How to check who is connected to your Yota Wi-Fi router: 5 working methods

Have you noticed that the internet is Iota Is your Wi-Fi slower than usual? Perhaps unauthorized devices—neighbors, guests, or even hackers exploiting router security vulnerabilities—have connected to your Wi-Fi. In this article, we'll look at How to view a list of connected gadgets to a Yota router, even if you have a non-standard model or don't have access to the web interface.

Manufacturers of routers for Yota (for example, Huawei B525, ZTE MF286R or Sercomm L100) often hide the active clients section in non-obvious menus. We'll show you all possible paths — from the official app Iota House before analyzing traffic through WiresharkYou will also learn how distinguish a legitimate device from a foreign one by its MAC address and what to do if an unfamiliar gadget is found on the network.

Method 1: via the Yota router web interface

The most reliable method is to access the router's control panel through a browser. This doesn't require any additional software, just network access.

The login address depends on the model:

• 🔗 192.168.8.1 - for most routers Huawei (For example, B315, B525)
• 🔗 192.168.0.1 - For ZTE MF286R and some models Sercomm
• 🔗 192.168.1.1 - a universal option (try this if the first two didn't work)

The default login and password are usually indicated on the sticker on the back of the router (most often admin/admin or user/user).

After logging in, go to the active clients section. The path depends on your firmware:

• 📡 DHCP → DHCP Clients List (For Huawei)
• 📡 Network → LAN → Connected Devices (For ZTE)
• 📡 Status → Local Network → ARP Table (alternative option)

In the table you will see IP addresses, MAC addresses and device names (if they are broadcast).

⚠️ Attention: If your router is leased by Yota, the web interface may be blocked by the operator. In this case, use methods 2–5.

Check your cable connection (Wi-Fi may be disabled in the settings)

Reset the router using the button Reset (hold for 10 seconds)

Try a different browser (for example, Firefox instead of Chrome)

Disable VPN or proxy (they may block local addresses)-->

2. Method: via the Yota Dom app

Official app Iota House (available for Android And iOS) allows you to manage your router remotely, including viewing connected devices. However, functionality varies depending on the hardware model.

Instructions:

1. Open the app and log in with your Yota number.
2. Select a section My devices or Wi-Fi network.
3. Find the tab Connected devices (may be called Client list).
4. Click on an unknown device to view it MAC address and block.

Some versions of the app only display the number of connected devices without any details. If this is the case, use alternative methods.

⚠️ Attention: The Yota Home app's functionality may change after updates. If the devices section disappears, check for a new version. App Store or Google Play.

Method 3: via command line (Windows/macOS/Linux)

If the web interface is blocked and the application does not show details, use command lineThis method works on any device connected to the router's network.

For Windows:

1. Open Command line (Win + R → enter cmd).
2. Enter the command:

   arp -a

3. You will see a table with IP addresses And MAC addresses all devices on the local network.

To filter only active connections, use:

arp -a | findstr "dynamic"

For macOS/Linux:

1. Open Terminal.
2. Enter:

   arp -n

3. Additionally, you can scan the network with the utility nmap (install via brew install nmap or sudo apt install nmap):

   nmap -sn 192.168.8.0/24

4. Method: using third-party applications

If the previous methods don't work, install specialized network analysis utilities. They show not only a list of devices, but also their manufacturer, host name and even used bandwidth.

Top apps:

• 📱 Fing (Android/iOS) — scans the network in 10 seconds, detects open ports.
• 💻 Advanced IP Scanner (Windows) - a free utility with CSV export.
• 🖥️ Wireshark (Windows/macOS/Linux) - for deep traffic analysis (requires skills).
• 📊 NetCut (Android) - allows you to block other people's devices directly from your phone.

Example of working with Fing:

1. Connect to Yota Wi-Fi.
2. Launch the app and click Scan.
3. After a few seconds, a list of devices will appear indicating MAC addresses, manufacturer (For example, Apple, Samsung) And time of last activity.
4. Click on a suspicious device to view it IP And hostname.

Fing|Advanced IP Scanner|Wireshark|Other|I don't use-->

Method 5: via a router with Telnet/SSH support

For advanced users: some Yota routers (for example, Huawei B525) allow you to connect via Telnet or SSH and run commands to view active clients.

