How to change the Wi-Fi password on a Ufanet router: 3 proven methods

Forgot your home Wi-Fi password or want to update it for security? If your internet service provider (ISP) UfanetThe password change procedure depends on the router model and connection method. In this article, we'll cover all the current methods: router web interface, mobile application And Ufanet personal accountWe'll also explain how to choose a strong password and what to do if you lose access to your settings.

Changing your Wi-Fi password not only protects you from neighbors who might be "hooking" on your network, but also prevents cyberattacks. According to 2026 statistics, More than 30% of home networks in Russia use standard passwords like "admin" or "12345678", making them an easy target for hackers. Ufanet offers routers from various manufacturers, from TP-Link to Keenetic, so there's no one-size-fits-all guide. We've compiled up-to-date information for all popular models.

1. How to find out the model of your Ufanet router

Before changing your password, you need to determine which router you have. The settings interface and the path to the section depend on the model. Wi-Fi.

Ways to find out the model:

• 🔍 Look at the sticker on the back of the router - it indicates the model (for example, TP-Link TL-WR841N or Keenetic Giga) and factory login data.
• 📱 In the Ufanet mobile app (if installed), the model is displayed in the section Equipment.
• 🖥️ In the router's web interface (read how to access it in the next section), the model is usually indicated on the main page or in the section System tools.

If the sticker has worn off and the app is not installed, try the standard IP addresses for login:

• 192.168.1.1 — for most Ufanet routers;
• 192.168.0.1 - alternative option;
• keenetic.link — for devices Keenetic.

⚠️ Note: If your router is rented from Ufanet, changing the password through the web interface may reset your provider's settings. In this case, after changing the Wi-Fi password, check to see if your internet connection is lost. If necessary, reboot the router.

2. Changing the password via the router's web interface

This is the most reliable method and works on all models. The instructions may vary slightly depending on the firmware version, but the general procedure is the same.

Steps for most routers:

1. Connect to the router via cable (LAN) or via Wi-Fi (if you know the current password).
2. Open your browser and type in the address bar 192.168.1.1 (or another IP if the standard one doesn't work).
3. Enter your username and password to log in. This is usually:
   • Login: admin
   • Password: admin or ufanet (if you haven't changed it).

Go to the section Wi-Fi, Wireless network or Wireless (the name depends on the model).

Find the field Wi-Fi password (or Wireless Password, Key). Enter a new password.

Save settings (button Save, Apply or OK).

Reboot the router (you can do this through the section System tools or a button on the body).

For routers Keenetic the path will be different:

1. Come on in keenetic.link.
2. Go to Home Network → Segments → Main Wi-Fi Network.
3. In the section Security change the password in the field Network key.
4. Click Apply.

The new password contains at least 8 characters|

Letters, numbers and special characters are used|

The password does not match the previous ones|

Internet connection did not disappear after the changes-->

3. Instructions for popular Ufanet router models

Below are detailed paths for the routers most commonly installed by Ufanet.

If your model isn't listed in the table, use the general instructions in the previous section. The key is to find the wireless network settings section.

⚠️ Attention: On routers Huawei, installed by Ufanet, access to some sections may be disabled. In this case, change the password through provider's personal account (instructions in the next section).

What should I do if I can't access my router settings?

If the standard login/password (admin/admin) don't fit, try:

1. Press the button Reset on the router (hold for 10 seconds) - this will reset the settings to factory settings.

2. Check the sticker on the router - sometimes Ufanet changes the standard password to a unique one (for example, ufanet1234).

3. Call Ufanet support at 8 800 700 44 33 and specify your login details.

4. Change your password through your Ufanet personal account

Not everyone knows, but Ufanet allows you to manage some router settings directly from personal account On the provider's website. This is convenient if you don't want to fiddle with the router's interface or if you've forgotten your login details.

Step-by-step instructions:

1. Go to the Ufanet website: https://lk.ufanet.ru.
2. Log in using your username (usually this is the contract number or the linked email).
3. Select a section from the menu Services → Internet.
4. Find the block Wi-Fi settings (or Router management).
5. Enter the new password in the field Network key and save the changes.
6. Wait for the router to reboot automatically (it will take 1–2 minutes).

The advantages of this method:

• ✅ You don't need to know your router's IP address or login details.
• ✅ Settings are applied automatically without the risk of resetting.
• ✅ Suitable for rented routers where access to the web interface is limited.

Flaws:

• ❌ Not all router models support remote management.
• ❌ Sometimes changes are applied with a delay of up to 5 minutes.

