. Simply click on the device name and select the block option. This will immediately stop data transmission for that client.
- 👥 Go to the menu
Connected devices. - 🚫 Tap on the device you want to restrict.
- 🔒 Select an option
BlockorDisable. - ✅ Check the list to make sure there are no strangers.
You can also set a traffic limit. You can set a maximum data volume, after which the hotspot will automatically turn off. This is a useful option for controlling costs if you don't have an unlimited data plan.
To set the limit, find the item Traffic limit In the access point menu, set the desired volume in megabytes or gigabytes. The system will warn you when you approach the set threshold.
Alternative distribution methods: USB and Bluetooth
In addition to classic Wi-Fi, Honor 9X Supports internet sharing via USB cable and Bluetooth. These methods can be useful if the Wi-Fi module on the receiving device is faulty or if maximum connection stability is required.
Sharing via USB cable (USB modem) provides the most stable connection with minimal latency. Furthermore, in this mode, the smartphone is simultaneously charged via the computer, which offsets the high power consumption.
To activate, connect your phone to your PC with a cable, go to Modem mode and turn on the switch USB modemThe system will automatically install the necessary drivers (if they are not present) and create a new network connection in the computer's operating system.
Bluetooth modem is slower and requires pairing, but it uses significantly less power. This option is suitable for transferring small amounts of text information or working with email in the background.
Troubleshooting and troubleshooting
Sometimes users encounter a situation where the hotspot is enabled, but the internet on connected devices is unavailable. Most often, the problem lies with mobile network settings or lack of carrier signal coverage.
Check if the internet is working on the smartphone itself. Honor 9X With Wi-Fi disabled. If the pages don't load, the problem is with your carrier or your mobile operator's APN (access point name) settings.
Another common cause is incompatibility of security protocols. If your old device can't connect, try temporarily changing the encryption type to WPA (without number 2) or open the network to check the connection.
⚠️ Note: Technical specifications and settings menus may be changed by manufacturers in new software versions. Always check the current menu paths against the official manuals for your specific firmware version.
If nothing helps, reset your network settings. Go to System → Reset → Reset network settingsThis action will reset all network settings to factory defaults and often resolves software errors.
Why does my phone's battery drain quickly when using Wi-Fi?
Operating the radio in access point mode requires a constant, strong signal, which puts a significant strain on the battery. To extend battery life, reduce screen brightness, close background apps, and, if possible, use power-saving mode.
Is it possible to share Wi-Fi if the Honor 9X phone is connected to Wi-Fi itself?
In most cases, it's impossible to broadcast Wi-Fi while receiving it using standard Android features—the module will switch to the mobile network. However, some versions of EMUI do support relaying, but this depends on the specific software version and modem model.
How many devices can be connected to Honor 9X at the same time?
Typically, the limit is 8-10 simultaneous connected clients. Exceeding this limit can lead to severe smartphone overheating and a critical drop in internet speed for all users.
Does Wi-Fi sharing affect the speed of mobile internet on the phone itself?
Yes, the bandwidth is shared between all connected devices. If one client starts downloading a large file, the speed on the smartphone and other devices will drop significantly.
Does the operator charge extra for modem mode?
This depends on your plan. Some carriers automatically detect the device type (TTL) and may block data sharing or charge an additional fee. Check your plan's terms in your account.