How to change the password on an MGTS Wi-Fi router via phone: detailed instructions (2026)

Forgot your home Wi-Fi password or need to update it for security reasons? Doing this on your phone is no more difficult than on your computer—the key is knowing the correct steps. In this article, we'll cover the process. Step-by-step process for changing your password on routers that are provided MGTS to our subscribers. We will take into account the features of popular models (ZTE F660, Huawei HG8245H, Sercomm RV6699 and others), and we will also show you how to bypass typical errors when entering settings.

Many users mistakenly believe that changing router settings requires a laptop or PC. In fact, router web interface opens equally well on a smartphone - be it Android or iPhoneYou don't need any special applications: a standard browser is enough (Chrome, Safari, Firefox) and 5-10 minutes of your time. And if you're worried about breaking something, don't worry: you can always reset to factory settings using the button Reset on the device body.

1. Preparation: What you need to know before changing your password

Before you start changing your password, make sure your phone is connected to the MGTS router's Wi-Fi networkIf you forgot your current password and can't connect, you'll have to use a cable. Ethernet (via adapter USB-C/Lightning → RJ-45) or reset the router to factory settings (we'll talk about this at the end of the article).

Also check the following points:

• 🔋 The router is turned on and the power/Internet indicators are steady (not blinking).
• 📶 Wi-Fi signal can be caught on the phone (even without internet).
• 🔒 Login and password to enter into the router settings. Usually this is admin/admin or indicated on the device sticker.
• 📱 Browser on your phone updated to the latest version (older versions may not display the interface correctly).

If you have never accessed your router settings, you can find your login information here. sticker on the back or bottom of the case. Look for fields Username/Password or Login/Password. U MGTS a combination is often used admin/mtspw or user/user - It depends on the model.

⚠️ Attention: If you have previously changed your login/password for logging into your router and have forgotten them, the only way to restore access is hard reset (button Reset). After this, all settings, including the Wi-Fi password, will return to factory settings.

2. How to access MGTS router settings from your phone

Open any browser on your phone and enter in the address bar Router IP address. For devices MGTS this is usually:

• 192.168.1.1 - for most models ZTE And Huawei;
• 192.168.0.1 - for some versions Sercomm;
• 192.168.100.1 — rare, but occurs in older routers.

If none of the addresses open the login page, check the correct IP as follows:

1. On Android: go to Settings → Wi-Fi, tap on your network → look at the line Gateway.
2. On iPhone: Settings → Wi-Fi → (i) next to the network → field Router.

After entering the IP address, you will see an authorization window. Enter your username and password (see above for defaults). If the information is correct, router web interface.

3. Step-by-step instructions: changing your Wi-Fi password

Router interface MGTS It may vary slightly depending on the model, but the general logic is the same. Follow this algorithm:

1. Go to the wireless network section:
   • For ZTE: Network → WLAN → Security;
   • For Huawei: WLAN → WLAN Basic Configuration;
   • For Sercomm: Wireless → Security.

Find the field with the current password (may be called WPA Pre-Shared Key, Password or Network key).

Enter a new password (recommendations below).

Save changes - usually a button Apply, Save or Apply.

After saving, the router will reboot (this is normal). After 1-2 minutes, connect to Wi-Fi with the new password.

At least 8 characters|Mix of letters (Az), numbers (0-9), and symbols (!@#$%)|No personal information (date of birth, names)|No simple sequences (12345, qwerty)|Unique (not used for other services)

-->

4. Features for popular MGTS router models

Router manufacturers use different firmware versions, so the path to Wi-Fi settings may vary. Below are brief instructions for the most common devices.

If your model is not in the table, use the universal method: look for the words in the menu Wireless, WLAN or Wi-Fi, and then - Security (safety).

⚠️ Attention: On some routers Huawei After changing the password, you will need to additionally press Apply in the section WLAN Advanced Configuration, otherwise the settings will not be saved.