Instructions:

1. Find out the IP address of your router (usually 192.168.8.1).
2. Connect via Telnet (in Windows, enable support in Control Panel → Programs → Turn Windows features on or off).
3. Enter the command for authorization (standard logins/passwords: admin/admin or root/admin).
4. Perform:

   cat /proc/net/arp

   or for a detailed list:

   ip neigh show

In response you will receive a table with IP, MAC and status (REACHABLE — the device is active).

⚠️ Attention: Not all Yota routers support Telnet/SSH by default. If the connection fails, check if this protocol is enabled in the web interface (section System → Administration).

How to enable Telnet on the Huawei B525

1. Go to the web interface (192.168.8.1).

2. Go to System → Administration → Security.

3. Enable the option Enable Telnet and save the settings.

4. Connect via PuTTY or the built-in Windows client (telnet 192.168.8.1).

How to identify someone else's device and block it

You found an unfamiliar item in the list. MAC address Or a hostname? Here's how to figure out whose gadget it is and what to do with it:

Step 1: Check the manufacturer by MAC address

• The first 6 characters of the MAC (eg. A4:83:E7) indicate the manufacturer.
• Enter them on the website macvendors.com - you will find out who released the device (Apple, Xiaomi, TP-Link etc.).

Step 2: Compare with famous gadgets

• 📱 Check the MAC addresses of your phones, laptops, and smart speakers (you can find them in the Wi-Fi settings of each device).
• 🖥️ If the device has a name android-123456 or iPhone It doesn't belong to you - this is a clear sign of an outsider.

Step 3: Block a stranger

• 🔒 In the router's web interface, find the section MAC Filtering (or Access Control).
• 📋 Add the intruder's MAC address to the blacklist and save the settings.
• 🔄 Restart your router for the changes to take effect.

Common problems and solutions

Problem 1: The list of devices shows only IP addresses without names. Solution: Use the command nslookup in Windows or host On Linux/macOS, to find out the hostname by IP:

nslookup 192.168.8.100

Problem 2: The Yota Home app does not show a list of devices. Solution:

• Update the app to the latest version.
• Reconnect the router to your Yota account (section Settings → Devices).
• Try alternative methods (web interface or arp -a).

Problem 3: After blocking the MAC address, the foreign device connects again. Solution:

• Change SSID (network name) and Wi-Fi password.
• Turn on network hiding (option Hide SSID in the router settings).
• Update your router firmware (section System → Firmware Upgrade).

FAQ: Answers to Frequently Asked Questions

Is it possible to see the connection history to Yota Wi-Fi?

Most Yota routers don't keep a connection log. However, some models do. Huawei You can enable logging:

1. Go to the web interface (192.168.8.1).
2. Go to System → Log Settings.
3. Enable the option Enable System Log and specify the level of detail Debug.

Logs will be available in the section System → Logs, but they take up a lot of space and can slow down the router.

How can I find out who is connected to my Wi-Fi if my Yota router is blocked?

If the web interface and the Yota Dom app are unavailable:

• Use command line (arp -a or nmap).
• Install Fing or Advanced IP Scanner.
• Connect the router to another device via cable and try logging in from it.

If nothing helps, contact Yota support (phone 8 800 550-00-07) and request to unlock access to settings.

Is it possible to find out who is connected to my Wi-Fi using their phone number via Yota?

No, Yota does not provide this information upon request. However, you can:

• Call support and check if there have been any changes to your router settings.
• Ask to reset the router to factory settings (if it is rented from Yota).

To view connected devices, use only local methods (web interface, application, command line).

How to protect Yota Wi-Fi from unauthorized connections?

Safety checklist:

• 🔐 Change your default Wi-Fi password to a complex one (example: k7#pL9!mQ2$vR4).
• 🔄 Turn it off WPS (vulnerable fast connection protocol).
• 📡 Hide SSID (network name) in the router settings.
• 🛡️ Turn on MAC filtering (allow only your devices).
• 🔄 Update your router firmware regularly.

Why are there many unfamiliar MAC addresses displayed in the device list?

These could be:

• 📺 Smart devices (TVs, speakers, light bulbs) that you forgot about.
• 🖨️ Network printers or NAS drives.
• 🤖 Virtual machines or Docker containers on your devices.
• ⚠️ Neighbors using your Wi-Fi (if the password is weak).

To check, disconnect all your devices from the network and see which MAC addresses remain. The ones that remain are the wrong ones.