Modern smartphones such as Honor 8X, often become a full-fledged replacement for stationary modems, especially when there is an urgent need to provide a computer with network access. Operator Tele2 offers flexible tariff plans that allow you to use mobile internet as the primary connection for your laptop or PC. However, simply activating this feature doesn't always guarantee stable speeds or correct device detection by the computer.
In this article, we will take a detailed look at the process of turning your smartphone into a fully-fledged Wi-Fi routerYou'll learn about hidden frequency range settings that are critical for older network cards, and understand how to properly configure traffic limits to avoid falling into the red. We'll also cover the technical nuances of security protocols and their impact on data transfer speeds.
Using your phone as a modem is convenient, but it requires understanding some of the technical features of the operating system. Android and shells EMUIIncorrect configuration can result in a computer seeing the network but not obtaining an IP address, or the connection speed may be unreasonably slow. Let's review all the configuration steps step by step.
⚠️ Attention: The EMUI menu interface may vary slightly depending on the system update version. If you can't find the menu item, try searching through the settings or consult the official user manual for your specific firmware version.
Preparing your SIM card and checking your tariff plan
Before you begin technical configuration of the access point, you need to make sure that the SIM card itself is working correctly. Tele2, like many others, may limit data sharing on certain plans or require additional features to legally use your smartphone as a modem. Check your balance and remaining package data through the app or via USSD.
Make sure your phone's mobile data connection is enabled. Without an active 4G/LTE connection, tethering will not be possible, even if the hotspot slider is enabled. Insert the SIM card into the correct slot if your device supports dual cards, as Honor 8X may limit 4G speed in the second slot.
It's important to understand the difference between unlimited plans and plans with a gigabyte package. Unlimited plans often limit speeds after a certain threshold or block P2P protocols, which can affect the operation of certain programs on your computer. For stable PC performance, it's better to use plans with higher traffic volumes.
- 📱 Check if the data transfer service is active in your operator's personal account.
- 📶 Make sure your phone has a 4G/LTE signal, not just 3G or E.
- 💰 Find out the terms of your plan regarding internet sharing with other devices.
- 🔋 Charge your phone to at least 50% before starting active distribution.
Activating Wi-Fi Hotspot on Honor 8X
The process of enabling modem mode in smartphones Honor It's standardized, but has its own peculiarities in the settings menu. You need to go to the section Settings, then select the item Wireless networks or find the icon directly Modem modeIn some firmware versions, this item is located in a separate menu. Connections.
Once you enter the menu, find the switch Wi-Fi hotspotBefore activating it, we recommend tapping the network name or the settings button to configure the settings. By default, the system may suggest a standard network name containing the phone model and a random password. Change these to something more meaningful.
Pay special attention to the frequency range selection. In the access point settings Honor 8X There's often an option to choose between 2.4 GHz and 5 GHz. The 5 GHz band offers faster speeds and less interference, but older laptops or PCs with outdated Wi-Fi adapters may simply not detect the network. If your computer can't find the network, switch to 2.4 GHz.
☑️ Pre-launch check
Once the hotspot is enabled, a corresponding icon will appear in the status bar on your phone. Your computer can now search for a new network. If you're using Windows 10 or 11, the connection process is standard: click the Wi-Fi icon, select the network, and enter the password.
⚠️ Attention: When you first connect, Windows may ask you about your network type. Select "Private" to make your computer visible on the network, which is necessary for some applications that use a local connection.
Configuring security settings and network name
The security of your personal network is a priority. In the access point settings Honor 8X A choice of encryption protocol is available. It is recommended to use WPA2 PSK, as it is the most reliable and compatible standard currently available. WEP is outdated and easily cracked, and WPA3 may not be supported by older devices.
Your password should be complex enough to prevent neighbors from connecting to your internet and slowing down your speed. Use a combination of upper- and lower-case letters and numbers. The password must be at least 8 characters long. Write it down in a safe place or use a password manager.
You can also change the network name (SSID). Avoid using generic names like "Honor 8X," as this will reveal your device model to potential attackers. It's better to give the network a neutral name that won't attract unnecessary attention, such as "Home_Network_5" or any other generic name.
| Parameter | Recommended value | Description of influence |
|---|---|---|
| Security protocol | WPA2 PSK | Maximum compatibility and data protection |
| Frequency range | 2.4 GHz / 5 GHz | 5 GHz is faster, 2.4 GHz has a longer range |
| Maximum connections | 4-8 devices | Limits the number of simultaneous clients |
| Shutdown timeout | 10 minutes | Saves battery when there are no clients |
Why can't the network be left open?
An open network (without a password) allows anyone within range to connect to your internet. This will not only reduce your speed but also allow attackers to intercept your data if websites don't use a secure HTTPS connection. Furthermore, all internet activity will be logged using your IP address, which could create legal issues.
Troubleshooting connection and speed issues
Users often encounter a situation where their phone is broadcasting Wi-Fi, but the internet connection on their computer isn't working. First, check if the phone itself has internet access even though Wi-Fi is disabled. If pages don't load, the problem is with your carrier. Tele2 or in the mobile network settings (incorrect access point name).
