How to view the number of users connected to Wi-Fi on a Huawei router: all methods

Have you noticed your internet has slowed down and there are no guests at home? Or do you want to check if someone has connected to your network without permission? Find out the number of devices using your Wi-Fi from Huawei, you can do it in just a few minutes—and you don't have to be an IT specialist to do it. In this article, we'll cover all available methods: from simple viewing via a mobile app to router log analysis for experienced users.

It is important to understand that the number of connected devices affects not only the speed of the Internet, but also network security. For example, if to your Huawei HG8245H or Huawei WS5200 If an unknown device is connected, it could mean someone is using your bandwidth or even trying to access your local network. We'll show you how to not only count gadgets, but also determine their MAC addresses, IP addresses and even models - this will help to identify "extra" connections.

All methods in the article have been tested on current router models. Huawei (2020–2026), but the interface may vary slightly depending on the firmware version. If your model is older, some menu items may have different names. In this case, search for them in the settings or refer to the official documentation.

1. Viewing through the router's web interface (the most reliable method)

The web control panel is the heart of any router, where all settings are located, including information about connected devices. To access it, all you need is a browser and access to your local network. Here's how:

1. Connect to Wi-Fi yours Huawei (or use an Ethernet cable).
2. Open your browser and type in the address bar 192.168.1.1 or 192.168.100.1 (for some models) Click Enter.
3. Enter your login and password (by default it is often admin/admin or indicated on the router sticker).
4. Go to the section DHCP or Devices (depending on the model).

In most routers Huawei the list of connected devices is displayed in the menu Local Area Network → DHCP Clients or Wi-Fi → Connected devicesHere you will see:

• 📱 Device name (if it is configured, for example, "iPhone-12-Pro" or "Samsung-TV").
• 🔢 MAC address — a unique identifier that can be used to block unwanted connections.
• 🌐 IP address — the local address of the device on your network.
• ⏱️ Connection time — when the device was last connected to the network.

If you see unknown devices in the list, you can immediately block them using the "Disable" button or add to the blacklist by MAC address. You can also configure connection limit — for example, allow no more than 10 devices at a time.

2. Using the Huawei HiLink mobile app

Application Huawei HiLink (available for Android And iOS) makes it easier to manage your router from your phone. It automatically finds your Huawei on the local network and provides a convenient interface for monitoring connections. Here's how to use it:

1. Download Huawei HiLink from App Store or Google Play.
2. Register or log in with your account Huawei ID (not required, but convenient for synchronization).
3. The app will automatically find your router—click on its name.
4. Go to the section Devices or Wi-Fi (antenna icon).

The application displays real time connecting devices, as well as their type (smartphone, laptop, TV, etc.). Advantage HiLink before the web interface:

• 📲 Notifications about new connections (can be enabled in security settings).
• 📊 Traffic usage charts by device.
• 🔒 Quickly disable unknown gadgets with one tap.

However, the application also has its downsides: it does not always show full MAC address (sometimes only the last characters) and may not support older router models. If HiLink can't find yours Huawei, check if the mode is enabled in the router settings HiLink (usually in the section Management → Cloud Services).

3. Viewing via the command line (for advanced users)

If you prefer to work with terminal, you can get a list of connected devices via ARP table router. This method is universal and works even if the web interface is unavailable. You will need:

• Computer with Windows, macOS or Linux, connected to the router's network.
• Access to the command line (CMD, Terminal or PowerShell).

Run the following commands:

# For Windows:
arp -a

For macOS/Linux:
arp -n

You will see a list of IP addresses and their corresponding MAC addresses. To filter only active connections to your Huawei, pay attention to the IP addresses in the range of your local network (usually 192.168.1.x or 192.168.100.x).

For a more detailed analysis, you can use the utility nmap (install it in advance):

nmap -sn 192.168.1.0/24

This command will scan all devices on your subnet and display their MAC addresses, manufacturers (based on the first characters of the MAC), and status (online/offline). Warning: Network scanning may be blocked by some routers as suspicious activity.

How to decipher a MAC address?

The first 6 characters of the MAC address (eg. 54:E1:AD) indicate the device manufacturer. You can check them on sites like MAC Vendors or Wireshark OUI Lookup. For example, B8:27:EB - This Raspberry Pi, A 3C:5A:B4 — Google (Nexus/Pixel devices).

4. Checking through the operating system settings

If you need to quickly find out how many devices are connected to Huawei, but there is no access to the router, you can use the built-in tools Windows, macOS or LinuxThis method will only show devices that are actively communicating with your computer, so it is less accurate than the previous methods.

For Windows 10/11:

1. Open Control Panel → Network and Sharing Center.
2. Click on your connection (Wi-Fi or Ethernet).
3. In the status window, click Intelligence — will be indicated here Default Gateway (this is the IP of your router).
4. Open Command line and enter:

   net view \\192.168.1.1

   (replace IP with your router's address).

For macOS:

Open Terminal and enter:

netstat -r | grep default

Then copy the gateway (router) IP and run:

nmap -sn [router_IP]/24

These commands will show all active hosts on your network, but are not guaranteed to be 100% accurate—some devices (such as smartphones in sleep mode) may not be displayed.