5. How to create a strong Wi-Fi password

A weak password is like an open door for hackers. According to Kaspersky Lab, in 2026 40% of home network hacks This happened because of weak passwords. Follow these rules:

What should be in the password:

• 🔐 Length not less than 12 characters (optimally - 16).
• 🔤 Combination of uppercase and lowercase letters (AaBbCc).
• 🔢 Numbers and special characters (!@#$%).
• 🎲 Lack of obvious words (password, qwerty, ufanet).

Examples of strong passwords:

• K0ff3e$tr0ng!WiFi
• UfaN3t_2026_Secure@
• 7#vG!pL9$mQ2 (random set)

How to remember a complex password:

• 📝 Use password managers (For example, KeePass or 1Password).
• 📱 Save your password in Notes phone (if the device is protected by a PIN code).
• 🖼️ Take a photo of your password-protected screen and store it in a secure folder.

⚠️ Warning: Never use the following in your Wi-Fi password:

• Your address or house number.
• Pet's date of birth or name.
• Phone number or passport number.

This information can be easily found through social networks.

6. What to do if you forgot your router password

Situation: You want to change your Wi-Fi password, but you don’t remember the login information for your router settings (admin/admin (doesn't work). There are several solutions:

Method 1: Factory reset

1. Press and hold the button Reset on the back panel of the router (10–15 seconds).
2. Wait for the reboot (indicators will blink).
3. Log in to the settings using the standard IP (192.168.1.1) with login/password admin/admin.

Method 2: Recovery via Ufanet

• Call support by phone 8 800 700 44 33.
• Provide your contract number and the operator will reset your password remotely (this does not work for all models).

Method 3: Connecting via cable

If you are connected to the router via LAN-cable, sometimes you can enter the settings without a password (on some models) TP-Link). Try leaving the password field blank or enter ufanet.

What happens after resetting the router?

When resetting to factory settings:

1. The Wi-Fi password will become the default one (indicated on the router sticker).

2. Ufanet's internet settings may reset, requiring re-authorization (the login and password for connecting to the provider's network are usually specified in the contract).

3. All additional settings (guest Wi-Fi, parental controls) will disappear.

7. Common mistakes and their solutions

When changing a Wi-Fi password, users encounter typical problems. Let's look at the most common ones:

If after changing the password the devices do not connect to Wi-Fi:

• 📱 Forget the network on your phone/laptop and reconnect.
• 🔄 Reboot your router (unplug it from the power outlet for 30 seconds).
• 🔍 Check that the new password is entered correctly (case-sensitive!).

FAQ: Answers to frequently asked questions

Is it possible to change the Wi-Fi password via phone without a computer?

Yes, there are two ways:

1. Through Ufanet mobile app (if it supports your router model).
2. Through browser on the phone: connect to Wi-Fi, open 192.168.1.1 and follow the instructions for the web interface.

For Android there are also apps like WiFi Router Manager, but they do not work with all routers.

How many devices can be connected to Ufanet Wi-Fi?

Limitations depend on the router model and tariff:

• Standard routers (TP-Link TL-WR841N) support up to 30–50 devices, but with a large quantity the speed may drop.
• Powerful models (Keenetic Giga, ASUS RT-AX88U) can withstand up to 100+ devices.
• Ufanet does not limit the number of devices per tariff level (except for corporate offers).

If your devices frequently disconnect, try:

• Change the Wi-Fi channel in the router settings (select 5 GHz for less congestion).
• Disable Wi-Fi power saving on phones/laptops.

How do I know who is connected to my Wi-Fi?

Check the list of connected devices:

1. In the router's web interface, find the section DHCP, Clients or Wireless Clients.
2. In the Ufanet mobile app (if there is a monitoring function).
3. Through third-party programs: Wireless Network Watcher (Windows), Fing (Android/iOS).

If you find unfamiliar devices:

• Change your Wi-Fi password.
• Enable MAC address filtering (in the router settings).
• Disable the feature WPS (it is vulnerable to hacking).

Do I need to change the network name (SSID) along with the password?

This is not required, but is recommended for two reasons:

1. Security: Standard names like UFANET_1234 They give out the router model, which makes hacking easier.
2. Convenience: Unique network name (eg. Ivanov_Family_5G) will help not to confuse it with its neighbors.

How to change SSID:

• Find the field in your router settings Network name (SSID).
• Use Latin letters and numbers (no spaces or special characters).
• Do not include personal information (address, last name).

What should I do if the Internet doesn't work after changing my password?

The problem occurs if your Ufanet connection settings have been reset. Check:

1. In the section WAN or Internet router must be specified:
   • Connection type: PPPoE (most often) or DHCP.
   • Ufanet login and password (specified in the agreement).

If the settings have been reset, please re-enter them and save.

Reboot your router.

If it doesn't help, call Ufanet support (8 800 700 44 33) and ask them to check the connection on their end.