How to find out which devices are connected to a Tenda router's Wi-Fi: all the methods

Have you noticed your internet has slowed down, or do you suspect that someone else is using your Wi-Fi? Perhaps you simply want to control which devices are using your network. In any case, checking the list of devices connected to your router Tenda — this is the first step to diagnosing problems or ensuring security. Fortunately, there are several ways to do this, and most of them don't require any specialized knowledge.

In this article, we'll cover all the current methods: from the standard router web interface to mobile apps and third-party utilities. We'll pay special attention to the nuances of popular models. Tenda (For example, N301, AC6, FH1201), and we'll also explain why devices may sometimes display incorrectly. If you've never accessed your router settings before, don't worry: we'll walk you through each step in detail, with images and troubleshooting tips.

Before you begin, make sure your computer or smartphone is connected to the network. Tenda — without this, access to the settings will be impossible. Also, check that you have the login details for the control panel (usually this is a combination admin/admin (Or it's listed on the router's sticker.) If you changed the password and forgot it, you'll need to reset the router to factory settings—we'll cover this at the end of the article.

Method 1: View devices via Tenda web interface

The most reliable and universal method is to use the router's built-in control panel. It works on all models. Tenda, regardless of the year of manufacture, and does not require any additional software. The main requirement is knowing the router's IP address and login information.

To open the web interface:

1. Open any browser (Chrome, Firefox, Edge) on a device connected to Wi-Fi Tenda.
2. In the address bar, enter 192.168.0.1 or tendawifi.com (for new models) If the page doesn't open, try 192.168.1.1.
3. Enter your login and password (default - admin in both fields, if you haven't changed them).

After logging in, you'll need to find the section with the list of devices. Depending on the model, Tenda the path may differ:

• 📌 For N series routers (N301, N300, N312): go to Advanced → DHCP → DHCP Clients List.
• 📌 For AC models (AC5, AC6, AC10): open Wireless → Wireless Client List.
• 📌 For mesh systems (Nova MW3, MW6): the section is called Network → Connected Devices.

In the table you will see:

• 🔹 IP address devices (for example, 192.168.0.102).
• 🔹 MAC address (unique identifier, for example, 00:1A:2B:3C:4D:5E).
• 🔹 Host name (if the device transmits it, for example, iPhone-12-Pro).
• 🔹 Connection type (Wi-Fi 2.4 GHz / 5 GHz or Ethernet).

Please note: some devices (such as smart light bulbs or cameras) may appear without a hostname, only by MAC address. If you see many unknown addresses, it's time to check your network security.

Method 2: Tenda Wi-Fi Mobile App

If you prefer to control your router from your smartphone, install the official app. Tenda Wi-Fi (available for Android And iOS). It's compatible with most modern models and allows you to not only view a list of devices but also block suspicious connections directly from your phone.

To use the application:

1. Download Tenda Wi-Fi from App Store or Google Play.
2. Connect to your router's network Tenda.
3. Launch the app and follow the instructions to add a device (usually, scanning the QR code from the router sticker is enough).

After connection:

1. On the main screen, tap on your router icon.
2. Go to the section Devices or Connected Devices (the name depends on the version of the application).
3. You will see a list of all connected gadgets with the ability to sort by type (phone, computer, IoT device) or connection time.

Advantages of the application:

• 📱 User-friendly interface with device icons (easier to identify gadgets).
• 🔒 Ability to lock your device with one tap.
• 📊 Traffic usage charts by device.

What should I do if the app doesn't find the router?

1. Make sure your phone is connected to Wi-Fi Tenda (not to mobile data).

2. Check if the protocol is enabled on the router UPnP (in the web interface: Advanced → UPnP).

3. Reboot your router and try again.

4. If the router is an old model (for example, Tenda W308R), the application may not support it - use the web interface.

Disadvantage of the method: the application does not always work correctly with outdated router models (manufactured before 2018). If your Tenda older, it is better to use the first method.

Method 3: Windows Command Prompt (for advanced users)

If you prefer to work without a graphical interface, you can get a list of devices on your local network using the command line. WindowsThis method will show All devices on your subnet, not just those connected to Wi-Fi, but you can also identify clients among them Tenda.

Instructions:

1. Click Win + R, enter cmd and press Enter.
2. Enter the command:

   arp -a

   Click Enter.

3. You will see a table with the IP and MAC addresses of all devices your computer has interacted with recently.

To narrow the list to devices connected to Tenda:

• 🔍 Filter addresses starting with 192.168.0. or 192.168.1. (depending on your router's subnet).
• 🔍 Compare the MAC addresses with those displayed in the web interface Tenda (method 1).

Limitations of the method:

• ⚠️ Shows only devices with which data was exchanged (inactive devices may not be displayed).
• ⚠️ Requires basic knowledge of network protocols to correctly interpret the results.

Method 4: Third-party network scanning programs

If built-in tools Tenda If you're not satisfied with the settings, you can use third-party utilities. They offer advanced features, such as displaying the device name, manufacturer, connection speed, and even blocking unwanted clients. Let's look at the most reliable options.

1. Wireless Network Watcher (NirSoft)

• 🖥️ Free utility for Windows, does not require installation.
• 🔍 Shows all devices on the network with MAC addresses, names, and manufacturers.
• 📤 You can export the list to .csv for analysis.

2. Fing (for Android/iOS)

• 📱 Mobile application with an intuitive interface.
• 🛡️ Identifies network vulnerabilities (e.g. open ports).
• 🔄 Updates the list of devices in real time.

