Changing your home network password is a basic digital hygiene procedure that should be performed regularly. Router owner Huaweireceived from the provider Rostelecom, often faces the need to restrict unauthorized access or simply update security data. The standard factory keys, printed on a sticker on the bottom of the device, are easily guessed by thieves or shared with neighbors.
Changing your access key doesn't require in-depth technical knowledge, but it does require attention to interface details. In this article, we'll discuss how to access the control panel, where to find the necessary fields, and which security settings to select to ensure your internet remains fast and protected from unauthorized use.
Preparing to change security settings
Before making any changes to your hardware configuration, you must ensure a stable connection between your device and the router. It is best to perform the configuration from a computer connected via LAN cable, as the wireless connection will be lost when you change the password. If this isn't possible, use a smartphone or laptop connected via WiFi, but be prepared for the connection to be lost immediately after saving the new data.
You will need to know the web interface login address. For most models Huawei (HG8245H, HS8545M5, WS719) the standard address is 192.168.100.1 or 192.168.1.1This information is also indicated on the factory sticker on the bottom of the device in the field IP Address or Web Address.
⚠️ Attention: If you change the password while connected to a wireless network, the connection will be lost immediately after clicking "Save." You'll have to re-search for your network in the list of available networks and enter the new key.
Make sure you have access to an administrator account. On new devices, the login and password for entering settings are often the same as the WiFi information or are listed separately on a sticker (usually admin/admin). If these were previously changed and forgotten, you will need to perform a full reset using the button. Reset.
Login to the router control panel
Open any modern browser (Chrome, Opera, Yandex Browser) and enter your device's IP address in the address bar. Press Enter. You'll see a login page, which may look different depending on your firmware version. HuaweiEnter the administrator login and password.
The interface can be in Russian or English. If you see English text, look for the field Login And PasswordAfter successful authorization, the main menu will open, displaying the connection status and connected devices. Navigation is typically located on the left or top.
In some older firmware versions, the interface may require a plugin or have a specific look. The key is to find the tab responsible for wireless networking. It may be called WLAN, Wireless or WiFi.
Find the wireless settings section
After logging in, you need to go to the section responsible for the radio module. In the interfaces Huawei For Rostelecom This section is most often called WLAN. Inside it there may be several subsections, such as "Basic Network Settings" or "Security".
We need the security tab, where the encryption key is stored. Depending on your router model, the path may look like this: WLAN → WLAN Basic Configuration Settings or Network → WLAN → SecurityLook for the field where the current password is indicated by hidden dots or asterisks.
It's important not to confuse the Guest Network settings with the main network. If you change the password in the Guest profile, your main network will continue to work with the old key. Make sure you select the correct SSID (network name) if you have multiple.
The procedure for changing the password and choosing the encryption type
Once you find the password entry field (often called WPA PreSharedKey, Passphrase or simply Password), delete the old characters. Enter a new complex key. It is recommended to use a combination of upper and lower case letters, numbers, and special characters. The password should be at least 8 characters long, but 12 or more is preferred.
A critical parameter is WPA PreSharedKey or encryption method. From the list of available options (Security mode), select WPA2-PSK or WPA/WPA2-PSKThese are the most secure encryption standards currently available. Using outdated WEP or Open Access makes your network vulnerable to hacking in minutes.
☑️ Criteria for a strong password
After entering the new value, scroll down the page and find the button Apply or SaveClick it. The system may warn you that the settings will be applied, and the device may reboot the WiFi module. This is normal.
Settings for dual-band routers (2.4 GHz and 5 GHz)
Modern models Huawei, such as HS8545M5, support operation in two frequency ranges. In the interface, the settings can be combined into one group or separated. If you see separate tabs for 2.4G And 5G, the password must be changed in both sections if you want to update access to all networks.
Providers often enable the "Smart Connect" feature or SSID aggregation, where the router automatically assigns devices to the desired band under a single name. In this case, changing the password in one main profile will update access to all frequencies. However, if the networks are split (for example, "MyWiFi" and "MyWiFi_5G"), change the keys synchronously.
| Parameter | Recommended value | Description |
|---|---|---|
| Security Mode | WPA2-PSK | The most secure encryption standard |
| Encryption | AES | Data encryption algorithm |
| SSID | Any (lat.) | Your wireless network name |
| Channel Width | 20/40 MHz | Channel width (for 2.4 GHz) |
Keep in mind that devices connected via 5 GHz have a shorter range but higher speeds. By ensuring that passwords are the same or updated on both bands, you ensure the smooth operation of your smart devices.
Common mistakes and how to solve them
One of the most common issues is the inability to save settings. This can occur if the browser is caching an old version of the page. Try clearing the cache or opening the settings in incognito mode. The error can also occur if you enter a password that is too simple, which the security system considers weak.
Sometimes users forget to turn on the WiFi function itself after changing the password. Check if the checkbox is checked. Enable WLAN or Enable WirelessIf the checkbox is unchecked, the router will stop broadcasting the network and you will lose your connection.
⚠️ Attention: Firmware interfaces may vary depending on the region and year of manufacture of the device. If you don't find an exact match, search for similar terms in English.
What should I do if I forgot my admin password?
If you changed your router's password and forgot it, it can't be recovered. The only solution is to perform a hard reset. To do this, press and hold the Reset button on the device for 10-15 seconds. The router will return to factory settings, and the password will be the one on the sticker.
If your devices fail to connect after changing the password, try "Forget Network" in the WiFi settings on your phone or laptop, then reconnect using the new details. Old connection profiles may conflict with the new security settings.
FAQ: Frequently Asked Questions
Is it possible to change the WiFi password through the Rostelecom app?
Yes, if your router supports remote management technology (TR-069) and is linked to your personal account. The "My Rostelecom" or "Home with Cloud" apps often have a "My WiFi" section where you can change the network name and password without logging into the web interface (192.168.1.1).
What password is best to use for maximum security?
Use a random set of 12-16 characters, including uppercase and lowercase letters, numbers, and special characters (e.g., !, ?, #). Avoid simple words, names, birthdays, and keyboard sequences like "12345678."
Will the Internet disappear on other devices after changing the password?
Yes, all devices connected to WiFi will lose their connection. You'll need to re-enter the new password on each smartphone, tablet, TV, and laptop. Cable connections (via LAN) will remain functional.
Why doesn't my Huawei router accept the new password?
This may be due to a string length limit (usually up to 63 characters) or the use of invalid characters in some older firmware versions. Try using only Latin letters and numbers.