How to share internet from your phone to your computer via Tele2 Wi-Fi – free and error-free

Modern smartphones can easily be turned into full-fledged Wi-Fi routers, allowing you to share mobile internet with your laptop, PC, or tablet. If you're using a plan Tele2 If you have an unlimited or larger data plan, you can save money by purchasing a separate USB modem or router. However, this method has its own set of nuances, from operator restrictions to configuration differences across different versions. Android And iOS.

In this article you will find step-by-step instructions For both platforms, a table of Tele2 tariff compatibility with tethering, and solutions to common issues—from the "No Internet Access" error to slow speeds. We'll also discuss how to bypass potential operator blocking. by legal means and not lose traffic in vain.

⚠️ Important: Tele2 may limit internet tethering on some plans (e.g., "My Tele2" or "For Our Own"). Before setting up, check the terms in your personal account or via USSD request. *159#If your plan specifies "Modem sharing prohibited," the hotspot won't work, even after being enabled on your phone.

1. Preparation: What you need to check before distributing the Internet

Before enabling the hotspot, make sure your Tele2 plan supports this feature. The operator divides traffic into two types:

• 📱 Regular traffic — for surfing from a phone (allowed on all tariffs).
• 🖥️ Modem traffic — for distribution to other devices (may be limited or paid).

To avoid unpleasant surprises such as money being withdrawn or internet being blocked, follow these steps:

Make sure there is enough money in your account (minimum balance is 10₽)

Check remaining traffic through *105# or the "My Tele2" app

Disable VPN (some services conflict with distribution)

Charge your phone to at least 30% (distributing power drains the battery quickly)

Make sure the Wi-Fi adapter is enabled on your PC (tray indicator)

-->

If you use Android, update the firmware to the latest version - in older versions (below Android 10) there may be bugs with Internet distribution. iPhone Make sure you have iOS 14 or later installed.

2. How to share internet from an Android phone (Samsung, Xiaomi, Honor, etc.)

The instructions are suitable for most smartphones Android 8.0 and newer. The interface may differ slightly depending on the model, but the principle is the same.

Step 1. Open Settings → Wireless & networks → Tethering & portable hotspot (or Access point and modem). On some phones (for example, Xiaomi) the path will be: Settings → Connections and Sharing → Hotspot.

Step 2. Tap on the item Wi-Fi hotspot and configure the settings:

• 🔄 Network name (SSID) - come up with something unique (for example, Tele2_Hotspot_YourName).
• 🔒 Security type — choose WPA2-PSK (the most reliable).
• 🔑 Password — minimum 8 characters (use numbers and letters).

Step 3. Save the settings and turn on the hotspot using the slider. A notification will appear on the screen indicating the number of connected devices.

What should I do if there is no "Modem Mode" option?

On some phones (eg. Huawei or Honor) Internet sharing may be hidden. Try:

1. Enter the query "access point" in the settings search.

2. Log in Settings → System → Advanced → Access Point.

3. If the item is missing at all, update the firmware or reset the network settings (Settings → System → Reset → Reset network settings).

⚠️ Attention: On phones Samsung With One UI The access point may automatically turn off after 5-10 minutes of inactivity. To avoid this, go to Settings → Device → Developer Mode (if it is not there, tap 7 times on the build number in About the phone) and disable the option Disable mobile internet when idle.

3. How to share internet from iPhone (iOS) to a computer

On iPhone The process is simpler, but there is a limitation: you can connect no more than 5 devices (on Android (usually 8-10). Apple also blocks sharing if the phone doesn't have a SIM card or it's inactive.

Step 1. Open Settings → Tethering (or Cellular → Personal Hotspot on older versions of iOS).

Step 2. Turn on the slider Allow othersHere you can also change your password (it is complex by default, but it is best to remember it or write it down).

Step 3. On your computer, find the network with your name. iPhone (For example, iPhone (YourName)) and connect by entering the password.

🔹 iOS Features:

• 🔋 The access point automatically turns off if no devices are connected to it for 90 seconds.
• 📶 On iPhone 12 and newer is supported Wi-Fi 6, which speeds up distribution to 30–50 Mbit/s (with a good Tele2 signal).
• 🚫 If enabled Low power mode, the distribution may work unstable.

4. Computer settings for connecting to an access point

Even if your phone is distributing Wi-Fi correctly, you may still have connection issues on your PC. Let's look at how to set this up. Windows 10/11 And macOS.

For Windows:

1. Click on the Wi-Fi icon in the lower right corner (tray).
2. Select your phone's network (you specified the name earlier).
3. Enter the password and check the box Connect automatically.
4. If the connection does not occur, right-click on the network → Troubleshooting.

For macOS:

1. Open System Preferences → Network.
2. Select Wi-Fi in the left menu and click Connect to another network.
3. Enter the network name (SSID) and password manually if automatic connection does not work.

⚠️ Attention: If you see the "No Internet Access" error on your PC, but your phone shows a connected device, try:

• 🔄 Restart your phone and computer.
• 📵 Temporarily disable Windows Firewall (Control Panel → Firewall → Turn on or off).
• 🔧 Reset the network on your phone (Settings → System → Reset → Reset Wi-Fi, mobile networks, and Bluetooth).

