How to Share Wi-Fi with the Honor 10 Lite: Video Instructions + Step-by-Step Setup

Internet distribution with Honor 10 Lite via Wi-Fi - a convenient way to connect a laptop, tablet, or other smartphone to the network when there is no router at hand. Model supports mobile hotspot function, but many users encounter difficulties: settings are reset, devices won't connect, or speed leaves much to be desired. In this article, we'll look into All methods of distributing Wi-Fi on Honor 10 Lite, including hidden settings, signal optimization and solutions to common errors.

The special feature of this model is lack of support for 5 GHz Wi-Fi in access point mode (unlike Huawei's flagship devices), which limits the maximum speed to ~150 Mbps. However, with proper configuration, even this is enough for comfortable work or video streaming. 720pWe've compiled up-to-date methods, taking into account the latest updates. EMUI (even for devices without Google services), and also added video instructions for clarity.

If you are looking for a way to share the internet with Honor 10 Lite To a computer, another phone, or smart devices—this article will help you avoid common mistakes and set up a stable connection.

1. Preparing your phone for Wi-Fi sharing

Before turning on the access point on Honor 10 Lite There are several mandatory steps that need to be completed. If you skip them, you risk encountering connection problems or low speed.

First, check availability of mobile InternetThe access point retransmits it, therefore:

• 📶 Make sure your phone has a network signal (2G/3G/4G). If the indicator shows H+ or 4G, the speed will be higher.
• 🔄 Restart your phone if the network indicator disappears or shows E (Edge).
• 💳 Check your balance and plan activity—some carriers block data sharing on cheaper plans.

Second, update your firmware. Outdated firmware can cause problems with the Wi-Fi module. To check for updates:

1. Open Settings → System → Software Update.
2. Click Checking for updates and wait for the result.
3. If a new version is available, install it (preferably via Wi-Fi to avoid wasting mobile data).

We also recommend disable battery saving, as it can limit the performance of the Wi-Fi module. To do this:

1. Go to Settings → Battery.
2. Select Power saving mode and turn it off.
3. Enable the option High performance (if available).

Checking your mobile network signal|Updating your firmware|Disabling battery saver|Checking your data plan|Restarting your phone-->

2. How to enable hotspot on Honor 10 Lite

On Honor 10 Lite There are three main ways to distribute Wi-Fi: through settings menu, notification panel And USSD commands (for some operators). Let's look at each in detail.

2.1. Enabling via settings

This is the most secure method, as it allows you to set a network name and password. Instructions:

1. Open Settings → Wireless & networks → Hotspot & tethering.
2. Select Wi-Fi hotspot.
3. Activate the slider Wi-Fi hotspot.
4. Click Setting up an access pointto change the network name (SSID), password and range (2.4 GHz or 5 GHz - only available on this model 2.4 GHz).

Example settings for maximum compatibility:

• 🔒 Network name (SSID): Honor10Lite_Hotspot (without spaces and Cyrillic letters).
• 🔑 Password: at least 8 characters, with numbers and letters (e.g. WiFi1234!).
• 📶 Range: 2.4 GHz (the only available option).
• 🔄 Security: WPA2 PSK (the most reliable option).

2.2. Quick activation via the notification panel

If the access point is already configured, you can turn it on in two taps:

1. Swipe down from the top of the screen to open the notification panel.
2. Find the icon Access point (usually next to Wi-Fi and Bluetooth) and tap on it.
3. If there is no icon, click on the pencil (Edit) and add it to the panel.

⚠️ Attention: This option uses the last saved settings. If you changed the password or network name through the menu, they will be applied automatically.

2.3. Activation via USSD commands (for some operators)

Some mobile operators (eg Tele2 or Iota) allow you to manage internet sharing using special commands. This is useful if standard methods don't work due to data plan restrictions.

Example commands:

• 📞 To activate the distribution: *111*77# (For MTS) or *105*611# (For Beeline).
• 📵 To deactivate: *111*78# (For MTS).

⚠️ Attention: USSD commands may vary depending on your region and plan. Check your operator's website or personal account for up-to-date codes.

