How to change the password on a Wi-Fi router using a Xiaomi phone

Changing your wireless network password is a basic security procedure that every user should be able to perform. If you have a smartphone, Xiaomi, the setup process becomes even easier thanks to the user-friendly interface MIUI or HyperOSYou don't need to look for a laptop or cable, as all the necessary tools are already built into the system.

In this article, we'll detail the steps you need to take to change your network access key in just a couple of minutes. We'll cover both standard browser-based methods and specific apps from hardware manufacturers.

Before making any changes, make sure your phone is connected to the Wi-Fi network whose settings you're about to edit. This is critical, as remote control without a local network connection is often blocked by router manufacturers for security reasons.

Preparing your smartphone and router for setup

The first step is the physical connection. Make sure the Wi-Fi module on your Xiaomi activated. Go to the menu Settings and select the item Wi-FiIf you see the "Connected" status next to your network name, then the first step has been successful.

Sometimes the system may warn you about internet access being lost after changing settings. Don't be alarmed; this is normal if you're changing your password and the device hasn't yet reconnected. The key at this point is to maintain connection to the router itself, which acts as the gateway to the control panel.

⚠️ Note: If you change the settings of a router connected via Wi-Fi, the connection to your phone will be lost when you save the changes. This is normal, but for initial setup, it's best to use a wired connection or be prepared to re-enter the new password.

To log into the control panel, you'll need the factory data. This is usually located on a sticker on the bottom or back of the device. You'll need the "IP address" field (often 192.168.0.1 or 192.168.1.1), as well as the username and password for accessing the web interface (not to be confused with the Wi-Fi password).

Logging into the router's web interface via a browser

Open any installed on your Xiaomi browser: Chrome, Yandex Browser or standard Mi BrowserIn the address bar, not the search bar, you need to enter your device's IP address. Most often, this is 192.168.1.1 or 192.168.0.1, but the exact address is always indicated on the sticker.

After entering the address and clicking on it, the system will ask for authorization. Enter your username and password. By default, this is often a combination admin / admin, but if you've previously changed this information, use the current one. If you lose the password, you'll have to reset the router to factory settings.

⚠️ Note: Router interfaces from different manufacturers (TP-Link, ASUS, Keenetic, D-Link) may look different, but the operating logic remains the same. Look for sections labeled "Wireless," "Wi-Fi," or "Security."

Modern smartphones Xiaomi are equipped with a "Secure Connection" feature that can block access to local URLs by marking them as unsafe. If the page doesn't load, try opening it in incognito mode or temporarily disabling your mobile data (4G/5G), using only Wi-Fi.

What should I do if the page doesn't open?

Make sure the address doesn't include the http:// or https:// prefix; enter only numbers and periods. Also, check that your phone isn't in "Data Saver" mode, which can block local pages.

Find the wireless network section in the menu

After successfully logging in, you'll be taken to the main page of the control panel. It's important not to get lost in the abundance of terminology here. You need to find the section responsible for wireless connections. It may be called Wireless, Wi-Fi, Wireless mode or WLAN.

Within this section, look for a subsection related to security. It is usually called Wireless Security, Wireless security or simply SecurityThis is where the encryption and password settings are located.

Please pay attention to the encryption type. For maximum protection and compatibility with all modern devices, including yours. Xiaomi, it is recommended to choose the standard WPA2-PSK or WPA3Outdated encryption methods such as WEP are easily cracked and do not provide adequate security.

The procedure for changing the password and saving settings

Find the field labeled as PSK Password, Wireless Password or Wireless network passwordIn current firmware versions, this field is often hidden behind asterisks. Click the "eye" icon or simply type the new character to see what you're typing.

Create a complex password that includes mixed-case letters and numbers. Avoid simple combinations like "12345678" or your date of birth. The password should be at least 8 characters long, but 12 or more characters are recommended for increased attack resistance.

After entering a new value, be sure to press the button Save (Save) or Apply (Apply). The button is often located at the bottom of the page. The router may warn you that the connection will be terminated. Confirm the action.

Specifics of setting up via the Mi Wi-Fi app

Smartphone owners Xiaomi can take advantage of the ecosystem application Mi Wi-Fi (or a built-in module in the application Mi Home). This method is suitable if your router also supports cloud management or belongs to the ecosystem Xiaomi.

Launch the app and wait for the router to be detected. If the device is found, go to the section Settings (gear icon). Here in the paragraph Wi-Fi settings You can change the network name (SSID) and password.

The advantage of this method is that the app will automatically reconnect your phone to the network with a new password, so you don't have to enter it manually. However, for third-party routers (e.g., TP-Link or Asus) functionality may be limited to viewing status only, without the possibility of deep customization.

⚠️ Note: The Mi Wi-Fi app's functionality depends on the router model. For devices of other brands, we recommend using the browser-based method described above, as it is universal.

Table of standard addresses and login data

For quick access to settings for various equipment models, use the reference table below. Data may vary depending on the model and region.

Possible problems and their solutions

You may encounter difficulties during the setup process. For example, the phone Xiaomi It may say "Connected, no internet access." This is normal behavior when changing your password. Simply turn off Wi-Fi on your phone and turn it back on, then enter the new password.

If the settings page doesn't open, check if you're using mobile data. To log in 192.168.x.x The mobile network must be disabled, otherwise the phone will try to open the provider's page or search engine. Also, make sure the address doesn't contain any extra characters.

In rare cases, especially on older router models, the interface may not display correctly on high-resolution screens of modern devices. XiaomiTry enabling "Desktop site" in your browser settings to ensure the controls are in place.

Frequently Asked Questions (FAQ)

What should I do if I forgot my router settings password?

If you changed the password for the web interface (not to be confused with the Wi-Fi password) and forgot it, a full reset will help. To do this, press the Reset button on the router with a thin object and hold it for 10-15 seconds until the lights flash. After this, the device will return to the factory settings indicated on the sticker.

Can I change my password if I'm not connected to Wi-Fi?

This is theoretically possible if your router supports remote cloud management (e.g., Keenetic Cloud or TP-Link Tether ID) and this feature has been pre-configured. In the standard scenario, access to the interface 192.168.x.x possible only from within the local network.

Why did the TV stop seeing the network after changing the password?

Smart devices often remember old security settings. You need to go to the network settings on your TV, find your network, select "Forget network" or "Delete," and then reconnect using the new password.

Does changing your password affect your internet speed?

No, the password itself doesn't affect speed. However, if you change the encryption type from WPA2 to WPA3, very old devices (manufactured more than 10 years ago) may stop connecting or become unstable. This isn't a concern for most modern devices.