Disable VPN on all devices | Make sure your router is turned on | Check your Wi-Fi connection | Run a scan when your devices are active-->

5. Analyze router logs (to identify hidden connections)

Router logs Huawei Contains detailed information about all connections, including access attempts and authentication errors. This is useful if you suspect someone has tried to connect to your network without success. To view the logs:

1. Go to the router's web interface (as in the first method).
2. Go to the section System Tools → System Log or Logs.
3. Select filter by Wi-Fi or DHCP.

In the logs, look for entries like:

• DHCP: Assigned IP 192.168.1.101 to MAC 5C:XX:XX:XX:XX:XX - successful connection.
• WLAN: Authentication failed for MAC 00:XX:XX:XX:XX:XX - unsuccessful connection attempt.
• Firewall: Blocked incoming connection from 192.168.1.105 - blocked connection.

If you see many connection attempts from unknown MAC addresses, this may indicate someone is trying to guess your network password. In this case, we recommend:

• 🔑 Change your Wi-Fi password to a more complex (use WPA3, if the router supports it).
• 🛡️ Disable WPS (vulnerable fast connection protocol).
• 📵 Hide SSID (do not show the network name in the list of available ones).

6. Limiting the number of connections on a Huawei router

If you find that your Huawei too many devices are connected, you can install limitThis will protect the network from overload and unauthorized access. This can be done in two ways:

Method 1: Via the web interface

1. Go to your router settings (192.168.1.1).
2. Go to Wi-Fi → Security Settings.
3. Find the option Maximum number of connected devices (or similar).
4. Set the desired value (for example, 15) and save the settings.

Method 2: Via the HiLink app

1. Open Huawei HiLink and select your router.
2. Go to Wi-Fi → Additional settings.
3. Activate the option Connection limitation and set a limit.

Recommended limits depending on network type:

If the limit is exceeded, new devices will not be able to connect until you free up space (by disabling unnecessary devices) or increase the limit. You can also configure traffic prioritization (QoS) to ensure that important devices (such as a work laptop) always have a stable connection.

Common problems and their solutions

Users often encounter difficulties when checking connected devices. Here are the most common ones and how to resolve them:

Problem 1: The router does not show all devices

If the list shows fewer devices than it should, it may be because:

• 🔌 The devices are connected via cable (Ethernet), not Wi-Fi - check the section Local area network.
• ⏳ Devices in sleep mode - wake them up (for example, turn on the smartphone screen).
• 🔄 Router cache - reboot it and refresh the list.

Problem 2: Unknown devices on the network

If you see connections with unfamiliar names or MAC addresses:

1. Check if you are connected to the network smart devices (lamps, sockets, cameras).
2. Compare MAC addresses with the manufacturer database (see spoiler above).
3. If the device is suspicious - block him in the router settings.

Problem 3: Unable to access router settings

If the web interface does not open:

• 🔌 Check the physical connection (cable, power).
• 🔄 Reboot your router (using the button) Reset or by turning off the power for 30 seconds).
• 📡 Make sure you are connected to the correct network (not your neighbor's!).
• 🔧 Try a different browser or clear your cache.

FAQ: Answers to frequently asked questions

Is it possible to see the history of connected devices for the past days?

In most routers Huawei Connection history is not saved for longer than 24 hours unless logs are configured to be sent to an external server. To keep track, you can:

• Tune monitoring system (For example, PRTG Network Monitor).
• Turn on sending logs by email (if the router supports it).
• Use third-party applications like GlassWire (for Windows/macOS).

How to block an unknown device on the Huawei network?

To lock your device:

1. Find its MAC address in the list of connected ones (see Section 1).
2. Go to Wi-Fi → MAC Address Filter.
3. Add the address to blacklist and save.

Alternatively, you can change your Wi-Fi password - all devices will break the connection, and the unknown gadget will not be able to connect again.

Why does the router show more devices than it actually has?

This may be due to:

• Cached DHCP leases — the router remembers devices that were connected previously.
• Double connections — one device can have two IPs (for example, via Wi-Fi and Ethernet).
• Viruses or botnets - Some malware creates "phantom" connections.

To clear the list, reboot the router or manually delete old entries in the section DHCP.

Is it possible to limit the speed for individual devices?

Yes, in routers Huawei with firmware HiLink there is a function QoS (Quality of Service)To set up:

1. Go to Additional settings → QoS.
2. Select a device from the list or add it manually by MAC/IP.
3. Set a speed limit (eg. 5 Mbps for guest devices).

This feature is not available on all models - check your router's documentation.

How do I find out which device is consuming the most traffic?

There are several ways:

• IN Huawei HiLink: chapter Traffic shows statistics by device.
• In the web interface: Statistics → Traffic Usage.
• Third-party programs: NetCut (Windows), Fing (mobile).

If your router does not provide detailed statistics, you can use SNMP-enabled router (For example, Huawei WS5200) and connect it to a monitoring system like Zabbix.

Now you know all the ways to check connected devices on a router. Huawei — from basic to advanced. Regular network monitoring will not only help optimize your internet speed, but also protect it from unauthorized accessIf you notice suspicious activity, don't delay—change your password and set up MAC address filtering.

For in-depth network analysis, you can use specialized tools like Wireshark or Nmap, but for most home users, the built-in features of the router and the app are sufficient HiLink.