If everything works on your phone but your PC isn't receiving an IP address, try resetting your computer's network settings. You can do this in the Windows command line with the command ipconfig /release And ipconfig /renewDeleting the saved network on your computer and reconnecting with the password also helps.
Low speed may be caused by overheating of the smartphone. Honor 8X When using Wi-Fi or 4G networks, the phone can become very hot, leading to throttling (reduced processor and modem performance). Remove the case, place the phone on a hard surface, or point a fan at it.
- 🔄 Restart your phone and computer to reset network services.
- 📡 Check your Tele2 APN settings in the mobile network menu.
- 🔥 Monitor the temperature of your phone while it's running.
- 📉 Limit background downloads on the connected computer.
Save traffic and control connected devices
Mobile internet, even with large packages, is not unlimited. In the hotspot settings Honor 8X There's a useful feature called "Device Management" or "Connected Devices." There you can see a list of all the gadgets currently using your internet connection.
You can block an unknown device directly from this menu. This is especially useful if you suspect your neighbors are using your Wi-Fi. Simply tap the device's name and select "Block." You can also set a traffic limit, which will automatically disable tethering when reached.
To save data on your computer, disable automatic Windows updates and cloud storage services (OneDrive, Dropbox) when using a mobile data connection. In Windows 10/11, you can set a metered connection by telling the system that you're using mobile data.
⚠️ Attention: Telecom operators can track the TTL (Time To Live) of packets. If you're tethering, the TTL changes, and the operator may detect that you're using your phone as a router. On some plans, this can lead to blocking or additional charges. Use dedicated apps to change the TTL only if you're confident in your actions and your plan's terms.
The impact of the distribution mode on the battery and the system
Hotspot mode is one of the most power-hungry processes on a smartphone. The Wi-Fi module operates in constant data transfer mode, and the processor actively processes network packets. Honor 8X It is equipped with a 3750 mAh battery, which is average, but with active distribution the charge can drain very quickly - up to 20-30% per hour.
Constantly using tethering mode causes heating and cooling cycles, which can negatively impact battery life over time. Lithium-ion batteries degrade faster at high temperatures. Avoid keeping your phone connected to a hotspot for 24 hours straight.
If you need to share internet for an extended period, such as while traveling or working outside the office, consider using an external power bank or connecting your phone to a power outlet using its original charger. However, keep in mind that charging and active Wi-Fi simultaneously generate heat.
Is it possible to share Wi-Fi via Bluetooth?
Technically, this is possible, but Bluetooth modem speeds are extremely low (around 1-2 Mbps under ideal conditions). This is only sufficient for text messaging, but videos or pages with graphics will take a very long time to load. Use Bluetooth modem only as a last resort, when other methods are unavailable.
Alternative connection methods: USB and Bluetooth
If the Wi-Fi connection is unstable or the computer does not have a wireless module, Honor 8X Allows you to share the internet via a USB cable. This method provides a more stable connection and lower latency (ping), which is important for online gaming or video calls. Furthermore, your phone will be charged via your computer.
To activate the USB modem, connect your phone to the PC with a cable, wait for the drivers to install (usually happens automatically), then in the menu Modem mode turn on the switch USB modemThe computer will detect a new network connection, similar to a wired Ethernet connection.
A Bluetooth modem is another option that uses less power than Wi-Fi but is slower. It can be useful for connecting older laptops or tablets without Wi-Fi. The pairing process takes longer, but the connection is stable over short distances.
Why doesn't the computer detect the Honor 8X USB modem?
Most often, the problem lies with the cable. Cheap "charging-only" cables don't have data lines. Use the original cable or a certified replacement. Also, check if the drivers are installed. HiSuite Or the basic Android ADB drivers on your computer. Try a different USB port, preferably USB 2.0, as USB 3.0 sometimes causes compatibility issues.
How to change the APN for Tele2 on the Honor 8X?
Go to Settings -> Wireless networks -> Mobile network -> Access Point Names (APNs)Click the menu (three dots) and select "Reset to default settings" or create a new point. For Tele2, the name is: Tele2 Internet, APN: internet.tele2.ru. Save and select this point as active.
Does Wi-Fi sharing reduce the lifespan of your phone?
The feature itself is software-safe. However, physical wear and tear occurs due to heat and charge-discharge cycles. If the phone is constantly hot, this accelerates battery degradation and can affect the adhesive bonds inside the case. Allow the device to cool down and avoid using it in modem mode in direct sunlight.
Is it possible to share Wi-Fi if the phone is connected to Wi-Fi?
On most modern smartphones, including Honor 8X With Android 8/9/10, the "Wi-Fi repeater" feature (distributing received Wi-Fi) is often unavailable using standard tools. The phone usually prompts you to turn off Wi-Fi and switch to a mobile network for distributing. Root access or specialized apps are required to implement the repeater feature.