How to connect the Samsung SCX-2070 printer to Wi-Fi: a complete guide with all the details

Wireless printer connection Samsung SCX-2070 Connecting to a Wi-Fi network eliminates the clutter of wires and allows you to print from any device in your home or office. However, many users encounter difficulties: the router doesn't detect the printer, drivers refuse to install, or printing errors occur. In this article, we'll look into these issues. all connection methods — from standard WPS to manual configuration via the control panel, as well as typical problems and their solutions.

Model SCX-2070 It's a budget monochrome Wi-Fi-enabled MFP (multifunctional device), but its interface isn't nearly as intuitive as its modern counterparts. For example, it lacks a touchscreen, and menu navigation is accomplished via physical buttons. This requires careful attention when entering data—one mistake in the network name, and the connection won't work. Furthermore, Wi-Fi security protocol On older routers, the printer may not support it, which can also cause problems.

If you've never set up network devices before, don't worry: we'll walk you through the process. And for experienced users, we've prepared Unique life hacks for speeding up connections and bypassing router limitations with non-standard settings.

1. Preparing for connection: what to check before starting setup

Before starting setup, ensure all system components are ready to use. Skipping this step is the main reason for 70% of connection failures.

First, check router and printer compatibility. Device Samsung SCX-2070 supports Wi-Fi standards 802.11b/g/n on frequency 2.4 GHzIf your router only works in the range 5 GHz (for example, some models ASUS RT-AX or TP-Link Archer AX), the printer simply won't be able to connect. The solution is to enable the mode 2.4 GHz or use a dual-band router.

Second, update your printer's firmware. Outdated firmware may contain bugs that interfere with the Wi-Fi connection. You can check the version in the printer menu: Menu → System Setup → Firmware VersionThe latest firmware can be downloaded from official Samsung website (Support section).

• 🔌 Nutrition: The printer must be plugged into a power outlet and in the ready mode (indicator Power (lights up green).
• 📡 Location: The distance to the router is no more than 5 meters (walls and furniture weaken the signal).
• 🔒 Wi-Fi Password: Write it down in advance - it's easy to make a mistake when entering it manually on the printer panel.
• 💻 Computer/Laptop: must be connected to the same Wi-Fi network as the printer.

⚠️ Attention: If your router uses hidden network (SSID), printer SCX-2070 won't be able to connect to it. You'll have to temporarily make the network visible or use alternative methods (such as WPS).

2. Method 1: Quick connection via WPS (recommended)

Technology Wi-Fi Protected Setup (WPS) Allows you to connect your printer to the network without entering a password—just press a button on the router. This is the simplest method, but it only works if:

• ✅ The router supports WPS (usually there is a button with the inscription WPS or the 🔄 icon).
• ✅ The WPS function is enabled in the router settings.
• ✅ The printer is within network range.

Instructions:

1. Press the button on the printer Menu, then go to Network → WLAN → WPS.
2. Select Push Button (push-button method).
3. For 2 minutes press the button WPS on the router (usually it blinks).
4. Wait for the message Connected on the printer display.

If connection failed:

• 🔄 Restart your router and printer.
• 🔧 Check if WPS is enabled in the router's web interface (usually in the section Wi-Fi → WPS).
• ⏱️ Make sure the WPS button is pressed within 2 minutes of activating the mode on the printer.

⚠️ Attention: Some routers (eg. Zyxel Keenetic) require WPS to be activated in the web interface beforehand. Without this, the button on the device won't work.

3. Method 2: Manual Wi-Fi setup via the printer control panel

If WPS isn't supported or doesn't work, you'll have to enter your network details manually. This method is more complex but more secure—especially for office networks with non-standard security settings.

Step-by-step instructions:

1. On the printer, press Menu → Network → WLAN → Setup Wizard.
2. Select your network from the list (if it is not there, check the visibility of the SSID in the router settings).
3. Enter the Wi-Fi password using the buttons ← → ↑ ↓ And OK. Symbols are displayed as asterisks (*).
4. Confirm your entry and wait for the connection to complete. The printer's IP address will appear on the display (e.g. 192.168.1.105).

Difficulties with manual input:

• 🔠 Password errors: The printer doesn't indicate which character was entered incorrectly. If this fails, try again.
• 🌐 Invisible Network: If the SSID is hidden, select Manual Setup and enter the network name and password manually.
• 🔒 Unsupported encryption type: The printer only works with WPA2-PSK (AES)If the router uses WPA3 or TKIP, change the settings.

4. Method 3: Connecting via USB cable (alternative method)

If Wi-Fi is persistently unresponsive, you can temporarily connect the printer to your computer via USB, install the drivers, and then reconfigure it to the wireless network. This method is useful if:

• 🖨️ I urgently need to print a document, but Wi-Fi is not set up.
• 🔧 The printer firmware needs to be updated (via USB is more reliable).
• 📶 The router blocks new devices (for example, by MAC address).

Instructions for Windows:

1. Connect the printer to your PC via USB cable (included).
2. Download the driver from Samsung website (select model SCX-2070 and your OS).
3. Install the software by following the installation wizard. During the installation, select the option Wireless connection.
4. After installing the drivers, disconnect the USB cable. The printer will automatically switch to Wi-Fi mode.