Via Settings|Via Notification Panel|USSD Commands|I Don't Use Distribution-->

3. Optimize Wi-Fi speed and stability

Even after successfully connecting the devices to the access point on Honor 10 Lite problems may arise: low speed, connection breaks or high pingHere's how to solve them.

3.1. Selecting the optimal Wi-Fi channel

By default, the phone automatically selects the channel for broadcasting, but in urban areas this often leads to interference. Manually setting the channel can significantly improve stability.

How to change the channel:

1. Go to Settings → Wireless & networks → Hotspot & tethering → Set up hotspot.
2. Select Additional settings (or Extended).
3. Find the item Wi-Fi channel and select one of the free ones (for example, 6 or 11).

To find out which channels are busy, use apps like WiFi Analyzer (available in AppGallery or APKPure for devices without Google services).

3.2. Limiting connected devices

Honor 10 Lite supports connection up to 8 devices simultaneously, but in practice, the speed drops noticeably with just 3-4 users connected. To limit the number of users:

1. In the access point settings menu, select Connected devices.
2. Click on Restrict access and set the maximum number (we recommend 3–4).

You can also block individual devices, if they are consuming traffic suspiciously:

• 📱 Open the list of connected devices.
• 🚫 Click on the desired device and select Block.

3.3. Configuring DNS to speed up the Internet

Sometimes low speed is not due to the phone itself, but to the operator's DNS servers. Replacing them with public ones (for example, Google DNS or Cloudflare) can speed up website loading.

How to change DNS on connected devices (e.g., a laptop):

1. Open Network Settings → Wi-Fi → Current Network Properties (on Windows).
2. In the field DNS server enter 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).
3. Save your changes and reconnect to the network.

4. Solving typical problems when distributing Wi-Fi

Even after proper configuration, the access point Honor 10 Lite may work unstably. Let's take a look the most common mistakes and ways to eliminate them.

4.1 Devices do not connect to the access point

If your phone is sharing Wi-Fi but other devices can't connect, check the following:

• 🔑 Password: Make sure you enter it correctly (case is important!).
• 📱 Operator restrictions: some tariffs block distribution (for example, MTS "For Laptop" or Beeline "Unlimited").
• 🔄 Reboot: Turn the access point off and on again.
• 📵 Airplane mode: check that it is disabled.

If the problem persists, try:

1. Reset network settings: Settings → System → Reset → Network reset.
2. Change security type with WPA2 on WPA (in the access point settings).

4.2. The access point turns off by itself

A common problem on Honor 10 Lite — automatic shutdown of distribution after 5-10 minutes. This is due to saving battery or background activity restrictions.

How to fix:

1. Open Settings → Applications → Applications.
2. Find Settings (system application) and select Battery.
3. Install No restrictions.
4. Repeat the steps for the application Access point (if it is on the list).

Also check your Wi-Fi sleep settings:

1. Go to Settings → Wireless & networks → Wi-Fi → Additional settings.
2. Disable the option Disable Wi-Fi in sleep mode.

4.3. Slow speed or connection interruptions

If the distribution speed is lower than expected (for example, with the tariff 100 Mbps gives out only 10–20 Mbps), the reasons may be the following:

If nothing helps, try alternative distribution methods:

• 🔌 USB modem: connect your phone to your computer via cable and turn it on USB modem in the settings.
• 📡 Bluetooth modem: slower than Wi-Fi, but more stable in conditions of interference.

What should I do if the operator blocks the distribution?

Some operators (eg. Tinkoff Mobile or SberMobile) block distribution on cheap plans. This can be circumvented using VPN apps (for example, 1.1.1.1 or ProtonVPN), but this may violate the terms of service. An alternative is to change your plan to one that allows tethering (usually plans labeled "Modem" or "Unlimited").

5. Video instructions: step-by-step setup

For clarity, we have prepared video with step-by-step instructions to set up an access point on Honor 10 LiteIt shows:

• 🎥 Enable seeding through settings and the notification panel.
• 🔧 Optimizing the Wi-Fi channel for stable operation.
• ⚡ Solving the problem of spontaneous shutdown.