5. Common mistakes and how to avoid them

Even when following the instructions, users often encounter problems. Here are the most common ones and their solutions:

• 🔄 The login page does not open.:
  • Check if your phone is connected to the router's Wi-Fi (not mobile data).
  • Try a different browser or clear your current browser's cache.
  • Make sure you enter the IP address without http:// or www.
• 🔑 The login/password does not work:
  • Try it admin/admin, admin/password or user/user.
  • Check the sticker on your router - it may contain unique information.
  • If nothing helps, reset the settings using the button Reset (hold for 10-15 seconds).
• 📡 After changing the password, Wi-Fi does not work.:
  • Reboot your router (turn off the power for 30 seconds).
  • Make sure you saved your settings (sometimes you need to click Apply twice).
  • Make sure that the new password does not contain Cyrillic characters or spaces (some routers do not support them).

If your devices don't connect to Wi-Fi after changing the password, try manually setting the security type. WPA2-PSK (and not WPA3 (or mixed mode) - this solves the problem of compatibility with older gadgets.

6. How to reset an MGTS router if you forgot the settings password

If you can't log into your router's web interface because you've lost your login/password, the only way out is to hard resetTo do this:

1. Find the small button on the back of the router. Reset (sometimes it is recessed into the body).
2. Take a paper clip or a toothpick and press and hold the button 10-15 seconds.
3. Wait until the indicators on the router blink and it reboots (usually 1–2 minutes).

After reset:

• 🔄 All settings will be reset to factory defaults, including the Wi-Fi password (it will be indicated on the sticker).
• 📡 You will have to reconfigure your internet connection (information for this is in the contract with MGTS).
• ⚠️ The login and password for logging into the router will also be reset (see sticker).

If the internet still doesn't work after the reset, please contact support. MGTS — you may need to reactivate the device in the provider’s network.

What to do if the Reset button does not work?

If the router does not reset with the button, try:

1. Turn off the power, hold down Reset, then turn on the power and hold the button for another 20 seconds.

2. Check if the button is stuck (gently move it with a paper clip).

3. Contact a service center - the memory chip (NVRAM) may be faulty.

7. Additional Wi-Fi Security Tips

Changing your password is just the first step to securing your network. Here's what else you should do:

• 🔒 Disable WPS (vulnerable protocol): look for the option in the section Wi-Fi → WPS and put Disable.
• 📡 Hide the network name (SSID): in the Wi-Fi settings, turn it off Broadcast SSID (but then you will have to enter the network name manually on new devices).
• 🔄 Update the firmware: in the section System Tools → Firmware Upgrade Check that the software is up to date.
• 📵 Set up a guest network: If you often have guests, create a separate network with limited access to local devices.

We also recommend change your Wi-Fi password every 3–6 months, especially if you frequently share it with strangers. To generate strong passwords, you can use managers like Bitwarden or KeePass.

Frequently Asked Questions (FAQ)

Can I change my Wi-Fi password using the My MGTS app?

No, the app My MGTS Allows you to manage your plans and payments, but not your router settings. To change your Wi-Fi password, you must access the device's web interface through a browser.

Why don't some devices connect after changing the password?

This may be due to:

• Incompatible type of security (try it WPA2-PSK instead of WPA3).
• Limitation on MAC addresses (check the section Wireless MAC Filter).
• Too much long or complex password (Some older devices do not support passwords longer than 20 characters).

Solution: Temporarily simplify your password (e.g. 12345678Aa!), connect the problematic devices, then return the complex password.

How do I know who is connected to my Wi-Fi?

Go to the router's web interface and find the section DHCP Clients List, Connected Devices or Client list. All connected gadgets will be listed there with their IP And MAC addressesIf you see unfamiliar devices, change your password.

Is it possible to change the Wi-Fi password without access to the router (for example, if it's at a neighbor's)?

No, you can only change your router settings if you have physical or network access to it. If we're talking about neighbor's Wi-Fi, That:

• Connection without the owner's permission illegally (Article 272 of the Criminal Code of the Russian Federation).
• The most you can do is ask your neighbors to share the password or strengthen your router's signal.

What should I do if I lose internet access after changing my password?

Most likely, the problem is not with the Wi-Fi password, but with the connection settings MGTS. Check:

1. Is the indicator light on? Internet or Link on the router.
2. Has the cable come loose from the port? WAN/GPON.
3. In the section Network → WAN or Internet Check that the connection details are correct (you can check them with support) MGTS).

If the internet indicator is not lit, contact your internet provider – the problem may be on their end.