Changing the wireless network password for a Mir TV set-top box isn't just a standard maintenance procedure, but an important step in ensuring the security of your home network. Many users need to change the access key when they notice unrelated devices in the list of connected devices or simply after purchasing a new router. It's important to understand that Android set-top box does not store the network password internally for distribution, but only acts as a client, so the change process always occurs on the router side.
If you plan to change security settings, you'll need access to your router's administrative panel. Without this step, you won't be able to change the encryption or access key. WPA2/WPA3 It won't work. In this article, we'll cover in detail how to change credentials through the router's web interface, how to reconnect the set-top box after changing the key, and what to do if access to the settings is lost. Ready to work with IP addresses and basic network parameters will significantly speed up the process.
It is worth noting that the procedure may differ slightly depending on the manufacturer of your equipment, whether it is TP-Link, Keenetic or MikroTikHowever, the logic of actions remains the same for all devices that support the standards. IEEE 802.11We'll look at universal algorithms that are suitable for most home networks, and we'll pay special attention to areas where beginners often make mistakes.
Preparing to change wireless network settings
Before making any changes to your router's configuration, ensure you have physical access to the hardware and device for management. It's best to perform the configuration from a computer connected via cable or from a smartphone connected to the same network. This will eliminate the risk of losing connection while making changes. WiFi passwordIf you change settings via WiFi, be prepared for the connection to be interrupted immediately after saving the new settings.
You will also need to know the login address for your router's control panel. This is usually the default 192.168.0.1 or 192.168.1.1, but some provider models may use specific domain names. The administrator login and password are usually located on a sticker on the bottom of the device, unless you've changed them previously. Forgetting these details means you'll have to reset the router, which will result in the loss of all provider settings.
⚠️ Important: Before starting, write down the current PPPoE or L2TP settings provided by your internet service provider. Resetting the router without this information will leave you without internet access.
Make sure the Mir TV set-top box is currently turned off or simply not attempting to automatically connect to the network while you're performing these actions. This will help avoid IP address conflicts or module freezes. Wi-Fi adapter On the client device. After completing the router settings, you'll turn on the set-top box and enter the new key.
Login to the router control panel
The first step is to log in to the router interface. Open any browser on a device connected to the network and enter the gateway IP address in the address bar. If the default addresses don't work, check your computer's network settings: the "Default Gateway" line will show the correct IP address. For Windows, this can be done via the command line by entering the command ipconfig, and for Linux or macOS - ifconfig or ip route.
After entering the address, the system will ask for login information. Standard login and password pairs are often admin/admin or admin/password, but modern models require a unique password to be set upon first startup. If you don't remember the administrator password, you'll have to search for the button Reset on the router body. Press and hold it for 10-15 seconds with the power on until the indicators blink simultaneously.
Interfaces from different manufacturers may look different, but the menu structure is usually similar. Look for sections labeled "Wireless," "Wireless Mode," "WLAN," or "WiFi." This is where the security settings are located. In some firmware versions, for example, Keenetic, it could be the "My Networks and WiFi" tab, and TP-Link —"Wireless" ->"Wireless Security".
Find the wireless settings section
Once you're in the router menu, you need to locate the section responsible for the radio module. In older interfaces, settings may be scattered across different tabs, while in modern firmware versions, such as NDMS v2 or Tenda OS, everything is collected in a single dashboard. Find the section responsible for security or encryption. Here you will see the current protection type, which should typically be set in WPA2-PSK or WPA3-Personal for maximum safety.
Pay attention to the "Wireless Password, Pre-Shared Key" field. This is where you'll need to enter your new password. It's recommended to use complex passwords of at least 12 characters long, including mixed-case letters, numbers, and special characters. Avoid obvious combinations, such as birthdays or sequences of numbers, as these are easily guessed using methods. brute force.
Some routers have a separate setting for a guest network. If you use guest access, the password for it can be changed in the adjacent tab, often called "Guest Network." Be careful not to confuse the main key with the guest key, otherwise the Mir TV set-top box will not be able to connect if you enter incorrect information. After entering the new password, be sure to click "Save" or "Apply," otherwise the changes will not take effect after a reboot.
☑️ Check before changing your password
The process of changing the password and applying settings
After you've entered the new password in the appropriate field, you need to apply the changes. The system may warn you that all wireless devices will be disconnected. This is normal, as the router is rebooting its radio module with the new encryption parameters. The process takes 10 to 30 seconds. During this time, the WiFi indicator on the router may blink or go out.
