Securing your home network is a top priority for any internet user, and the first step to protecting your data is setting up a strong access key. Change password on the brand's WiFi router Planet (Planet) allows you to prevent unauthorized access to your traffic through your personal account or web interface. Many users neglect this step, leaving their default settings, which leaves the network vulnerable to attacks and personal data theft.
In this guide, we'll walk you through the process of updating your wireless network credentials, focusing on the nuances of router interfaces. PlanetYou'll learn how to properly log into the administration system, select the optimal encryption type, and save settings to prevent loss of access to your device. The default password is often printed on a sticker on the bottom of the case, but using it in plain text is highly discouraged.
The security key update procedure doesn't require advanced technical knowledge, but it does require careful entry. A single letter or number error can result in all connected devices losing network connectivity until the settings are corrected. Below are step-by-step instructions to help you complete this process quickly and efficiently.
Preparing to change security settings
Before you begin modifying your router's configuration, you need to ensure a stable connection between your control device and the router itself. A wired connection is best. Ethernet-cable, as changing the password will break the wireless connection, and you may lose access to the web interface if you switch to WiFi. Make sure the cable is firmly inserted into the connector. LAN on the router and in the network card of your computer or laptop.
You will also need to know the control panel login address and login credentials. For equipment of the brand Planet The standard IP address is often 192.168.1.1 or 192.168.0.1, however, these values may have been changed previously. The default login and password are usually located on the label on the bottom of the device, but if you have changed them previously, use the current information.
⚠️ Attention: If you don't remember the password for entering the router settings and it was changed earlier, the only solution is to reset the device to factory settings using the button
Reset.
It's recommended to prepare a new, complex password in advance that meets modern security requirements. It should contain at least 8 characters and include uppercase and lowercase letters, numbers, and special characters. Using simple combinations like "12345678" or your date of birth will negate all your network security efforts.
☑️ Check before starting setup
Login to your personal account and control panel
Open any modern web browser on a computer connected to the router. In the address bar, enter your device's IP address, for example, 192.168.1.1, and press the key EnterIf the address is entered correctly, the system will ask for authorization. In the window that appears, enter your login (often admin) and the current administrator password.
After successful authorization, you will be taken to the main menu of the web interface. PlanetThe interface may differ depending on the model and firmware version, but the navigation logic remains similar. Basic wireless network settings are usually located in the Wireless or WiFi SettingsIn some software versions, access to these parameters may be located in a separate tab. Setup or Advanced.
If you log in to your personal account through a provider or manufacturer's cloud service, the procedure may require additional confirmation via the mobile app. In this case, make sure your mobile device has internet access and your account is linked to the router's serial number.
What should I do if the page doesn't load?
If your browser says "Unable to access the site," check that you've entered your IP address correctly. You can also try clearing your browser's cache or using Incognito mode. Sometimes the blocking process can be caused by an antivirus or firewall, which should be temporarily disabled to make adjustments.
Find the wireless settings section
While in the main menu, carefully examine the sidebar or the top horizontal menu. You should find the section responsible for wireless connections. In the interfaces Planet it is often referred to as Wireless, WLAN or WiFi. Within this section you should look for a subsection Security (Security) or Basic Settings (Basic settings).
The menu structure can be nested. For example, the path might look like this: Setup → Wireless → SecuritySome models have separate settings for the 2.4 GHz and 5 GHz bands, and you'll need to change the password for each band separately if they're not combined into a single network. Note the current status of the wireless module—it should be active (Enable).
It's important not to confuse the WiFi settings section with the LAN or WAN settings section. Changing settings in the wrong section may result in loss of internet access or the need to reconfigure your ISP connection. If in doubt, it's best to consult the user manual for your specific model. Planet.