📌 Video link: [Insert a link to YouTube or another hosting site in the actual article].

If the video is unavailable, please follow the text instructions in the previous sections. Please note that the interface may differ slightly depending on the version EMUI (on Honor 10 Lite (versions 9.0–9.1 are current).

6. Alternative methods of Internet distribution

If the default access point is unstable, consider alternative options:

6.1. Sharing via Bluetooth

A slower but more stable method. Suitable for connecting a single device (e.g., a laptop).

How to enable:

1. Activate Bluetooth on your phone and the target device.
2. In your phone settings, select Access Point and Tethering → Bluetooth Tethering.
3. Connect your device via Bluetooth and allow internet access.

⚠️ Attention: The speed is limited to ~3–5 Mbps, which is only enough for instant messengers or email.

6.2. USB modem for PC

The most stable way to connect your computer to the internet is through Honor 10 Lite. Only a USB cable is required.

Instructions:

1. Connect your phone to your computer via cable.
2. In your phone settings, select Access Point and Modem → USB Modem.
3. Wait for the drivers to install on your computer (usually this happens automatically).

Advantages of the method:

• 🔌 No speed loss (unlike Wi-Fi).
• 🔋 Less phone battery consumption.
• 🛡️ More secure (no risk of connecting third-party devices).

6.3. Using third-party applications

If standard methods are not sufficient, you can use Wi-Fi sharing apps, such as:

• 📲 Portable Wi-Fi Hotspot (available in AppGallery).
• 🌐 NetShare (requires root access for some functions).

⚠️ Attention: Third-party apps may request unnecessary permissions (such as access to SMS or contacts). Install them only from trusted sources.

7. Security when distributing Wi-Fi

Internet distribution via Honor 10 Lite opens potential vulnerabilities for attackers. The following measures will help protect your data:

7.1. Strong password

Use a password that is long at least 12 characters with a combination of:

• 🔢 Numbers (0–9).
• 🔤 Uppercase and lowercase letters (A–Z, a–z).
• 🔖 Special characters (!, @, # and others).

Example of a strong password: WiFi_Honor10!2026.

7.2. Hiding the network (SSID)

To prevent your access point from appearing on the public list of networks:

1. In the access point settings, select Additional options.
2. Activate the option Hide network.

Now only those who know the exact network name will be able to connect (SSID).

7.3. MAC address restriction

You can allow connection only to certain devices based on their MAC address:

1. Find out the MAC address of the device (on Windows: ipconfig /all (in the command line).
2. In the access point settings, find MAC address filter.
3. Add allowed addresses to the list.

⚠️ Attention: MAC addresses can be spoofed, so this method does not provide 100% protection, but it reduces the risk of unauthorized connections.

FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 10 Lite

Is it possible to share Wi-Fi from the Honor 10 Lite without a SIM card?

No, you need an active SIM card with a valid data plan to share your mobile data. However, you can share your data by connecting to another Wi-Fi network (for example, via Tethering → Wi-Fi, if the phone is connected to a router).

Why does the access point turn off after 10 minutes?

This is related to power saving settings. Disable battery saving mode for system apps (see section 4.2) or connect your phone to a charger—this will prevent data sharing from being interrupted.

How to increase the Wi-Fi range on the Honor 10 Lite?

The range depends on the phone's transmitter power and cannot be adjusted programmatically. However, it is possible:

• Place the phone in the center of the room.
• Remove obstacles (walls, metal objects).
• Use an external antenna (requires disassembling the phone and does not guarantee results).

Is it possible to share Wi-Fi from Honor 10 Lite to iPhone?

Yes, but connection issues may occur due to different security standards. Select the security type on your phone. WPA2 (Not WPA3), and on the iPhone, when connecting, press Join despite the "unsecured network" warning.

How much traffic does Wi-Fi distribution consume?

Traffic consumption depends on the activity of connected devices. For example:

• 📱 Browsing social media: ~50–100 MB/hour.
• 🎮 Online games: ~100–300 MB/hour.
• 🎥 Video streaming (720p): ~1–1.5 GB/hour.

You can track your consumption in Settings → Wireless & networks → Data usage.