For macOS:

• Use the built-in utility Printers & Scanners (V System settings).
• Add a printer via IP address (if known) or select from the list of available devices.

⚠️ Attention: When connected via USB, some features (such as network scanning) may not be available until the printer switches to Wi-Fi mode.

What to do if the drivers are not installed?

If the installer gives an error, try:

1. Run it as administrator (right-click → “Run as administrator”).

2. Disable your antivirus (it may block the installation).

3. Remove old printer drivers through Devices and Printers in Windows.

4. Use the driver for the model SCX-3400 - it is often compatible with SCX-2070.

5. Setting up the printer on devices (PC, smartphone, tablet)

Once your printer is connected to Wi-Fi, you need to add it to the devices you plan to print from. The process varies depending on your operating system.

For Windows 10/11:

1. Open Settings → Devices → Printers & Scanners.
2. Click Add a printer or scanner.
3. Select Samsung SCX-2070 from the list. If it is not there, click The printer you need is not listed. and enter the IP address manually.

For Android:

• Install the application Samsung Mobile Print from Google Play.
• Launch it and select the printer from the list of available devices.
• Follow the on-screen instructions to print or scan.

For iOS (iPhone/iPad):

• Connect to the same Wi-Fi network as your printer.
• Open the document, click Share → Print.
• Select Samsung SCX-2070 from the list of printers.

6. Troubleshooting: Why the printer won't connect to Wi-Fi

Even with proper setup, errors can still occur. Let's look at the most common issues and their solutions.

The printer does not find the network:

• 📶 Check that the router is broadcasting in the range 2.4 GHz (the printer does not support 5 GHz).
• 🔌 Restart your router (turn it off for 30 seconds).
• 📡 Reduce the distance between the printer and the router.

The printer connects but does not print:

• 🖨️ Check the print queue on your PC: sometimes documents get stuck. Open Control Panel → Devices and Printers → View print queue.
• 🔧 Update your printer driver.
• 🔒 Make sure your firewall or antivirus software is not blocking communication with the printer.

Connection keeps getting lost:

• 🔄 Assign to printer static IP address in the router settings (DHCP reservation).
• 📶 Change the Wi-Fi channel in the router settings (for example, from Auto on 6 or 11).
• ⚡ Check the printer's power supply - unstable voltage can reset the settings.

⚠️ Attention: If your printer stops connecting after updating your router firmware, try rolling back the firmware to the previous version. Some router models (for example, TP-Link Archer C7) after the update, they change security settings, which blocks old devices.

7. Additional settings: how to improve printer performance over Wi-Fi

Once successfully connected, you can optimize your printer for convenience and safety.

Assigning a static IP:

This will prevent interruptions if the router changes the printer's IP address. Instructions:

1. Find out the MAC address of the printer (print a test page through Menu → Reports → Network Configuration).
2. Go to your router settings (usually 192.168.1.1).
3. Find the section DHCP Reservation or Static Lease.
4. Add a new rule by specifying the printer's MAC address and the desired IP (e.g. 192.168.1.200).

Setting up password access:

To restrict access to the printer, enable authentication:

1. On the printer: Menu → System Setup → Admin Setup → Password.
2. Set a password (the field is empty by default).
3. When connecting from a PC or smartphone, you will now need to enter this password.

Firmware update over the network:

If the printer is already connected to Wi-Fi, the firmware can be updated without USB:

1. Download the latest version from the Samsung website.
2. Go to the printer's web interface (enter its IP address in the browser).
3. Go to the section Firmware Update and upload the file.

How do I reset my printer to factory settings?

If your printer is frozen or won't save settings, reset it:

1. Turn off the printer.

2. Press and hold the button Cancel (or Stop) and turn on the power.

3. Hold the button for 10-15 seconds until all indicators flash.

4. After rebooting, the settings will be reset.

Attention: After the reset, you will have to set up Wi-Fi again!

8. Frequently Asked Questions (FAQ)

Is it possible to connect the Samsung SCX-2070 to Wi-Fi without a router (in Ad-Hoc mode)?

No, this model does not support the mode Ad-Hoc (direct connection to a PC). A router or access point is required for Wi-Fi operation.

The printer connects to Wi-Fi, but won't print from my phone. What should I do?

Check:

• Is the application installed? Samsung Mobile Print (for Android) or is it enabled AirPrint (for iOS).
• Are your phone and printer connected to the same Wi-Fi network?
• Is the firewall on the router blocking printing?

How to find out the printer's IP address after connection?

There are three ways:

1. Print a test page through Menu → Reports → Network Configuration.
2. View the list of devices in the router's web interface.
3. In Windows: Control Panel → Devices and Printers → Printer Properties → Ports.

Can the printer be used with Powerline adapters (via power lines)?

Yes, but only if the adapters create a network bridge with your Wi-Fi router. Powerline adapters themselves don't replace Wi-Fi, but they can extend the range of the network to which the printer is connected.

Why is my printer printing slowly over Wi-Fi?

Possible reasons:

• Weak Wi-Fi signal (check the signal strength on the printer).
• The router channel is overloaded (change the channel in the settings).
• Low printer performance (select the mode in the driver settings) Quick Print).