Sharing the Internet from an Honor phone to a PC via Wi-Fi: Tele2 plan features and step-by-step setup

When you only have mobile internet at hand Tele2, but you urgently need to connect your laptop or desktop PC to the network, smartphone Honor becomes a lifeline. However, distributing traffic via Wi-Fi on devices of this brand has its nuances - from operator restrictions to firmware peculiarities Magic UIIn this article, we'll cover not only the standard procedure for activating an access point, but also hidden settings that will help you bypass common errors: from a lack of network access to blocking distribution from outside Tele2.

It is important to understand that technical capabilities yours Honor (whether it's a model Honor 10 Lite, Honor 20 Pro or fresh Honor 90) and tariff plan Tele2 directly affect connection stability. For example, some operator plans limit upload speed to 64 kbps or completely block the function Wi-Fi Hotspot Without any additional options. We'll cover in detail how to check these restrictions and what to do if your internet connection is cut or disconnects after 5 minutes.

If you've previously encountered a situation where your PC "sees" your phone's network but doesn't connect, or the connection keeps dropping, this article has a separate section on diagnosing these issues. You'll also learn how to optimize traffic consumption when distributing data so as not to exhaust the limit in an hour, and what alternative connection methods (USB, Bluetooth) can help if Wi-Fi refuses to work.

1. Compatibility check: Does your Honor support Wi-Fi hotspot?

Not all models Honor perform the function equally well Wi-Fi HotspotFor example, budget devices like Honor 8A or Honor 7S may have a limitation on the number of connected devices (often only 1-2), and the flagships of the series Honor Magic Supports up to 10 clients simultaneously. To avoid disappointment, please check first:

• 📱 Phone model: Go to Settings → About phone → ModelIf your device was released before 2019, a firmware update may be required for stable distribution.
• 📶 Firmware version: In the same menu About the phone check EMUI/Magic UI versionFor Wi-Fi distribution, the recommended version is not lower. EMUI 9.0 or Magic UI 3.0.
• 🔄 Availability of updates: Go to Settings → System → Software Update and install the latest patches. On some Honor models, after updating to Magic UI 7.0+, the "Power saving mode for Hotspot" option appears, which extends the hotspot operating time to 12 hours.

If your phone doesn't see the option Wi-Fi hotspot in the settings, this could mean:

• 🚫 Hardware limitation (rare, but occurs on older models).
• 🔧 Software glitch - try resetting your network settings (Settings → System → Reset → Reset network settings).
• 📵 Operator blocking — Tele2 may limit functionality on some plans (see below).

⚠️ Attention: On phones Honor with processors Kirin 710/710F (For example, Honor 10i, Honor 20 LiteAfter using Wi-Fi for a long time, the chipset may overheat. If your phone becomes hot, turn off the hotspot for 10-15 minutes.

2. Tele2 tariffs: what restrictions does the operator impose?

Even if yours Honor technically ready to distribute the Internet, Tele2 This feature may be blocked at the SIM card level. Here's what you need to know:

• 📊 Unlimited tariffs (for example, "My Unlimited", "Everything for 500") often have hidden restrictions: the distribution speed can be reduced to 128 kbps after 10-15 GB of traffic has been used up.
• 🔒 Tariffs with fixed traffic (for example, "My Online") can completely block distribution if the "Mobile Internet for devices" option is not enabled (cost ~150₽/month).
• ⏳ Time restrictionsSome plans automatically disable data sharing after 30-60 minutes. This prevents the phone from being used as a full-fledged router.

To check if it blocks Tele2 distribution on your tariff:

1. Open the "My Tele2" application or go to personal account.
2. Go to the section "My services" → "Internet".
3. Check if the "Internet Sharing" or "Hotspot" option is enabled. If it's not there, the feature is blocked.

⚠️ Attention: If you use Tele2 corporate SIM cardInternet tethering may be prohibited by company policy. In this case, even connecting to paid services won't help—approval from the IT department is required.

3. Step-by-step setup of an access point on Honor

If your plan is OK, let's move on to setting up your phone. These instructions apply to most models. Honor on EMUI 9.0 and newer (including Magic UI). Deviations may only occur in the names of menu items.