5. Tele2 tariffs and restrictions on internet distribution

Tele2 divides its plans into those that allow internet tethering and those that block it or limit traffic. Below is the current table as of 2026 (but conditions are subject to change; check your personal account).

If your plan doesn't support data sharing, but you urgently need internet access on your PC, you can temporarily activate the "Modem Access" option via a USSD request. *111*77# (cost - from 50₽/day).

⚠️ Attention: Tele2 may block data sharing if you're using it excessively (for example, downloading torrents or streaming 4K video). In this case, the operator may:

• 📉 Limit speed to 64 kbps.
• 🚫 Completely disable modem traffic until the end of the month.
• 💰 Write off money for "exceeding the limit" (even if it is not included in the tariff).

6. Why is the internet slow when sharing from a phone?

Upload speeds are always lower than the direct mobile internet speed on the phone. This is due to:

• 📡 Operator restrictions — Tele2 may artificially reduce the speed of modem traffic.
• 📱 Hardware limitations of the phone — a weak processor cannot cope with routing.
• 🖥️ PC settings — background Windows updates or antivirus software are eating up your traffic.

How to speed up distribution:

1. Disable background apps on your phone (especially instant messengers and cloud services).
2. Switch the network on your phone 4G on 3G (sometimes this paradoxically increases speed).
3. On your PC, turn off automatic Windows updates (Settings → Update & Security → Advanced options → Pause updates).
4. Use 5 GHz Wi-Fi (if your phone supports it). To do this, select Band: 5 GHz.

7. Alternative ways to share internet from Tele2

If Wi-Fi hotspot is not working or is limited, try these methods:

1. Via USB cable (for Android only)

• 🔌 Connect your phone to your PC via USB.
• Turn it on in your phone settings USB modem (Settings → Wireless & networks → Tethering & portable hotspot → USB tethering).
• 🖥️ Install the drivers on your PC (Windows usually installs them automatically).

✅ Pros: More stable Wi-Fi, uses less battery.

❌ Cons: The phone must be constantly connected to the PC.

2. Via Bluetooth

• 🔵 Turn on Bluetooth on your phone and PC.
• Pair your devices (Settings → Bluetooth → Search for devices).
• Turn on your phone Bluetooth modem in the modem mode settings.

✅ Pros: low battery consumption.

❌ Cons: the speed does not exceed 2–3 Mbit/s (only for mail and instant messengers).

3. Via repeater apps (root/Android only)

Apps like NetShare or PdaNet+ allow you to bypass operator blocking, but:

• 🛡️ Required root rights (risk of losing warranty).
• ⚠️ They may violate Tele2 rules (SIM card blocking is possible).
• 🐢 The speed is often lower than with standard distribution.

8. Common mistakes and their solutions

Let's look at typical problems and how to fix them.

⚠️ Attention: If websites don't open on your PC after connecting to a hotspot, but instant messaging apps work, there may be a DNS issue. Try manually entering Google's DNS:

1. On Windows: Control Panel → Network → Change adapter settings → Wi-Fi Properties → IPv4 → Use the following DNS: 8.8.8.8 and 8.8.4.4.
2. On macOS: System Preferences → Network → Wi-Fi → DNS → Add servers 8.8.8.8 and 8.8.4.4.

FAQ: Answers to Frequently Asked Questions

Is it possible to share Tele2 internet for free if tethering is prohibited by my plan?

No, if the plan terms and conditions prohibit this, the hotspot will not work. This restriction can only be circumvented by:

• By connecting the paid option "Modem access" (*111*77#).
• By changing your tariff to one where distribution is allowed (for example, "Super Online").

Using a VPN or special applications may result in your SIM card being blocked.

How many devices can be connected to a Tele2 hotspot?

It depends on the phone:

• Android: usually 8-10 devices (on Samsung — up to 5 by default, but can be increased through the engineering menu).
• iPhone: maximum 5 devices (iOS limitation).

However, Tele2 may limit the number of devices at the network level - if more than 3-4 devices are connected, the speed will drop.

Why is Tele2 blocking internet tethering?

The operator justifies this as follows:

• 📊 Network congestion — modem traffic creates a large load on base stations.
• 💰 Additional income — distribution is often used to bypass tariff restrictions (for example, downloading torrents).
• 🛡️ Security - open access points can be used for illegal activities.

In practice, blocking most often affects tariffs with cheap unlimited data (for example, "My Tele2").

How can I check how much traffic was spent on distribution?

Tele2 doesn't separate statistics for "regular" and "modem" traffic in your personal account. To track your usage:

1. On Android: install the application NetGuard or GlassWire - They show traffic for each application, including the access point.
2. On iPhone: go to Settings → Cellular → Statistics (but modem traffic is not separated here).
3. A universal method: turn off mobile Internet on all devices except your PC and measure the consumption through *105# before and after the session.

Is it possible to share Tele2 internet abroad?

Yes, but:

• 🌍 When roaming, distribution is usually is blocked or charged at a higher rate (up to 500₽/MB).
• 📵 Even if the access point is turned on, the speed will be limited to 128 Kbps.
• 💳 It is recommended to purchase a local SIM card or activate the "Travel Easy" option (*155*4#).