It's quite common for a new device to need to be connected to the network, but the access key is lost or forgotten. Equipment owners Planet Technology are no exception and often seek a way to restore access to their local network. If you've ever changed the factory settings, simply looking at the sticker on the bottom of the case may not help, as it only contains the initial code.
There are several proven methods to solve this problem, depending on whether you already have a connected device or if you have no access to the web interface at all. Restoring access This is possible through saved profiles in Windows or Android, as well as through a hard reset. It's important to understand the difference between viewing a saved password and performing a full device reset.
In this article, we will examine in detail all the available methods, from software methods to radical measures using a button. ResetYou'll learn how to access your router's control panel and where to find wireless security settings. The factory password is often located on a label underneath the device's case if you haven't changed it.
Finding a password on connected devices
The easiest and most secure way to find your access key is to view it on a device that's already successfully connected to the Wi-Fi network. In Windows, this is done through the Network and Sharing Center. Open the list of available connections and find the properties of your wireless network.
Go to Control Panel → Network and Internet → Network and Sharing CenterHere, select your active wireless connection and press the button. Wireless network propertiesIn the window that opens, go to the tab Security and check the box next to "Show entered characters".
For users of mobile devices based on Android The process may vary depending on the OS version and the manufacturer's user interface. On modern versions of Android (10 and above), simply tap the network name in the Wi-Fi settings to see a QR code. By scanning it with another phone's camera or a dedicated app, you can see the text version of the password.
- 📱 On Android, tap the gear next to the network name and select "Share" or "QR code."
- 💻 On Windows 10/11, use the command
netsh wlan show profile name="Network name" key=clearin the command line. - 🍏 On iOS, you can only view your saved password through iCloud Keychain on your Mac or in Settings on iOS 16+.
- 🌐 In the Chrome browser, the password can be found in the section
Settings → Autofill → Password Manager.
⚠️ Warning: If you use third-party programs to view Wi-Fi passwords, make sure they are secure. Many free utilities may contain malicious code that will steal your data.
Login to the Planet router web interface
If you don't have any connected devices or want to change security settings, you need to log in to your router's administrative panel. To do this, you'll need a computer or smartphone connected to the Planet router via Ethernet or Wi-Fi (if you still have access). Open any browser and enter the device's IP address in the address bar.
Standard address for most models Planet — 192.168.1.1 or 192.168.0.1The exact address, as well as default logins and passwords, are indicated on the factory sticker on the bottom of the case. After entering the address, the system will request authorization. The default credentials are often a combination of admin/admin or admin/1234.
After successful authorization, you'll be taken to the main settings menu. The interface may differ depending on the firmware version, but the logic remains the same. You need to find the section responsible for wireless networking. It's usually called Wireless, WLAN or Wi-Fi Settings. Within this section, look for the subsection Security or WLAN Security.
| Router model | Default IP | Login | Password |
|---|---|---|---|
| Planet WN-604 | 192.168.1.1 | admin | admin |
| Planet WN-624 | 192.168.1.1 | admin | admin |
| Planet WN-654 | 192.168.1.1 | admin | 1234 |
| Planet WN-704 | 192.168.0.1 | admin | admin |
What to do if the default password doesn't work?
If the admin/admin combination doesn't work, the password may have been changed previously. In this case, a full factory reset (hard reset) will help.
Resetting the router to factory settings
If you've lost your Wi-Fi password or control panel password and need to connect urgently, the only reliable option is a hard reset. This procedure will return your Planet router to the state it was in when you purchased it. All your personal settings, including your provider data, will be deleted.
To perform a reset, look for a small hole on the back of the device that says Reset or DefaultYou'll need a thin object, such as a straightened paperclip or toothpick. With the router turned on, press the button inside the hole and hold it for 10-15 seconds.
The indicators on the front panel should blink or go out, indicating a reboot. After the router fully boots up, it will use the factory login and Wi-Fi connection credentials. You can now log in to the interface using the default password and set a new security key.
☑️ Checklist before resetting your router
⚠️ Note: After resetting your settings, your internet will stop working until you reconnect to your ISP. Make sure you have a contract with your service provider that specifies your connection type and login information.
Setting up wireless network security
After restoring access or resetting your settings, it's critical to properly configure your network security. Open Wi-Fi or using outdated encryption protocols makes your network vulnerable to outsiders. In the Planet router interface, go to the wireless settings section.
In the field Security Mode or Authentication Type Choose the most reliable option available. Currently, the standard is WPA2-PSK or WPA3, if your equipment supports it. Avoid using the WEP protocol, as it can be cracked in minutes with specialized utilities.
Create a complex password of at least 8 characters, including mixed-case letters and numbers. Avoid obvious combinations like your date of birth or phone number. Save your new settings by clicking Apply or SaveThe router may reboot, and all devices will need to be reconnected with a new password.
Common connection problems
Users often encounter a situation where they can't connect even with the correct password. This can be caused by an IP address conflict or a network card driver configuration error. If your device displays "Unable to connect," try forgetting the network in your phone or laptop settings and re-entering the details.
Another common problem is the limited number of connected clients. Budget router models Planet may become unstable when more than 5-7 active devices are connected. In this case, rebooting the router or disconnecting unused devices may help.
It's also worth checking if MAC address filtering is enabled. If this feature is enabled in the security settings, network access is restricted to devices with specific IDs. In this case, knowing the password won't help unless you whitelist the new device's MAC address in the router interface.
- 🔄 Reboot your router by disconnecting the power for 30 seconds.
- 📡 Check if there is a limit on the number of users in the DHCP settings.
- 🔒 Make sure the correct encryption type is selected (AES, not TKIP).
- 🖥️ Update the wireless adapter drivers on your computer.
FAQ: Frequently Asked Questions
Where can I find the IP address of my Planet router if the default one isn't working?
If addresses 192.168.1.1 and 192.168.0.1 don't open, check the network settings on the connected computer. In the command prompt, enter ipconfig and find the line "Default Gateway." This is your router's current address.
Is it possible to recover the password without resetting the settings?
Yes, if you have at least one Windows computer that has previously connected to this network. The password is stored in the system and can be viewed in the wireless connection properties, as described at the beginning of the article.
What to do if the Reset button does not work?
Sometimes the button needs to be held longer (up to 20-30 seconds). If this doesn't help, the button may be physically faulty. In this case, you'll need to disassemble the device to short the contacts on the board or reflash the firmware via a console cable, which requires engineering skills.
Is it safe to use Planet's app for setup?
Official apps from the manufacturer are generally safe, but make sure you download them from official stores (Google Play, App Store). Third-party apps with similar names may pose security risks.