Step 1: Activate tethering mode

1. Open Settings (gear icon).
2. Go to the section Wireless Networks → Access Point and Modem (on some models the path may be Settings → Mobile network → Portable hotspot).
3. Tap on Wi-Fi hotspot.
4. Activate the slider in the upper right corner.

Step 2: Configure network settings

By default, the phone will assign a network name (SSID) of the form HONOR-XXXX and password. To avoid connection issues, we recommend:

• 🔑 Change network name: Use Latin characters without spaces (for example, HonorHotspot). Cyrillic characters in the SSID can cause errors on Windows PCs.
• 🔒 Set a strong password: Minimum 8 characters, with numbers and letters (eg. Tele2Honor2026). Avoid simple combinations like 12345678.
• 📡 Select range: If your Honor supports 5 GHz, select it for less interference. However, older laptops may not see networks in this range - in this case, leave 2.4 GHz.

Step 3: Connecting the computer

1. On your PC, open the list of available networks (the Wi-Fi icon in the tray).
2. Select your network Honor (For example, HONOR-1234).
3. Enter the password you specified on your phone.
4. If the connection does not occur, try disabling the antivirus on your PC (for example, Kaspersky or Avast sometimes new networks are blocked).

Step 4: Checking the connection

After connection:

• An icon will appear in the top bar on your phone. 📶→💻 (distribution is active).
• On your PC, open your browser and go to the website 2ip.ruto make sure that the IP address is issued by the operator Tele2.
• If pages don't load, check your PC's proxy settings: Settings → Network & Internet → Proxy - all sliders must be disabled.

⚠️ Attention: On phones Honor With Magic UI 6.0+ There's a bug: if you enable the hotspot and then put your phone into power-saving mode, the hotspot will turn off after 5 minutes. To avoid this, add the Settings app to the battery optimization exceptions (Settings → Battery → Launching apps → Settings → Allow).

netsh winsock reset
netsh int ip reset

4. Solving typical distribution problems

Even if everything is configured correctly, problems can still occur. Let's look at the most common scenarios and how to troubleshoot them.

Problem 1: The phone does not distribute Wi-Fi (the button is inactive or the icon is gray)

Possible causes and solutions:

• 🔌 No mobile internet: Check if data transfer is turned on (Settings → Mobile network → Data transfer). If the icon 4G/5G gray - restart your phone.
• 📵 The SIM card does not support data transfer.Insert the card into another phone and check if the internet works. If not, contact a dealer. Tele2 to replace the SIM card.
• 🔧 Settings error: Reset network settings (Settings → System → Reset → Reset network settings). Attention: This will delete all saved Wi-Fi networks!

Problem 2: The PC connects, but the speed is very low (0.1-1 Mbps)

This is a typical situation for tariffs Tele2 with "unlimited" internet. Reasons:

• 📉 Speed ​​throttlingYour carrier may be artificially limiting your upload speed. Check your traffic limit in your account.
• 📡 Interference on the airIf there are many Wi-Fi networks nearby, change the channel on your phone. To do this, select [Wi-Fi] in the access point settings. Band: 5 GHz (if supported).
• 🔋 Energy saving: On phones Honor In battery saving mode, data transfer speed may decrease. Disable it in battery settings.

To check the actual speed:

1. On your PC, open Speedtest.
2. Compare the results with the speed on your phone (run the test on Honor via browser).
3. If the speed is high on your phone but slow on your PC, the problem lies with your computer's Wi-Fi adapter drivers. Update them via device Manager.

Problem 3: The access point turns off by itself

A common complaint from owners Honor — the distribution ends after 5-30 minutes. Solutions:

• ⏱️ Inactivity timeout: In the access point settings, find the item Disable when idle and install Never.
• 🔋 Battery optimization: Add the Settings app to exceptions (Settings → Battery → Launch apps).
• 📴 Overheat: If the phone is hot, let it cool down for 10-15 minutes. Use the mode 2.4 GHz instead of 5 GHz - it heats up the chipset less.

5. Alternative ways to share internet with Honor

If Wi-Fi stubbornly doesn't work, try other methods of connecting your PC to the internet via your phone. Each option has its pros and cons.

Method 1: Sharing via USB (USB-ethernet)

Advantages:

• ⚡ Stable connection without interruptions.
• 🔋 Uses less battery power (charges via USB).
• 🛡️ No problems with interference like with Wi-Fi.