3. Angry IP Scanner

• 🌐 Cross-platform program (Windows, macOS, Linux).
• 🔧 Allows you to configure the range of IP addresses to be scanned.
• 📊 Supports plugins for advanced analysis.

Example of working with Wireless Network Watcher:

1. Download the program from the official website NirSoft and unzip the archive.
2. Run the file WNetWatcher.exe (administrator rights are not required).
3. Click Start Scanning - after a few seconds a list of devices will appear.

Unknown MAC addresses|Devices with suspicious names (e.g. "hacker123")|Addresses that don't match your gadgets|Duplicate IP addresses (address conflict)-->

Important: Some antivirus programs (for example, Avast or Kaspersky) may block network scanners, considering them potentially dangerous. If the program doesn't start, temporarily disable the protection or add it to the exceptions.

Method 5: Viewing via the router menu on TVs and Smart TVs

If you don't have a computer or smartphone at hand, but you do have Smart TV (For example, Samsung, LG, Sony Bravia), connected to the network TendaYou can try viewing the list of devices using the TV's built-in browser. This method is less convenient, but it works in emergency situations.

Instructions for Samsung Smart TV:

1. Open your TV menu and select Browser (or Internet).
2. In the address bar, enter 192.168.0.1 (or another IP of your router).
3. Log in to your control panel Tenda (use the remote control as a virtual keyboard).
4. Go to the section with the list of devices (the path is specified in Method 1).

Restrictions:

• ⚠️ Remote control is inconvenient for entering long passwords.
• ⚠️ Not all models Smart TV support work with web interfaces of routers (for example, on Android TV the panel may not open Tenda).

Alternative: If you have Android TV (For example, Xiaomi Mi Box or Nvidia Shield), install the application Tenda Wi-Fi from Google Play and use Method 2.

What to do if devices are not displayed or the list is empty

Sometimes, even after all these steps, the list of connected devices remains empty or doesn't show all devices. Let's look at the main causes and solutions:

If none of the above methods help, reset the router to factory settings:

1. Press and hold the button Reset on the back panel of the router (10–15 seconds).
2. Wait for the reboot (the indicators should light up as usual).
3. Connect to the network named Tenda_XXXX (the password is on the sticker).
4. Go to the web interface and configure the router again.

How to block unauthorized devices on a Tenda network

If you find any unfamiliar devices in the list of connected devices, you can block them. To do this:

Via the web interface:

1. Go to the section with the list of devices (see Method 1).
2. Find the line with the suspicious device and click Block or Block.
3. Save settings (Save or Apply).

Through MAC address filtering:

1. Copy the MAC address of the unwanted device.
2. Go to Advanced → MAC Filtering.
3. Add the address to the blacklist and activate filtering.

Via Tenda Wi-Fi app:

1. Open the section Devices.
2. Tap on an unfamiliar gadget and select Block.

Once blocked, the device will be unable to connect to your network, even if it knows the password. However, an attacker can change their device's MAC address, so for reliable protection, we also recommend:

• 🔐 Change your Wi-Fi password complex (at least 12 characters, with numbers and special characters).
• 🛡️ Disable WPS (V Wireless → WPS), since this protocol is vulnerable to hacking.
• 🔄 Update your router's firmware to the latest version (section System Tools → Firmware Upgrade).

FAQ: Frequently asked questions about connected devices in Tenda

Is it possible to see devices connected to Tenda guest network?

Yes, but they are displayed separately from the main network. In the web interface, go to Wireless → Guest Network and find the section Connected Devices (or similar). Guest clients don't have access to the local network, so blocking them isn't necessary unless you share the guest network password with outsiders.

Why does the device list show "Unknown" instead of a name?

This happens when a device doesn't broadcast its hostname to the network. This behavior is most common with:

• 🔌 Smart sockets, light bulbs, and other IoT gadgets.
• 📱 Old smartphones or tablets with incorrect network settings.
• 🖥️ Computers with this feature disabled NetBIOS.

To identify such a device, use the MAC address (the first 6 characters indicate the manufacturer) or disable the gadgets one by one, observing the changes in the list.

How do I find out which device is using the most data?

In the standard web interface Tenda There is no such function, but you can:

• 📊 Use the app Tenda Wi-Fi (chapter Traffic Statistics).
• 🖥️ Install the program on your computer GlassWire or NetBalancer for monitoring by IP addresses.
• 🔧 Enable QoS (Quality of Service) in the router settings (Advanced → QoS) to limit traffic for certain devices.

Is it possible to remotely check devices connected to Tenda?

Yes, but to do this you first need to enable the remote control function:

1. In the web interface, go to Advanced → Remote Management.
2. Activate the option and specify the port (default 8080).
3. Remember the external IP address of your network (you can find it on the website 2ip.ru).

⚠️ Attention: Remote control is vulnerable to hacking! Use a strong password and enable the feature only when needed, then disable it.

What should I do if a device named "Android_xxxx" or "iPhone" appears on the network, but it is not my gadget?

Most likely, a neighbor or passerby has connected to your network. Follow these steps:

1. Check the MAC address of the device using the service MAC Vendor Lookup (For example, macvendors.com).
2. If the address belongs Apple, Samsung or another well-known brand, but the gadget is not yours - block it (see section How to Block Unauthorized Devices).
3. Change your Wi-Fi password to a more complex one (at least 15 characters, with mixed-case letters, numbers, and symbols).
4. Disable the feature WPS in the router settings (Wireless → WPS).

If connections continue, consider changing the network name (SSID) and use of hidden network (turn off broadcasting SSID V Wireless → Basic Settings).