How to change the password on a Siberian Bear Wi-Fi router: instructions for all models

192.168.1.1
or
192.168.0.1

The address may differ - look for it on the sticker on the bottom of the device next to the serial number.

• Default: admin / admin or admin / password.
• If you have changed them previously, use your data.

If the login details are not correct and you cannot reset the settings (for example, the router is configured by your provider), contact technical support. Siberian Bear or to your internet service provider.

⚠️ Attention: Some router models Siberian Bear (For example, 1200AC v2) require to be specified serial number device upon first login. It is indicated on the sticker under the case.

4. Step-by-step instructions: how to change your Wi-Fi password

After successfully logging into the control panel, follow these instructions. The interface may vary slightly depending on the model, but the general principle is the same.

☑️ Steps to change your Wi-Fi password

Go to the "Wireless Network" sectionSelect the "Security" tabEnter a new password in the Network Key field.Save settings and reboot the router

Completed: 0 / 4
1. Go to the section Wireless network (Wireless):

   Find the item in the menu on the left Wi-Fi, Wireless or Wireless network. On some models (500M) it can be called WLAN.

2. Select a tab Security (Security):

   Here you can configure the encryption settings and password. Please note the field Security type (Security Mode).

3. Set the encryption type:

   Recommended option - WPA2-PSK (or WPA2/WPA3-PSK for new models). Don't use outdated WEP - it can be cracked in seconds.

   Encryption type	Security level	Suitable for
   WPA3-PSK	⭐⭐⭐⭐⭐	New devices (smartphones after 2020, laptops with Windows 11)
   WPA2-PSK	⭐⭐⭐⭐	All devices (universal version)
   WPA/WPA2-PSK	⭐⭐⭐	Compatibility with older gadgets (before 2015)
   WEP	⭐	Obsolete standard (do not use!)

4. Enter a new password:

   In the field Network key (Network Key or Password) Enter the password you created earlier. Repeat it in the field. Confirmation (if any).

5. Save the settings:

   Click the button Save (Save or Apply). The router will reboot (this is normal).

After rebooting, all devices will be disconnected from Wi-Fi. Please reconnect them using the new password.

5. What to do if you forgot your admin panel password

If you don’t remember the login/password to enter the router settings (Not to be confused with Wi-Fi password!), there are two solutions:

• 🔍 Try standard combinations:
  • admin / admin
  • admin / password
  • admin / (empty field)
  • user / user

  For some models Siberian Bear (For example, 300AC) login and password may coincide with the serial number (indicated on the sticker).

  • 🔄 Factory reset:

    If the default passwords don't work, you'll have to reset the router. To do this:

    1. Press and hold the button Reset (usually located on the back panel in a small hole).
    2. Hold her 10-15 seconds (until the indicators start flashing).
    3. Release the button and wait for the reboot (1-2 minutes).

    After resetting, the login and password will become standard (admin/admin), but all settings (including the Wi-Fi password) will be reset!

  ⚠️ Warning: Resetting your router to factory settings deletes all personal data, including internet connection settings (PPPoE, L2TP). If your provider requires special parameters (e.g. Rostelecom or Beeline), you'll have to re-enter them. Check them in your provider's personal account in advance.

  6. Typical mistakes and their solutions

  Users often encounter problems when changing their password. Let's look at the most common ones:

  • 🔴 Settings are not saved:

    Check what you clicked Save (Apply). If the button is inactive, you may have entered an incorrect password (for example, with spaces at the beginning or end). Delete any extra characters.

  • 🔌 The router does not reboot after saving:

    Unplug it for 30 seconds, then plug it back in. If the problem persists, update the firmware via the official website. Siberian Bear.

  • 📶 Devices won't connect to Wi-Fi after changing the password:
    • Make sure you have selected the correct one region (the router settings should be Russia or Europe).
    • Check if it is turned on MAC address filter (chapter Wireless Network → MAC Filter).
    • Restart the problematic device (smartphone, laptop).
  • 🔒 Unable to access control panel after reset:

    If the router does not accept the standard admin/admin, try:

    • Connect to a different IP address (for example, 192.168.8.1).
    • Use a different browser (sometimes Chrome caches old data).
    • Clear your browser cache or open the page in incognito mode.
  What to do if your router displays an "Invalid Network Key" error

  This error means that the new password contains invalid characters (for example, Cyrillic or rare special characters like § or ¶). Use only Latin letters, numbers and standard symbols: !@#$%^&*().

  7. Additional security settings

  Changing your password is just the first step to securing your network. To make it even more secure:

  • 🔄 Disable WPS:

    Function Wi-Fi Protected Setup (WPS) vulnerable to hacking. Go to Wireless Network → WPS and deactivate it.

  • 📡 Hide the network name (SSID):

    In the Wi-Fi settings, disable the option Broadcast SSID (Broadcast SSID). Now the network will not be visible to outsiders, but you will have to enter its name manually when connecting.

  • 🛡️ Update the firmware:

    Manufacturers regularly release updates that patch vulnerabilities. Check the latest version in the section System → Software Update.

  • 👤 Set up a guest network:

    If you frequently have guests over, create a separate network with limited access to local devices. This will make your main network more secure.

  We also recommend that you periodically check the list of connected devices (Wireless Network → Clients). If you see unfamiliar gadgets, change your password immediately!

  FAQ: Frequently Asked Questions

  Is it possible to change the Wi-Fi password via a mobile app?

  Yes, for some models Siberian Bear (For example, 1200AC) there is an official application Siberian Bear Wi-Fi (available in Google Play And App Store). The functionality is limited, but changing the password is possible. However, the web interface is more secure—it has more settings.

  How do I find out what type of encryption my router uses?

  Go to control panel, then to Wireless Network → Security. Field Security type (Security Mode) will show the current standard (WPA2, WPA3, etc.).

  What should I do if I lose internet access after changing my password?

  Most likely, the problem is not with the password, but with the connection settings to the provider. Check the section Network → WAN and make sure the correct parameters are entered (connection type, ISP login/password). If you're unsure, call your internet provider's support team.

  Is it possible to set a password on a router so that no one can access the settings?

  Yes, in the section System → Administration (Administration) you can change the default administrator password (admin) to your own. Use a complex combination and keep it in a safe place—without it, you won't be able to access your settings!

  How often should I change my Wi-Fi password?

  Recommended frequency - once every 3–6 monthsAlso change your password if:

  • Outsiders (guests, neighbors) connected to your network.
  • You have noticed suspicious activity (slow internet for no apparent reason).
  • Your data (for example, your provider's personal account password) has become known to third parties.