Flaws:

• 🖥️ A USB cable is required (preferably the original one).
• 🚫 Doesn't work if the driver is disabled on the PC RNDIS.

How to set up:

1. Connect your phone to your PC via USB.
2. On Honor In the access point settings, select USB modem.
3. On your PC, wait for the drivers to install (a restart may be required).
4. If the Internet does not appear, in Device Manager check if there is an exclamation mark next to Remote NDIS.

Method 2: Sharing via Bluetooth

Suitable for older PCs without Wi-Fi or with driver issues.

Pros:

• 🔄 Low power consumption (compared to Wi-Fi).
• 📶 Works even if the Wi-Fi adapter is broken.

Cons:

• 🐢 Very low speed (maximum ~3 Mbps).
• 🔋 My phone's battery drains quickly.

Instructions:

1. Turn on Bluetooth on your phone and PC.
2. Pair the devices (on your phone: Settings → Bluetooth, on PC: Settings → Devices → Bluetooth).
3. On your phone, in the hotspot settings, select Bluetooth modem.
4. On your PC, in the notification bar, select connection via Bluetooth network connection.

Method 3: Using third-party applications

If standard means Honor don't work, you can try apps like PdaNet+ or ClockworkMod TetherThey bypass some operator restrictions, but:

• ⚠️ They may require root rights (which will void the warranty).
• 🔍 Tele2 may block their use as a violation of tariff rules.
• 🛡️ Risk of catching a virus (download only from Google Play).

⚠️ Attention: Applications that use data sharing to bypass operator restrictions (for example, via a VPN or proxy) may result in SIM card blocking for violating the user agreement. Tele2 actively combats such methods, especially on tariffs with unlimited traffic.

6. Optimizing distribution: how to save traffic and battery

Sharing your internet connection via your phone is not only convenient but also cost-effective, both in terms of data usage and battery life. These solutions will help extend battery life and reduce data consumption.

Saving traffic

• 📵 Disable background updates on PC: Settings → Update & Security → Advanced Options → Delivery Optimization (disable downloading updates from other PCs).
• 🎵 Limit video streaming: Select quality on YouTube 480p, on Netflix - AverageYou can enable it in the hotspot settings on your phone. Speed ​​Limit (if there is such an option).
• 📱 Use traffic compression: In the browser Chrome turn on Saving traffic (Settings → Traffic Saver).

Saving battery life

• 🔋 Connect your phone to the chargerSharing Wi-Fi consumes approximately 20-30% of the battery per hour. If you don't have access to a power outlet, reduce your screen brightness to minimum.
• 🌡️ Control the temperatureIf your phone gets hotter than 40°C, turn off the data transfer for 10 minutes. Use the 2.4 GHz instead of 5 GHz - it heats up the processor less.
• ⚡ Disable unnecessary background processes. Close all applications except those needed for work. Honor this is done through Settings → Applications → Running.

Distribution security

A public hotspot is a ripe target for hackers. To protect your data:

• 🔐 Use a complex password (see section 3).
• 🔄 Change your password once a week, if you often share the Internet in public places.
• 🛡️ Turn on the firewall on your PC and turn off file sharing (Settings → Network & Internet → Sharing options).
• 📵 Turn off the access pointwhen it is not needed. Constantly active Hotspot makes your phone vulnerable to attacks.

7. Comparison with other operators: why might Tele2 block data sharing?

Tele2 It's not the only operator that imposes restrictions on internet tethering, but its policy is one of the strictest. For comparison:

Why Tele2 so strict?

• 📉 Fighting traffic resellersThe operator is cracking down on those who buy cheap tariffs and resell internet through routers.
• 📡 Network congestionIn areas with poor coverage, distributing data from phones puts additional strain on towers.
• 💰 Incentives for purchasing expensive tariffs: The distribution option is often only included in plans starting from 600₽/month.

If you often share the Internet and Tele2 If this doesn't suit you, consider:

• 🔄 Change of operator on MTS or Megaphone (distribution is allowed there by default).
• 📶 Buying a USB modem (For example, Huawei E8372) with an unlimited tariff.
• 🌐 Using public Wi-Fi (for example, in cafes or coworking spaces) to save mobile traffic.

8. Frequently Asked Questions (FAQ)