It's important to understand the difference between saving settings and applying them. The "Save" button often simply stores the data in memory, but doesn't activate it. The "Apply" button or an automatic interface reboot is required. If you're using a router from a provider (e.g., Rostelecom or MGTS), the interface may be truncated, and changes are applied instantly after entering, but it is better to double-check the connection status.
⚠️ Note: After changing the password and rebooting the router, your computer or phone used to configure the router will also lose connection. You will need to reconnect to the network using the new key.
If you have changed not only the password but also the encryption type (for example, with TKIP on AES), older devices may stop seeing the network. Make sure your Mir TV set-top box supports the selected security standard. Modern models work without problems. WPA3, but for budget versions it is better to leave the mixed mode WPA2/WPA3 or pure WPA2.
Connecting the Mir TV set-top box to a new network
Now that the router is configured, you need to update the data on the set-top box itself. Turn on the TV and wait for the Mir TV interface to load. If the set-top box tried to connect automatically with the old password, it will return a connection error. You need to go to the settings menu, usually in the section Settings → Network & Internet or a similar path depending on the version Android TV.
Find your wireless network in the list of available networks. The system may prompt you to "Forget network"—be sure to do this to remove the saved profile with the incorrect password. Then, select the network again. When the virtual keyboard appears, carefully enter the new password. Pay attention to the case, as the password is case-sensitive. Case Sensitive (the difference between uppercase and lowercase letters).
After entering the password, click "Connect." If the password is correct, the status will change to "Connected," and a signal strength icon will appear next to the network name. If the connection fails, check if filtering is enabled on your router. MAC addressesWhen changing security settings, some routers may reset the list of allowed devices, requiring re-authorization.
Encryption Types and Compatibility Table
When setting up a network, it's important to choose the right encryption type to ensure a balance between security and compatibility with all devices in your home. Below is a comparison table of the main security protocols used in modern networks.
| Encryption type | Security | Compatibility | Recommendation |
|---|---|---|---|
| WEP | Low (hack in minutes) | Very high (old devices) | Do not use |
| WPA (TKIP) | Medium (obsolete) | High | Only for old gadgets |
| WPA2 (AES) | High (standard) | Very high | Recommended for everyone |
| WPA3 | Maximum | Medium (new devices) | For modern networks |
As can be seen from the table, the golden mean remains WPA2-PSK (AES)This standard is supported by the vast majority of devices, including Mir TV set-top boxes of various years of production. Using the outdated WEP or TKIP Not only does it slow down your internet speed, it also makes your network vulnerable to data interception.
Troubleshooting and resetting settings
If your Mir TV set-top box fails to connect after changing the password, even though you're sure you entered it correctly, try rebooting the router completely by unplugging it for 10 seconds. Sometimes the router's DHCP module can freeze and not assign a new IP address to the client. It's also worth checking whether the list of connected clients is full, although this is rare for home networks.
If you've forgotten your router's admin panel password and can't change your WiFi settings, your only option is a hard reset. Find the recessed button on the back panel. ResetPress it with a paperclip while the router is turned on and hold it for about 15 seconds until all the lights flash. After this, the router will reset to factory settings, and the WiFi password will be the one on the sticker.
⚠️ Note: Router interfaces and firmware versions are constantly being updated. The location of menu items may differ from that described in the instructions. If you cannot find the item you need, please refer to the documentation for your specific model or the manufacturer's website.
If the problem persists, it may be due to frequency incompatibility. Mir TV set-top boxes can only support the following range: 2.4 GHz, even though you've configured your network to only use 5 GHz. Make sure dual-band mode is enabled on your router or you're trying to connect to the correct frequency.
Frequently Asked Questions (FAQ)
Is it possible to change the WiFi password directly from the Mir TV set-top box remote?
No, the set-top box is a client device and does not control router settings. Password changes can only be made through the router's web interface from a computer or phone.
What happens if I change the network name (SSID) but leave the password the same?
The set-top box will recognize this as a new network. You'll have to re-find the network with the new name in the list and enter the password, as the profile with the old name will become obsolete.
How do I find out who is connected to my WiFi after changing the password?
The router control panel has a "Client List" or "DHCP Clients List" section. It displays all currently connected devices with their MAC addresses.
Do I need to reconfigure the set-top box if I only replaced the router with a new one?
Yes, if the new router has a different network name or password, you will need to reconnect the Mir TV set-top box to the new access point through the settings menu.