Selecting the encryption type and setting a password
In the security section, you will see a field to enter an access key, which may be called Pre-Shared Key, Passphrase or WiFi PasswordThis is where you need to enter your new password. It's extremely important to pay attention to the parameter Security Mode or EncryptionFor maximum protection, it is recommended to choose the standard WPA2-PSK (AES) or WPA3, if your router model and client devices support this protocol.
Avoid using outdated encryption standards such as WEP or WPA (TKIP), as they are easily cracked with modern tools. Choosing the right encryption algorithm ensures that even if data packets are intercepted, an attacker will not be able to decrypt the traffic without knowing the key.
After entering your password in the appropriate field, double-check the characters you've entered. Interfaces often offer the option to display the password in plain text (an eye icon), which allows you to ensure there are no typos. Capitalization matters: "Password" and "password" are different access keys.
| Parameter | Recommended value | Description |
|---|---|---|
| Security Mode | WPA2-PSK (AES) | The most compatible and secure standard |
| Encryption | AES | Strong data encryption algorithm |
| WPA Group Rekey Interval | 3600 (sec) | Frequency of encryption key changes |
| Max Clients | As needed | Limiting the number of connected devices |
Save configuration and reboot
After entering all the required data, you need to apply the changes. Find the button Save, Apply or OK at the bottom or top of the page. Clicking this button initiates writing new parameters to the router's non-volatile memory. At this point, the device may interrupt wireless operation for a few seconds.
In some models Planet After saving the settings, a manual reboot of the device is required for the changes to take effect. The system may prompt you to do this immediately or reboot later. We recommend accepting the immediate reboot to ensure the new settings are working correctly.
Please note that when you apply these settings, all devices connected via WiFi will lose their connection. This is normal. You will need to reconnect to the network using the new password on each device: smartphone, tablet, laptop, or Smart TV.
Connecting devices with a new password
Once the router has finished rebooting and the WiFi indicators have stabilized, you can begin connecting client devices. On your computer or phone, find your network name (SSID) in the list of available networks. If the device was previously connected automatically, it may attempt to connect with the old password and return an error.
Select your network and tap "Forget Network" or "Delete Profile" to prompt the device to request a password again. Enter a new passkey, being careful to ensure proper case-intelligibility. After successful authentication, the device will save the new information and connect automatically in the future.
If the connection fails, make sure you don't include any spaces at the beginning or end of the password, as they may have been accidentally added when copying it. Also, check if MAC address filtering is enabled, as this could block your device when changing security settings.
Common mistakes and how to solve them
One common issue is when the router accepts a new password, but devices fail to connect, displaying an "Incorrect Password" message. This may indicate that the selected encryption type is incompatible with the network card of the old device. In this case, try temporarily lowering the security level to WPA/WPA2 Mixed, although it is less safe.
Another common mistake is blocking access to the router interface itself after changing LAN or DHCP settings. If you changed the router's IP address during setup, you'll have to enter the new address in your browser to access the control panel. Make a note of the new IP address if you plan to change these settings as well.
⚠️ Attention: Interfaces and menu item names may vary depending on the firmware version. Always consult the official documentation for your model if the standard path doesn't work.
If nothing helps and the router behaves unstable, perform a full reset of the settings (Factory Reset). To do this, press and hold the button Reset on the back of the device for 10-15 seconds (until all the indicators blink). After this, the router will reset to factory settings, and you'll need to configure it again, including entering your ISP credentials.
Is it possible to change the password via the mobile app?
Yes, many modern routers Planet They support control via dedicated apps or web interfaces adapted for mobile browsers. However, the functionality of mobile versions may be limited compared to the full desktop version.
What should I do if I forgot my new WiFi password?
If you've forgotten the password you set, you can find it in the connected computer's settings (in the wireless network properties) or log in to the router's web interface, where it's displayed in the security field. If you've also lost access to the interface, a reset will help.
Does a complex password affect internet speed?
No, password complexity and encryption type (WPA2/WPA3) have virtually no impact on data transfer speeds at home. Modern router processors handle encryption instantly, without any delays.