Changing the password on your ID Net Wi-Fi router isn't just a routine procedure; it's a necessary step to protect your home network from unauthorized access. Users often encounter situations where internet speeds drop for no apparent reason, or unfamiliar devices appear in the list of connected devices. This is a sure sign that your wireless network access key has been compromised or brute-forced by neighbors.
The process of updating credentials may seem complicated only at first glance. Modern routers supplied by the provider, whether models from ZTE, Huawei or TP-Link, have a standardized management interface. You don't need to be a system administrator to perform this operation; simply follow the steps carefully.
In this article, we'll cover the password change process in detail, focusing on the nuances of encryption and security settings. We'll also cover common errors that occur when attempting to access settings and how to resolve them. Being prepared for changes to your network configuration will help you feel confident using your wireless connection.
Preparing to change security settings
Before making any changes to your router's configuration, you need to ensure a stable connection to the device. It's best to configure the settings by connecting your computer or laptop to the router via LAN cableThis eliminates the risk of connection interruption when saving new parameters, which is especially important when changing the encryption key.
If using a cable isn't possible, make sure your device (smartphone, tablet, or laptop) is connected to the Wi-Fi network whose password you plan to change. Please note: when the new settings are applied, all wireless devices will lose connection to the router. You'll need to reconnect them using the new password you've created.
You'll also need login information for the router's web interface. These are usually found on a sticker located on the bottom of the device. Look for the text Username (often admin) and Password (unique code or also "admin"). If you previously changed your settings password and forgot it, you'll need to perform a full factory reset of your device.
Login to the router control panel
Open any web browser on the connected device. Enter your router's IP address in the address bar. For ID Net equipment, the most commonly used addresses are 192.168.1.1 or 192.168.0.1In some cases, especially on older models ZTE, the address may differ, so check the information on the sticker.
After entering the address and pressing Enter, the authorization page will open. The system will ask for a username and password. By default, most ID Net devices use the login admin and password admin, or the password indicated on the label. Enter the information correctly, observing the case of the characters.
⚠️ Attention: If the settings page doesn't load, check your network card settings. Your computer's IP address should be obtained automatically (DHCP mode). A static IP address from a different subnet will block access to the router interface.
☑️ Check before entry
Successful login will take you to the main control panel (Dashboard). The interface may look different depending on the device model (Huawei, ZTE, Eltex), but the menu layout remains the same. Look for tabs labeled "Network," "WLAN," "Wireless," or "Basic Setup."
Find the Wireless Network (WLAN) section
After logging in, a menu with many options will open. We're interested in the section responsible for wireless communications. In ID Net router interfaces, it's most often labeled as WLAN, Wi-Fi or Wireless network. Navigating to this section will open access to the main signal broadcasting parameters.
Within the WLAN menu, find the security-related subsection. It may be called "Security," "WLAN Security," or "Security Settings." This is where you'll find the fields for changing the network name (SSID) and password. Don't confuse this section with the MAC filtering or guest network settings, if they're located in a separate menu.
Modern dual-band routers may have separate settings for two frequencies: 2.4 GHz and 5 GHz. If you want to change the password for both bands at once, you'll have to repeat the process twice or find the "Merge Settings" option (if supported by your firmware). Make sure you're editing the settings for your main network, not the guest network.
Why do you need different passwords for 2.4 and 5 GHz?
Separating passwords allows you to control the load. You can connect older devices to 2.4 GHz, and modern devices that require high speed to 5 GHz, limiting access to the fast channel to only trusted devices.
Setting up the encryption type and creating a password
In the security section, find the field WPA Pre-Shared Key, Passphrase or simply "Password." Enter a new code of your own creation in the existing field. The password must be at least 8 characters long, but for maximum security, 12 or more characters are recommended.
A critical parameter is the encryption type (Encryption Type or Security Mode). To ensure maximum protection and compatibility with all modern devices, you must select the mode WPA2-PSK (AES)Avoid using the outdated WEP protocol, as it can be cracked in minutes even by a novice, and WPA/TKIP mode, which reduces network speed.
When creating a password, use a combination of uppercase and lowercase letters, numbers, and special characters. Avoid obvious combinations, such as birth dates or keyboard sequences. A complex password is the main barrier to attackers using dictionary-based password cracking.
| Parameter | Recommended value | Description |
|---|---|---|
| Security Mode | WPA2-PSK | A security standard that balances security and speed. |
| Encryption | AES | A data encryption algorithm that is more secure and faster than TKIP. |
| WPA Key | 12+ characters | A complex password with a complex set of characters. |
| SSID Broadcast | Enable | Network visibility for devices (can be hidden for added security). |
Save settings and reboot
After entering a new password and selecting the encryption type, you need to apply the changes. Find the button Apply, Save or SaveOn some ID Net router models, changes take effect only after rebooting the device. If the system doesn't prompt you to reboot automatically, do so manually via the "System Tools" -> "Reboot" menu or by pressing the power button.
When you reboot or apply the Wi-Fi settings, the network will disappear. All previously connected devices will lose their connection. This is normal behavior. The router is now waiting for a connection with a new access key.
Take your smartphone or laptop, find your Wi-Fi network name (SSID) in the list of available networks, and try connecting. Your device will ask for a new password. Enter it and check if the internet connection is available. If the connection is successful, you've completed the procedure correctly.
Solving typical problems and errors
Sometimes users encounter a situation where a new password isn't accepted by devices. This is often due to a typing error: check your keyboard layout, the capitalization (Caps Lock) setting, and the absence of extra spaces at the beginning or end of a line. Also, make sure the device's date and time are set correctly, as desynchronization can interfere with the authorization process.
If your router stops sharing internet after changing the password, you may have accidentally changed other settings, such as the connection type or channel. In this case, resetting the Wi-Fi settings to factory defaults (click the "Restore Default" button in the Wi-Fi section) and repeating the process will help.
⚠️ Attention: Router interfaces can be updated remotely by your provider. If you don't see the menu items described above, check the latest instructions for your specific model on the manufacturer's website or in your ID Net account.
If you've forgotten your router settings password (admin panel), and the default admin/admin password isn't working, you'll need to perform a hard reset. To do this, press and hold the Reset button on the device for 10-15 seconds. The router will return to factory settings, and you'll need to reconfigure your internet connection settings (PPPoE, L2TP, or Dynamic IP) provided by your ISP.
Frequently Asked Questions (FAQ)
What should I do if I forgot my new Wi-Fi password?
If none of your devices remember the password, you'll have to connect to the router via cable and re-enter the settings. There, in the WLAN Security section, you'll be able to see the current password (sometimes hidden by asterisks, but you can reveal it by clicking the eye or changing the field type) or set a new one.
Is it possible to change the password through the app on the phone?
Yes, if your router supports mobile app management (for example, Huawei AI Life or specialized apps from ID Net). Otherwise, use a mobile browser to access the router's IP address, as described in the instructions.
Does changing your password affect your internet speed?
Changing your password itself doesn't affect speed. However, if you've changed the encryption type from TKIP to AES or switched to WPA2/WPA3, your connection speed and stability may actually improve due to optimized data transfer protocols.
Do I need to reconfigure my router after a reset?
Yes, a full reset deletes all settings, including your ISP connection information (PPPoE/L2TP login and password). Make sure you have your ID Net contract handy to restore internet access.